3D World
Visualizzazione di 4537-4578 di 6446 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 S1 Plus Extrusion Kit
The Creality Ender-3 S1 Plus Extrusion Kit is an original replacement extrusion mechanism for the S1-series Sprite platform. It uses a dual-gear direct-drive design with a 3.5:1 reduction to deliver consistent filament grip and smooth feeding across common materials.
Key Features
Compatible with Ender-3 S1 Plus; also fits S1 and S1 Pro
Dual-gear direct-drive mechanism for reliable filament traction
Approx. 3.5:1 gear reduction and up to ~80 N extrusion force (material-dependent)
Supports 1.75 mm filament (PLA/ABS/TPU/PA/PC and similar)
Drop-in replacement for the Sprite-based carriage on S1-series printers
Factory-matched components for stable, consistent extrusionSKU: 4001020061 -
3D World, Pezzi di ricambio e accessori
E3D V6 Socks Pro 3-Pack
Pro silicone socks are made to insulate the heater block and nozzle for more efficient, stable thermal performance. The pro sock goes a step further than the standard sock, covering the majority of the nozzle, leaving just the tip exposed. This makes it ideal for small nozzles sizes (0.15 and 0.25mm). Made from an inherently non-stick high-temperature silicone, the pro sock helps keep your nozzles and block free from plastic residue.
SKU: 5060567860054 -
3D World, Pezzi di ricambio e accessori
E3D Silicone Socks for Volcano 3-Pack
Silicone Volcano socks offer a huge boost in temperature stability, this particularly important when using high-airflow cooling around the nozzle to cool the print. The additional cooling, combined with reduced heat radiation from the block to the print really boosts the ability to print great overhangs and bridges, all while keeping the HotEnd temperature extremely stable.
SKU: 5060567860061 -
3D World, Pezzi di ricambio e accessori
E3D Volcano HotEnd- 1,75mm – 12V- Bowden
The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you’ve got a printer with a large build volume then the Volcano HotEnd is a must-have.
Highlights:
3 x the volumetric flow rate of the V6 HotEnd
E3D Ecosystem compatible
Maximum printing temperature 300°C
All metal HeatBreakSKU: 5060567862973 -
3D World, Pezzi di ricambio e accessori
E3D V6 All-Metal HotEnd – 1,75 mm – 12V – Bowden
The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application.
Highlights
All metal heatbreak
Maximum temperature: 300ºC
Cartridge style heater block
Groove mountSKU: 5060567860191 -
3D World, Pezzi di ricambio e accessori
Inkspire 2 – Resin Vat
The Inkspire 2 Resin Vat is a precise and durable component engineered for the Zortrax Inkspire 2 3D printer. Featuring a robust frame with high-quality FEP film, it enables smooth resin circulation and crisp detail in prints. Designed for easy installation and maintenance, it ensures long-lasting performance and consistent results.
Key Features
OEM resin vat for Zortrax Inkspire 2
Rigid frame with replaceable FEP film for easy maintenance
Facilitates smooth resin flow and precise printing
Curved corners for straightforward cleaning
Minimizes downtime with hassle-free installation
Built for long-term reliability and premium print qualitySKU: 5902280827818 -
3D World, Pezzi di ricambio e accessori
Inkspire 2 – Resin Tubes Set
The Inkspire 2 Resin Tubes Set is an OEM spare part for the Zortrax Inkspire 2. The set includes three pump tubes and a pipe connector, ensuring reliable resin delivery within the printer’s pump system.
Key Features
OEM spare part for Zortrax Inkspire 2
Includes three pump tubes and one pipe connector
Ensures reliable resin circulation
Essential for maintaining the pump system
Simple to install and replace
Designed for consistent printer performanceSKU: 5902280827863 -
3D World, 3D-Stampanti e altro
Zortrax Curing Station
Zortrax curing station is designed to provide necessary UV curing for models printed on a resin 3D printer and is fully automated. UV exposure time is set individually for each supported resin but usually does not exceed a few minutes. It’s dedicated to post-process even the most professional and demanding types of resin.
