Pezzi di ricambio e accessori
Visualizzazione di 589-630 di 4709 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10 Smart Filament Runout Sensor Kit
The Creality 3D CR-10 Smart Filament Runout Sensor Kit is a complete detection system designed to detect filament runout or breakage during printing. Engineered for reliable automatic print pausing and smooth continuation, it’s compatible with 32-bit Creality boards and helps prevent failed prints.
Key Features
Complete runout sensor kit for CR-10 Smart
Intelligent detection pauses print when filament runs out
LED indicator shows filament status
Includes sensor, mounting plate, and cable
Compatible with 32-bit boards (e.g. v4.2.2 / v4.2.7)
Prevents failed prints due to filament depletion or breakageSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-30 Motor Wire + Filament Sensor Kit Combo
The Creality CR-30 Motor Wire + Filament Sensor Kit Combo is a spare parts combo built to restore or upgrade the motor wiring and filament detection on the CR-30 PrintMill.
Key Features
Includes motor wire and filament sensor
Plug-and-play replacement for CR-30 (PrintMill)
Helps avoid failed prints by detecting filament runout
OEM part with reliable performance
Cost-effective solution for maintenance or repair
Easy to installSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-30 5010 Axial Fan
The Creality CR-30 5010 Axial Fan is a high-performance replacement fan for main board cooling, rated at 24V, with a 50×50×10 mm form factor.
Key Features
5010 size: 50×50×10 mm axial fan
Operating voltage: 24V DC
Current draw approx. 0.10 A
About 6000 ±15% RPM speed
Red-black wire, XH2.54-2P male terminal
Used for cooling the main board in CR-30 printersSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-30 Heating Tube
The Creality CR-30 Heating Tube is a genuine replacement part designed to provide consistent heating performance for your 3D printer’s hotend. Built for durability and stability, it ensures reliable extrusion and helps maintain high print quality.
Key Features
OEM heating tube for Creality CR-30
Ensures stable and even heating of the hotend
Supports consistent filament extrusion
Durable design for long-term use
Easy to install as a direct replacement
Maintains print quality and reliabilitySKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-30 Screen Kit
The Creality CR-30 Screen Kit is a replacement LCD display with knob/button for the CR-30 PrintMill, enabling control of print jobs via screen input.
Key Features
LCD + knob interface for CR-30
Original Creality spare part
Easy to install with supplied cabling
Restores or replaces screen functionality
Allows navigation of menus and settings from screen
Improves usability compared to broken or missing screensSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender 7 Hotbed Kit
The Creality 3D Ender 7 Hotbed Kit is a genuine replacement for the heated build plate on the Ender 7. It restores fast, even heating and helps ensure reliable first-layer adhesion. Designed with matching connectors and built to original specs, installation is quick and keeps your printer running smoothly.
Key Features
OEM heated bed kit for Creality Ender 7
Restores even and stable bed temperature
Improves first-layer adhesion and print reliability
Quick swap with matching connectors
Durable surface for regular use
Built to original factory specificationsSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D BX, H2 Heat block
The BIQU BX H2 Heat Block is a high-quality component designed to deliver stable and efficient heating for your 3D printers hotend. Optimized for the H2 extruder system, this compact heat block ensures precise temperature control and excellent thermal conductivity for smooth filament extrusion.
Key Features
Designed for the BIQU H2 extruder system
Stable and uniform heat distribution
Compatible with standard M6 nozzles
Durable aluminum alloy construction
Compact design for lightweight extruders
Easy installation and reliable performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D BX Heatbreak
The BIQU BX Heat Break is a precision-machined component designed for efficient thermal isolation in the BIQU BX hotend. Its smooth internal surface and heat-resistant structure ensure reliable filament flow and improved print quality, even during high-temperature operation.
Key Features
Compatible with BIQU BX hotend
Stainless steel for high thermal stability
Reduces heat creep and filament jams
Smooth bore for optimal extrusion flow
Ideal for high-temp and standard filamentsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Z-axis End-Stop Cable
The Artillery Hornet Z-axis End-Stop Cable is an official replacement cable designed to connect the Z-axis end-stop switch to the controller board on the Artillery Hornet 3D printer. This flexible cable ensures reliable signal transmission for accurate Z-axis positioning.
