3D World
Visualizzazione di 5839-5880 di 6446 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Flashforge Creator Pro Y-axis Stepper Motor Cable
The Flashforge Creator Pro Y-axis Stepper Motor Cable is an OEM spare part designed to connect the Y-axis stepper motor to the control board. It ensures stable power delivery and signal transmission, enabling reliable axis movement and consistent printing performance.
Key Features
OEM Y-axis stepper motor cable for Flashforge Creator Pro
Provides stable connection between motor and control board
Ensures accurate Y-axis movement
Durable construction for long-term use
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D N2 Extruder Motor Cable 2.6 m
The Raise3D N2 Extruder Motor Cable 2.6 m is a genuine replacement cable designed to connect the extruder motor to the control board in the N2 series printers.
Key Features
2.6 meter cable length
Specifically for extruder motor connection
Compatible with Raise3D N2 series
Original Raise3D spare part
Reliable performance and durability
Easy to installSKU: 6970240722144 -
3D World, Pezzi di ricambio e accessori
Raise3D Pro2 Filament Run-out Sensor Control Board
Replacement control board for the filament run-out sensor, compatible with Raise3D Pro2-series printers (Pro2 and Pro2 Plus). Used to replace a faulty board and restore filament run-out detection.
Key Features
Compatibility: Raise3D Pro2-series (Pro2, Pro2 Plus)
Function: handles the signal from the filament run-out sensor
Use case: replacement part to restore detection
Installation: recommended for qualified users or service technicians
Contents: 1 × control boardSKU: 6970240721796 -
3D World, Pezzi di ricambio e accessori
CreatBot Right Extuder Assembly – D/F-series – old design
Compatible only with the previous extruder version and cannot be used with the updated design. This assembly is made for the right extruder on CreatBot, F430, D600 (1.75 mm), and D600 Pro (1.75 mm). Please note that it is not suitable for models equipped with 2.85 mm extruders. Comes complete with extruder motor.
SKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Hot-End (420°C) with Martensite Steel Nozzle
Brass hot end for temperatures up to 420°C. Equipped with a Martensite Steel Nozzle and a hole for a 3mm temperature sensor and a full metal heatbreak.
Fit for
F160
F430
D600
D600 Pro
D600 Pro2 (with 3mm temp sensor)
F1000
D1000 (with 3mm temp sensor)SKU: A24112A -
3D World, Pezzi di ricambio e accessori
CreatBot F160 / F430 Mainboard
The CreatBot F160 / F430 Mainboard is an original motherboard designed to manage printer functions including motion control, temperature, and hardware communication.
Key Features
Compatible with CreatBot F160 and F430 models
Original spare mainboard from CreatBot
Manages motor drivers, extruder control, temperature sensors
Communicates with firmware and touchscreen interface
Supports reliable operation of hotend and heated bed
Includes necessary connectors for power and sensorsSKU: A24110A -
3D World, Pezzi di ricambio e accessori
CreatBot Power Supply 24V 350W
The CreatBot Power Supply 24V 350W is an original replacement unit that delivers stable power to CreatBot printers. Rated at 24 V and 350 W, it is designed to maintain reliable operation during continuous printing.
Key Features
OEM 24 V / 350 W power supply
Provides stable, reliable power delivery
Compatible with CreatBot DE-series, DX-series, F160, F430, D600 and D600 Pro (also listed for PEEK-300)
Ready-to-install replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D Top Cover for N2 and Pro2 series
The Raise3D Top Cover for N2 and Pro2 series is an original accessory designed to provide better thermal stability during 3D printing. By keeping the build chamber enclosed, it helps maintain consistent temperatures, reduces warping, and improves print quality when working with advanced materials.
Key Features
OEM top cover for Raise3D N2 and Pro2 series
Improves thermal stability in the build chamber
Reduces warping and cracking when printing technical filaments
Supports consistent printing performance
Durable and easy to installSKU: 6970240721550 -
3D World, Pezzi di ricambio e accessori
Wanhao Duplicator 9 Mark 2 PVC Mat Build Surface 425 x 425 mm
3D World, Pezzi di ricambio e accessoriWanhao Duplicator 9 Mark 2 PVC Mat Build Surface 425 x 425 mm
The Wanhao Duplicator 9 Mark 2 PVC Mat Build Surface (425 × 425 mm) is a practical replacement print surface designed for the D9 MK2 3D printer. Made from durable PVC, it provides good adhesion during printing and makes it easier to remove finished models once cooled. A simple way to keep your printer running smoothly with consistent results.