Highlights:
Supports most popular resin 3D printing technologies like UV LCD, DLP, and SLA
Easy and safe use
Metal sheets polished according to the class EN 10088-2 2P / ASTM No. 8 with mirror finish, which provides uniform UV exposure for the cured modelsSKU: 5902280827603 -
3D World, 3D-Stampanti e altro
Zortrax Inkspire 2 3D Printer
Zortrax Inkspire 2 is a high-end UV LCD 3D printer designed to work with quality resins in a highly automated, streamlined process. Compared to the old Inkspire, it is larger, more powerful, and better in almost every way. The Inkspire 2, along with its complementing post-processing devices, have been thoroughly validated by world’s leading brands like BASF and Henkel to guarantee that each print has mechanical and thermal properties equal to or better than those declared by the manufacturer.
Highlights:
192 x 120 x 280mm Build Volume
XY precision: 50µ; layer height: 25µ/50µ/100µ
Precalibrated Build Platform
Automated Resin Level ControlSKU: 5902280827559 -
3D World, Pezzi di ricambio e accessori
DropEffect XG Hot-End
Multiple mounting options to fit printers including Prusa, Creality and Voron with attachment options for part cooling fan on the side of the frame.
Features:
New nozzle design to improve heat transfer (M4 thread) and easy one handed nozzle changing
Hotend with heatsink can be removed fast and easy from frame with only two M2 screws
Small and quiet 2510 fan
Separate functions of Nozzle and Heatbreak. The nozzle melts the filament and the heatbreak ensures a sharp temperature transition.
Ring Heater hotend design with ceramic heater for very fast heat up times (280°C in less than 1 minute)SKU: 6973090162894 -
3D World, Pezzi di ricambio e accessori
E3D PT100 Temperature Sensor
Cartridge type PT100 temperature sensor for E3D cartridge type HeaterBlocks.
Key Features:
Max temperature: 500°C
Cartridge diameter: 3mm
Cartridge length: 15mm
Cable length: 50mm
Cable colour: red
Cable connector: Molex microfit 3.0SKU: 5060567864861 -
3D World, Pezzi di ricambio e accessori
E3D Thermistor Cartridge
A replacement E3D cartridge type Semitec 104NT thermistor suitable for all E3D HotEnds using a cartridge type Heaterblock.
Key Features:
Max temperature rating: 300°C
Cartridge diameter: 3mm
Cartridge length: 15mm
Cable Length: 50mm
Cable Colour: Blue
Connector type: Molex Microfit 3.0SKU: 5060567864823 -
3D World, Pezzi di ricambio e accessori
E3D High Precision Heater Cartridge – 24V – 40W
Looking for more stable temperature performance? High precision heater cartridges are the suitable answer for your E3D HotEnd. An upgrade suitable for HotEnds using an E3D V6 or Volcano HeaterBlock.
Key Features:
Cartridge diameter: 6 mm
Cartridge length: 20 mm
Cable length 1 m (when extension attached)
Quick disconnectSKU: 5060567864908 -
3D World, Pezzi di ricambio e accessori
E3D High Precision Heater Cartridge – 12V – 40W
Looking for more stable temperature performance? High precision heater cartridges are the suitable answer for your E3D HotEnd. An upgrade suitable for HotEnds using an E3D V6 or Volcano HeaterBlock.
Key Features:
Cartridge diameter: 6 mm
Cartridge length: 20 mm
Cable length 1 m (when extension attached)
Quick disconnectSKU: 5060567864922 -
3D World, Pezzi di ricambio e accessori
E3D Standard Heater Cartridge – 24V – 40W
A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your HotEnd hot quickly and hit the highest of temperatures.
SKU: 5060567864953 -
3D World, Pezzi di ricambio e accessori
E3D Standard Heater Cartridge – 12V – 40W
A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your HotEnd hot quickly and hit the highest of temperatures.