Key Features
Compatible only with Artillery Hornet printer
OEM replacement cable for Z-axis end-stop connection
Flexible design for smooth routing along the printer frame
Ensures stable signal for precise homing performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Y-axis End-Stop Cable
Replacement Y-axis end-stop cable for the Artillery Hornet. Connects the Y end-stop switch to the control board to provide a reliable homing/limit signal for accurate positioning.
Key Features
Compatibility: Artillery Hornet (Y-axis end-stop circuit)
Links the Y end-stop switch to the mainboard for homing and limit detection
Pre-terminated connectors for quick, solder-free installation
Direct 1:1 replacement for damaged or intermittent cables
Designed to follow the printer’s original internal routing
Installation tip: power off the printer and verify Y home after replacementSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Y-axis Stepper Motor Cable
Replacement Y-axis stepper motor cable for the Artillery Hornet. Connects the control board’s stepper driver to the Y-axis stepper motor to provide reliable bed/carriage motion.
Key Features
Compatibility: Artillery Hornet (Y-axis stepper motor connection).
Function: Harness between the mainboard stepper driver and the Y-axis stepper motor.
Direct 1:1 replacement with factory-length, keyed connectors, and original routing.
Pre-terminated plugs for quick, solder-free installation.
Restores consistent Y driving when the original cable is worn, pinched, or intermittent.
Installation tip: power off; route as original, avoid sharp bends, secure with ties; re-home and verify Y travel.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Internal USB Connection Cable
Replacement internal USB connection cable for the Artillery Hornet 3D printer. It links the printer’s internal USB interface/port to the control board, ensuring stable data communication and reliable device recognition.
Key Features
Compatible with Artillery Hornet (internal USB link)
Connects the internal USB interface/port to the control board
Pre-terminated plug-and-play connectors, no soldering required
Direct 1:1 replacement for damaged, loose, or faulty cables
Designed to follow original internal routing for a neat installation
Installation note: power off the printer and observe ESD precautionsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Extruder Cover
Replacement extruder cover for the Artillery Hornet. This protective shroud encloses the toolhead area, helps manage wiring, and provides the mounting interface for the hotend heatsink/fans and ducts.
Key Features
Compatibility: Artillery Hornet (extruder/toolhead cover).
Function: Protects the hotend zone and organizes cable routing; supports fan/duct mounting.
Direct 1:1 replacement matching the factory mounting points and clearances.
Restores clean airflow around the heatsink and improves serviceability.
Designed to fit the original harness path; avoids wire chafing and snagging.
Installation tip: power off and cool the hotend; transfer fans/ducts from the old cover, avoid pinching wires, and verify fan operation.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Print Head Cover
The Artillery Hornet Print Head Cover is an original replacement part for the Hornet 3D printer. It protects and encloses the print head assembly, covering the hotend, fans, and wiring for safe and reliable operation.
Key Features
Print head cover for Artillery Hornet
Protects extruder components
Covers hotend, fans, and wiring
Ensures safe and organized assembly
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Extruder Arm
The Artillery Extruder Arm is an original replacement part for Artillery 3D printers such as the Sidewinder X1 and Genius. It holds the filament in place against the drive gear, ensuring stable and consistent feeding into the extruder.
Key Features
Extruder arm for Artillery 3D printers
Keeps filament securely in place
Works with the drive gear for stable feeding
Ensures consistent extrusion quality
Durable and easy to replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery X/Y-axis Belt – 750 mm
The GT2 Belt for the X- and Y-axis on Artillery Hornet, Genius, and Genius Pro is a precision replacement part designed for accurate motion transmission. With a length of 750 mm, it ensures stable and consistent movement of the print head and bed, supporting high-quality print results.
Key Features
Compatible with Artillery Hornet, Genius, and Genius Pro
GT2 belt type for precise motion control
Length: 750 mm
Ensures stable and accurate axis movement
Durable construction for reliable performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Z-axis Lead Screw
Replacement Z-axis lead screw for the Artillery Hornet. This precision threaded screw drives the vertical motion of the build platform, providing smooth and accurate layer positioning.
Key Features
Compatibility: Artillery Hornet (Z-axis mechanism)
Transfers motion from the Z motor to the platform via trapezoidal thread
Direct 1:1 replacement for a bent, worn, or noisy lead screw
Helps reduce wobble/backlash and restores consistent Z movement
Installs using the original coupler and Z nut (not included unless stated)
Maintenance tip: lightly lubricate and check alignment after installationSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Heat Sink
Replacement heat sink for the Artillery Hornet hotend. The finned cold-end dissipates heat from the heatbreak to prevent heat creep and maintain stable extrusion.