Key Features
Replacement build surface for Wanhao Duplicator 9 Mark 2
Size: 425 × 425 mm
Durable PVC material for long-term use
Provides strong adhesion while printing
Makes part removal easier after cooling
Helps maintain stable print qualitySKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality Heater Block Silicone Cover MK7/MK8/MK9 – 1-pack
Original Creality silicone heat block cover for MK7, MK8 and MK9 hotends. Designed to fit Creality CR-10, CR-10S, Ender-3, Ender-5 and CR-20 series printers. Made from durable silicone, it helps to stabilize temperature and protect the heater block for longer life.
Key Features
Made of non-stick silicone material
Keeps hotend temperature stable
Protects heater block and extruder from dirt
High temperature resistance: up to 280℃
Compatible with MK7 / MK8 / MK9 Creality hotends
Contents: 1 × silicone coverSKU: n/a -
-
3D World, Pezzi di ricambio e accessori
Flashforge Creator3 Camera Cable
The Flashforge Creator3 Camera Cable is a replacement cable used for connecting the camera module to the Creator 3 printer. Cable only; camera module not included.
Key Features
Compatible with Flashforge Creator 3
Replacement cable only (camera module sold separately)
Ensures stable camera connection for live streaming or monitoring
Helps maintain print supervision features
OEM or high compatibility spare part
Simple to install in existing setupSKU: n/a -
-
-
3D World, Pezzi di ricambio e accessori
Zortrax M300 / M300 Plus Z-axis Stepper Motor
The Z-axis stepper motor for the Zortrax M300 and M300 Plus drives the build platform up and down with precision. If the platform refuses to move, moves unevenly, or makes unusual noises, replacing this motor restores smooth and reliable vertical movement. It’s a direct fit spare part designed for easy installation.
Key Features
Original-spec Z-axis stepper motor for Zortrax M300 / M300 Plus
Controls vertical movement of the build platform
Precise step control ensures accurate layer positioning
Helps resolve platform stalling, skipping, or noisy operation
Easy replacement following Zortrax service guidelines
Package includes: 1× Z-axis stepper motorSKU: 5902280822196 -
3D World, Pezzi di ricambio e accessori
Zortrax M200 Plus / M300 Plus / M300 Dual Z-Coupler v2
The Zortrax Z-Coupler v2 is an original replacement part for the Z-axis drive of M200 Plus, M300 Plus, and M300 Dual printers. It joins the stepper motor shaft to the Z-lead screw, ensuring reliable vertical motion and print bed positioning.
Key Features
OEM Z-axis coupler for M200 Plus / M300 Plus / M300 Dual
Connects motor shaft to Z lead screw
Supports stable and accurate vertical movement
v2 revision for the listed models
Direct-fit replacement minimizes downtime
Durable construction for long-term useSKU: 5902280823605 -
3D World, Pezzi di ricambio e accessori
Zortrax Heatbed without Perforated Plate for M200 Plus
The Zortrax Heatbed without Perforated Plate for M200 Plus is a genuine replacement component responsible for platform heating. Designed to maintain optimal build plate temperature, it improves print adhesion and can be used with or without a separate build surface.
Key Features
Official Zortrax replacement part for M200 Plus
Includes aluminum base plate, heatbed PCB, 3 bed magnets, and mounting screws
Operates without perforated build surface
Enhances thermal performance of build platform
Enables consistent heating across the build area
Direct installation with original hardwareSKU: 5902280823490 -
3D World, Pezzi di ricambio e accessori
Wanhao Duplicator i3 Plus Mark2 Z-axis End-Stop Switch
The Wanhao Duplicator i3 Plus Mark2 Z-axis End-Stop Switch with cable is an OEM spare part designed for precise printer homing. It ensures the Z-axis stops at the correct position. Officially listed as “Wanhao Duplicator i3 Plus Mark2 Z-axis End-Stop Switch”.
Key Features
OEM Z-axis end-stop switch with cable
Designed for Wanhao Duplicator i3 Plus Mark2
Ensures accurate Z-axis homing
Includes cable for easy installation
Reliable operation for consistent printsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Zortrax M300 / M300 Plus / M300 Dual GT2 Belt X/Y (long)
The Zortrax M300 / M300 Plus / M300 Dual GT2 Belt X/Y (long) is an original replacement timing belt designed for the X- and Y-axis motion system. It ensures precise transmission between stepper motors and the printhead, supporting stable and accurate large-format printing.