SKU: 5060567864984 -
3D World, Pezzi di ricambio e accessori
E3D V6 Socks 3-Pack
Upgrade your E3D V6 Hot End with the E3D Silicone Sock. This handy pack of 3 V6 socks will keep your 3D printer running smoother for longer. Silicone socks offer small but significant changes to make 3D printing with E3D HotEnds even easier, cleaner, and faster. They cling tightly to the heater block and last longer than ever before!
SKU: 5060567860047 -
-
-
-
-
-
3D World, Pezzi di ricambio e accessori
CreatBot F430 / Peek 300 U disk reader PCB
The CreatBot F430 / PEEK-300 U Disk Reader PCB is an original replacement part designed for use with the F430 and PEEK-300 3D printers. It functions as the USB flash drive reader, allowing direct file transfer to the printer via U disk.
Key Features
OEM U disk reader PCB for CreatBot F430 and PEEK-300
Provides USB flash drive reading functionality
Supports direct file transfer to the printer
Ensures reliable and stable data connection
Easy to install as a replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
E3D V6 Nozzle X 0,8 mm – 1,75 mm – 1 pcs
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
SKU: 5060567863079 -
3D World, Pezzi di ricambio e accessori
E3D V6 Nozzle X 0,6 mm – 1,75 mm – 1 pcs
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
SKU: 5060567866629 -
3D World, Pezzi di ricambio e accessori
E3D V6 Nozzle X 0,5 mm – 1,75 mm – 1 pcs
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
SKU: 5060567863093 -
3D World, Pezzi di ricambio e accessori
E3D V6 Nozzle X 0,4 mm – 1,75 mm – 1 pcs
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
SKU: 5060567866636 -
3D World, Pezzi di ricambio e accessori
E3D V6 Gold Edition HotEnd – 1,75mm – 12V
All the best V6 parts carefully curated to make the V6 Gold. More than just its shiny appearance, this HotEnd is built for outstanding performance with all filaments and optimised for high-temperature and abrasive 3D printing.
‘Gold’ Heat SinkKey features
‘Gold’ anodised Heatsink
Maximum printing temperature: 285ºC
Plated copper heater block
Hardened steel nozzle
High precision heater cartridge
Groove mount
Capricorn TubingSKU: 5060567860269 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender 3 S1 Heating Tube
The Creality 3D Ender-3 S1 Heating Tube is a genuine hotend heater cartridge designed to reliably heat the heating block of the Ender-3 S1 and S1 Pro. Operating at 24 V and 50 W (40 W variant also available), it features a compact 6 × 20 mm ceramic-core element with an approximate 40–43 mm cable terminated with a 2-pin JST XH 2.54 connector. This ensures efficient, precise heating for consistent filament melting and print quality.
Key Features
Original Creality heater cartridge for Ender-3 S1 / S1 Pro
24 V operation at 50 W (40 W option available)
Ceramic-core element for stable and reliable heating
Compact dimensions: 6 × 20 mm, approx. 40–43 mm cable
Standard 2-pin JST XH 2.54 connector for easy swap-in
Ensures precise, consistent hotend temperaturesSKU: 3103010078 -
3D World, Pezzi di ricambio e accessori
Creality 3D Heating Tube_24V_50W_D6×20_L50_XH2.54-2P
The Creality 24V 50W Heating Tube (D6×20, L50, XH2.54-2P) is a genuine replacement heating element for Creality 3D printers. It delivers fast and stable heating performance, ensuring consistent extrusion and reliable print quality across different materials.
Key Features
OEM heating tube for Creality 3D printers
Power: 50W, Voltage: 24V
Dimensions: Diameter 6 × 20 mm, Length 50 mm
XH2.54-2P connector for easy installation
Provides fast and stable heating
Ensures consistent extrusion with various filamentsSKU: 3103010079