Key Features
Compatibility: Artillery Hornet (hotend heat sink/cold-end).
Function: Draws heat away from the heatbreak to keep filament solid above the melt zone.
Direct 1:1 replacement; fits the factory mounting points and fan/duct layout.
Lightweight metal construction with fins for efficient airflow.
Restores reliable retractions and reduces jams from overheating.
Installation tip: power off and fully cool; transfer the fan/duct and heatbreak carefully; keep airflow unobstructed.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet PTFE Tube – ∅2 x ∅4 / 21 mm
Pre-cut PTFE tube segment (∅2 mm ID × ∅4 mm OD, 21 mm length) for the Artillery Hornet. Sits inside the hotend/heatbreak to guide 1.75 mm filament with low friction and provide thermal isolation for stable feeding.
Key Features
Compatibility: Artillery Hornet (hotend liner).
Dimensions: ∅2 mm inner, ∅4 mm outer, length 21 mm.
Function: Low-friction liner for 1.75 mm filament; helps maintain a consistent melt path.
Direct 1:1 replacement for a burnt, deformed, or worn PTFE insert.
Improves extrusion reliability and reduces jams/stringing when renewed.
Installation tip: power off and cool; ensure square ends and full seating against the nozzle/heatbreak.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet PTFE Tube – ∅2 x ∅4 / 46 mm
The Artillery Hornet PTFE Tube (∅2 × ∅4 / 46 mm) is an original replacement part for the Hornet 3D printer. It guides the filament within the extruder system, ensuring smooth feeding and reliable print performance.
Key Features
OEM PTFE tube for Artillery Hornet
Inner diameter: 2 mm / Outer diameter: 4 mm
Length: 46 mm
Provides smooth filament feeding
Durable and heat-resistant materialSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Heat Bed
The Artillery Hornet Heat Bed is an original replacement part for the Hornet 3D printer. It provides even heating across the build surface, ensuring strong adhesion during printing and reducing the risk of warping.
Key Features
OEM heat bed for Artillery Hornet
Provides uniform heating for stable printing
Ensures reliable first-layer adhesion
Helps minimize print warping
Durable and easy to replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet End-Stop Limit Switch
The Artillery Hornet End-Stop Limit Switch is an original replacement switch designed for the Hornet 3D printer series. It detects the position of the print head at the end of an axis, ensuring accurate homing and safe operation during printing.
Key Features
Original spare part from Artillery 3D for the Hornet series
Mechanical limit switch for detecting axis end positions
Ensures precise homing and alignment safety
Compact and durable design adapted for Hornet printers
Easy replacement to maintain accuracy and performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Print Head Connection Board
The Artillery Hornet Print Head Connection Board is an original replacement part for the Hornet 3D printer. It manages the electrical connections between the print head components, including the extruder, hotend, and cooling fans, ensuring reliable signal and power transmission.
Key Features
OEM connection board for Artillery Hornet
Located at the print head assembly
Connects extruder, hotend, and fans
Ensures stable power and signal transfer
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Extruder Board
The Artillery Hornet Extruder Board is a replacement board that controls extruder operations in the Hornet printer, managing motor signals and filament feed.
Key Features
OEM replacement board for Artillery Hornet
Handles extruder motor signals and filament feed control
Restores functionality in case of board failure
Easy to install replacement
Cost-efficient spare partSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Power Supply
Replacement power supply for the Artillery Hornet 3D printer. It replaces the original AC-to-DC unit that powers the mainboard, heaters, and motors, ensuring stable and reliable operation.
Key Features
Compatibility: Artillery Hornet
Converts AC mains to the DC rail used by printer electronics
Direct 1:1 replacement for failed, unstable, or noisy units
Match output voltage/current and DC plug type to the original label
Regional mains cable/plug may vary; use correct cable for your region
Safety: disconnect from AC power before installation or serviceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Left Filament Cooling Fan – 40 x 40 x 10 mm
Original left filament cooling fan for Artillery Hornet 3D printers. This 40 × 40 × 10 mm, 24 V fan ensures stable airflow to cool the extruded filament, preventing overheating and improving print quality. Designed as a direct OEM replacement for the left-side cooling system.
