Filamenti & Resine 3D

Raise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix. After annealing, PET GF stabilizes its heat resistance at around 120 ℃, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. Compared to glass fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fiber composite printing for strong and cost-effective end-use applications, such as jigs & fixture and functional parts. In addition, PET GF provides multiple color choices.

Highlights:

Low moisture absorption
High dimensional stability
Heat and chemical resistance
Creep resistance
Multiple colors
Cost-effective

Chinchilla flexible 3D printer filament is the softest, best-feeling material in the market today. Created through a combination of premium TPE pellets, Chinchilla’s proprietary blend provides rebound, impact resistance and durability.

Highlights:

Proprietary low-friction exterior allows for smooth feeding
Matte finish provides professional and clean printed parts
Consistent diameter and material properties providing reliable, high-quality prints

Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials: PLA, PLA PRO1, ABS, ABS Fusion+, PA and PAHT CF15.

Highlights:

Water soluble
Dissolves 2 times faster than other PVA
Support compatible with multiple materials

Building on BASF‘s decades of experience in flexible materials, this material is based on the established thermoplastic polyurethane Elastollan, standing for maximum reliability, consistent product quality and cost efficiency. Ultrafuse TPU 64D is easily compatible with water soluble support. Thanks to its property profile, Ultrafuse TPU64D presents an excellent alternative to rubber and ABS for the manufacturing of tools, jigs, and fixtures.

Highlights:

High resistance to oils, greases, oxygen and ozone
High wear and abrasion resistance
High impact resistance
Compatible with water soluble support
Printable on direct drive and bowden style printers

Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range.

Highights:

Excellent chemical resistance
Low density
Low moisture uptake
High heat resistance
Improved UV resistance

Ultrafuse PC/ABS FR is a V-0 flame retardant blend of Polycarbonate and Acrylonitrile Butadiene Styrene, two of the most used thermoplastics for engineering & electrical applications.

Highlights:

Fulfills flame retardancy according to UL 94 V-0 (for 1.5 & 3.0 mm thickness)
Outstanding aesthetics
Strong layer adhesion
High print speeds possible

Ultrafuse PLA PRO1 is developed as a high-speed engineering thermoplastic that prints as easy as PLA, at speeds previously considered unusable. Yet it retains far better mechanical properties, that even exceed printed ABS objects. Something that the most demanding users have always had to make a compromise on prior to Ultrafuse PLA PRO1.

Highlights:

Speed: Reduce your printing time by 30% – 80%
Strength: Excels overall beyond printed ABS in mechanical properties
Versatility: One filament that can be tuned towards blazing speed and excellent surface finish
Consistency: Truly consistent filament, also between colors and batches, it will perform as expected, every time

Ultrafuse ABS is strong, flexible with high-temperature resistance. It is a preferred plastic for engineers and professional applications. ABS can be smoothened with acetone and sprayed. To make a proper 3D print with ABS you most probably will need a heated print bed.

Highlights:

Very Tough
Long Life Span
High Wear and Tear
Chemical Resistance

PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.

Highlights:

Excellent thermal properties
High mechanical resistance
Good layer adhesion

PolyFlex™TPU90, created from Covestro’s Addigy® family, is a thermoplastic polyurethane (TPU) based filament designed to provide great flexibility without compromising on printing speed. It also has the ability to resist ultra-violet (UV) light or sunlight.

Highlights:

Incredibly flexible and stretchy
Also suitable for outdoor use
UV-resistant
Long life span

PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.

Highlights:

Water soluble
Good adhesion to different materials

PolyLite™ PC is produced using a polycarbonate resin specifically engineered for 3D printing. It delivers good stiffness and heat resistance with light diffusing properties.

Highlights:

Temperature Resistance
Consistent Quality
Highest Mechanical Strength
Shiny Surfaces

PolyTerra™ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

Highlights:

Better Layer Adhesion
Extra Strength & Toughness
Excellent Mechanical Properties
Wide Range of Applications

PolyLite PETG is a widely used, naturally transparent, plastic that has quickly become a popular 3D printing material. PolyLite ™ PETG lies exactly between the stiff and strong PLA and the rugged, impact-resistant ABS. With added transparency benefits, PETG is a great all-round filament.

Highlights:

Easy to print
Popular material
All-round filament