Key Features
OEM GT2 belt for Zortrax M300 series printers
Fits M300, M300 Plus, and M300 Dual models
Controls synchronized X/Y-axis movement
Maintains print accuracy over large build areas
Durable design for extended use
Direct-fit replacement for reliable performanceSKU: 5902280822219 -
3D World, Pezzi di ricambio e accessori
Creality 3D Magnetic Build Surface 310 x 310 mm
Upgrade your 3D printer with the Creality Magnetic Build Surface, measuring 310 x 310 mm. This flexible and durable build plate provides excellent adhesion for your prints and makes model removal effortless. Designed for easy installation and compatibility with a wide range of FDM 3D printers, it’s the perfect surface for PLA and other common filaments.
Highlights
310 × 310 mm surface – ideal for larger build volumes
Strong magnetic base with quick-release top sheet
Excellent adhesion when hot, easy removal when cool
No glue, tape or sprays required
Durable, heat-resistant and reusable over many cycles
Compatible with various Creality and other FDM printersSKU: 791294088453 -
3D World, Pezzi di ricambio e accessori
PrimaFIX adhesive – Prevent warping
Elevate your 3D printing experience with the revamped PrimaFIX adhesive. Tailored for those passionate about perfect prints, our adhesive now comes in a sleek, redesigned bottle packed with enhanced features. Discover printing like never before!
SKU: 7340002114934 -
3D World, Pezzi di ricambio e accessori
CreatBot F160 / F430 Filament Cooling Fan
The CreatBot Filament Cooling Fan for F160 / F430 is a radial 24V DC fan used for part cooling. It helps maintain optimal print quality by cooling the filament immediately after extrusion. An essential replacement when the fan is noisy, underperforming, or broken.
Key Features
Made for CreatBot F160 and F430 printers
Radial fan design for focused airflow on the filament
24V DC operation
Improves cooling of PLA, PETG, TPU and other filaments
Reduces stringing, overheating and drooping on overhangs
Easy to install as a direct replacementSKU: A23991A -
3D World, Pezzi di ricambio e accessori
CreatBot 4510 Filament Cooling Fan
The Filament Cooling Fan (model 4510) for CreatBot D600 and D600 Pro is a precision component that rapidly cools the filament immediately after extrusion, improving layer adhesion and reducing warping.
Key Features
Compatible with CreatBot D600 and D600 Pro (and other CreatBot models using the 4510 fan)
Dimensions: 45×45×10 mm
Operates at 12 V (model 4510)SKU: A23990A -
3D World, Pezzi di ricambio e accessori
CreatBot F430 Extuder Motor
The CreatBot F430 Extruder Motor is an original replacement part designed for the F430 3D printer. It drives the extruder mechanism, ensuring stable and precise filament feeding for consistent print quality.
Key Features
OEM extruder motor for CreatBot F430
Provides accurate and stable filament feeding
Supports consistent extrusion performance
Durable and reliable construction
Easy to replace during maintenanceSKU: A23988A -
3D World, Pezzi di ricambio e accessori
CreatBot Mainboard – DE/DX-series
The CreatBot Mainboard for DE and DX series is an original replacement part designed to restore reliable performance to your printer. It provides stable control of all essential printing functions and ensures consistent operation. *Correct firmware must be installed by the user.
Key Features
Original mainboard for CreatBot DE and DX series
Ensures stable printer control and performance
Supports all essential printing functions
Easy to install replacement part
*Requires correct firmware installation by the userSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F430 / D600 Pro Auto-Level Sensor
The Auto-Level Sensor for CreatBot F430 and D600 Pro is a replacement/upgrade part that enables automatic bed leveling. It helps the printer measure the build plate and compensate height variations for a reliable first layer and consistent print quality.
Key Features
Compatible with CreatBot F430 and D600 Pro
Enables automatic bed leveling/probing
Improves first-layer adhesion and consistency
Assists in compensating for build-plate irregularities
Requires Z-offset calibration after installation
Replacement part for restoring leveling functionalitySKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F160 Extruder PCB
The CreatBot F160 Extruder PCB is an original replacement part designed for the F160 3D printer. It controls the extruder’s heating and sensor connections, ensuring stable operation and consistent printing performance.
Key Features
OEM extruder PCB for CreatBot F160
Controls extruder heating and sensors
Supports reliable extrusion performance
Ensures stable printer operation
Easy to replace during maintenanceSKU: n/a -
-
-
-
-