Key Features
Compatible with Artillery Hornet
Left filament cooling fan
Size: 40 × 40 × 10 mm
Operating voltage: 24 V
Ensures stable filament cooling and print consistency
OEM replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Right Filament Cooling Fan – 40 x 40 x 10 mm
3D World, Pezzi di ricambio e accessoriArtillery Hornet Right Filament Cooling Fan – 40 x 40 x 10 mm
The Artillery Hornet Right Filament Cooling Fan (40 × 40 × 10 mm) is an original replacement part designed to provide effective cooling for printed layers. By maintaining optimal airflow, it improves adhesion, reduces warping, and ensures consistent print quality.
Key Features
Original cooling fan for Artillery Hornet
Dimensions: 40 × 40 × 10 mm
Provides stable airflow for filament cooling
Improves surface quality and layer adhesion
Durable and easy to installSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Print Head Fan – 30 x 30 x 10 mm
The Print Head Fan for Artillery Hornet is an original replacement cooling fan designed to maintain optimal hotend performance. Measuring 30 × 30 × 10 mm and operating at 24 V, it provides stable airflow for efficient cooling, helping prevent overheating and support consistent extrusion quality.
Key Features
Original print head cooling fan for Artillery Hornet
Dimensions: 30 × 30 × 10 mm
Operating voltage: 24 V
Provides stable airflow for efficient cooling
Helps prevent hotend overheating
Easy to install and replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-3040 Pro 5010 Axial fan
The Creality 3D CR-3040 Pro 5010 Axial Fan is a compact cooling fan designed to maintain stable airflow inside the CR-3040 Pro. The 50×50×10 mm form factor provides efficient, directed cooling for components that benefit from continuous air circulation, supporting consistent print quality during long jobs. It’s a straightforward replacement for worn fans and helps keep the system running reliably.
Key Features
Designed for Creality CR-3040 Pro
Compact 50×50×10 mm axial form factor
Steady airflow for stable, repeatable print results
Durable construction suited for extended runtime
Straightforward swap for aging or noisy fans
Helps maintain consistent temperatures around critical componentsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-3040 Pro 6025 Axial fan
The Creality CR-3040 Pro 6025 Axial Fan is an OEM replacement fan for the printer enclosure, designed to provide effective cooling and maintain stable operating temperatures. It helps reduce heat buildup, improves reliability, and supports consistent print quality under long or high-demand prints.
Key Features
OEM 6025 axial fan for Creality CR-3040 Pro
60 × 60 × 25 mm size
12 V operating voltage
High-speed airflow to reduce heat buildup
Durable build for continuous operation
Easy drop-in replacement for your enclosure fanSKU: n/a -
3D World, Pezzi di ricambio e accessori
F160/DX/DE X,Y motor (42HS48)
Stepper motor for the X and Y axes of CreatBot F160, DX, and DE 3D printers. Original CreatBot part (type 42HS48) with directly installed cable—no connector required.
Key Features
Original CreatBot spare part
Compatible with F160, DX, and DE models
Type: 42HS48 stepper motor
Cable permanently attached—no connector neededSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-30 Belt kit
The Creality 3D CR-30 Belt Kit is an official replacement set designed for the belt-driven system of the CR-30. Built to original specifications, it restores smooth and accurate motion and helps keep the printer running reliably over time.
Key Features
OEM belt kit for Creality CR-30
Restores precise belt-driven motion
Built to original factory specifications
Durable materials for long-term use
Supports consistent print quality
Quick and easy installationSKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D E3 Right Print Head with Silicon Carbide Nozzle 0.4mm
3D World, Pezzi di ricambio e accessoriRaise3D E3 Right Print Head with Silicon Carbide Nozzle 0.4mm
The Raise3D E3 Right Print Head with Silicon Carbide Nozzle 0.4mm is an original replacement print head for Raise3D E3 Series printers. It is designed to deliver stable, consistent printing performance and is suitable for a wide range of everyday applications.
Key Features
Original right print head for Raise3D E3 Series
Silicon carbide nozzle with 0.4mm orifice
Designed for consistent extrusion and reliable results
Suitable for general-purpose printing tasks
Intended for maintenance or replacement needsSKU: 6942267307147
