Pezzi di ricambio e accessori
Visualizzazione di 2983-3024 di 4709 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
BondTech Single Extruder
BondTech single extruder for N-series
Highlights:
Eliminate feed issues with its increased torque and controlled feeding
Enable faster print speeds with sustained quality
Increase reliability with flexible materials
Increase performance and print qualitySKU: 6970240722038 -
3D World, Pezzi di ricambio e accessori
Raise3D Pro2 Filament Run-out Sensor
Print large objects and material intensive pieces fearlessly. The Filament Run-Out Sensor add-on is a job-saving feature that detects when you’ve reached the end of your filament, and saves your project until you can return to reload.
SKU: 6970240722502 -
3D World, Pezzi di ricambio e accessori
Snapmaker Linear Module – 20mm – A350T-upgraded version
The Snapmaker Linear Module – 20mm (Upgraded Version) is a high-precision motion component specifically designed for Snapmaker 2.0 A350T and F350 machines. With integrated TMC2209 stepper motor drivers and an optimized lead screw, it delivers smoother, quieter, and more accurate movement. Built with an all-metal enclosure and engineered for easy installation, its the ideal upgrade for enhancing your Snapmakers reliability and performance.
Key Features
Integrated TMC2209 drivers ensure ultra-quiet and precise operation
Optimized 20mm lead screw for smoother linear motion
Durable all-metal housing for long-lasting performance
Fully enclosed design resists dust and contaminants
Plug-and-play compatibility with A350T and F350 models
Designed specifically for X and Y axes on 2.0 upgraded machinesSKU: 6971573440170 -
3D World, Pezzi di ricambio e accessori
Snapmaker Linear Module – 8mm-A350T-upgraded version
The Snapmaker Linear Module – 8mm (Upgraded Version) is a precision-engineered motion component designed specifically for the Z-axis of Snapmaker 2.0 A350T and F350 models. Featuring integrated TMC2209 stepper motor drivers, an optimized 8mm lead screw, and a robust all-metal construction, this module enhances vertical motion control, ensuring smoother and quieter operations.
Key Features
Optimized 8mm lead screw for precise Z-axis movement
Integrated TMC2209 drivers for ultra-quiet operation
Durable all-metal, enclosed design for longevity
Seamless compatibility with Snapmaker 2.0 A350T and F350 models
Engineered for easy installation and maintenance
Ideal for upgrading or replacing Z-axis modulesSKU: 6971573440163 -
3D World, Pezzi di ricambio e accessori
DropEffect XG M4 Threaded Plated Copper Nozzle 0.8/1.75mm
The DropEffect XG M4 Threaded Plated Copper Nozzle (0.8/1.75 mm) is a high-quality nozzle designed for precise filament extrusion. Made from plated copper with M4 threading, it ensures reliable performance and durability in demanding 3D printing applications.
Key Features
Nozzle size: 0.8 mm
Filament diameter: 1.75 mm
M4 threaded design
Plated copper for strength and heat transfer
Durable construction for long-term use
High precision for consistent extrusionSKU: 6973090163136 -
3D World, Pezzi di ricambio e accessori
DropEffect XG M4 Threaded Plated Copper Nozzle 0.6/1.75mm
The DropEffect XG M4 Threaded Plated Copper Nozzle (0.6 / 1.75 mm) is a precision nozzle designed for the DropEffect XG hot-end. The copper-plated material offers improved thermal conductivity, while the M4 thread ensures compatibility with DropEffect and other M4-hot ends. Ideal for prints requiring medium flow and detail with reliable temperature performance.
Key Features
0.6 mm orifice for balanced flow and detail
Plated copper material for better heat transfer
M4 thread – fits DropEffect XG hot ends and other M4-compatible systems
Fits standard 1.75 mm filament diameter
Reliable spare when original nozzle shows wearSKU: 6973090163129 -
3D World, Pezzi di ricambio e accessori
DropEffect XG M4 Threaded Plated Copper Nozzle 0.4/1.75mm
The DropEffect XG M4 Threaded Plated Copper Nozzle 0.4 / 1.75 mm is a precision nozzle designed for DropEffect XG hot ends. Its plated copper construction ensures excellent thermal conductivity, while the 0.40 mm orifice delivers sharp details with consistent filament flow. A reliable choice for high-quality prints requiring accuracy and stability.
Key Features
0.40 mm orifice for detailed and accurate prints
Plated copper for improved heat transfer and durability
M4 thread – fits DropEffect XG and other M4-compatible hot ends
Designed for 1.75 mm filament
Dependable replacement when the original nozzle is wornSKU: 6973090163112 -
3D World, Pezzi di ricambio e accessori
DropEffect XG M4 Threaded Plated Copper Nozzle 0.2/1.75mm
The DropEffect XG M4 Threaded Plated Copper Nozzle is a high-precision nozzle with M4 threading and copper plating. Designed for smooth heat transfer and fine detail printing.
Key Features
Diameter 0.2 mm (also available in 0.4 / 0.6 / 0.8 mm)
For 1.75 mm filament
Copper-plated for better heat conduction and smoother extrusion
M4 thread – fits DropEffect XG hotend and compatible systems
Ideal for detailed models, prototypes, and precision printsSKU: 6973090163105 -
3D World, Pezzi di ricambio e accessori
DropEffect XG M4 Threaded Brass Nozzle 0.8/1.75mm
The DropEffect XG M4 Threaded Brass Nozzle (0.8 mm, 1.75 mm filament) is a precision-machined nozzle for M4-thread hotends. With a 0.8 mm orifice, it allows higher flow rates and faster printing while maintaining reliable extrusion. The brass construction ensures excellent thermal conductivity, ideal for standard materials.
Key Features
M4 threaded brass nozzle
Orifice: 0.8 mm
Filament: 1.75 mm
High flow rate for faster printing
Excellent thermal conductivity
Best for PLA, PETG, ABS and other non-abrasive filaments
Not suitable for abrasive composites (use hardened nozzles)SKU: 6973090163051 -
3D World, Pezzi di ricambio e accessori
DropEffect XG M4 Threaded Brass Nozzle 0.6/1.75mm
The DropEffect XG M4 Threaded Brass Nozzle (0.6 mm, 1.75 mm filament) is a precision-machined nozzle designed for M4-thread hotends. The 0.6 mm orifice offers a good balance of speed and detail, while the brass body provides excellent thermal conductivity for steady extrusion with common materials.
Key Features
M4 threaded brass nozzle
Orifice: 0.6 mm
Filament: 1.75 mm
Good thermal conductivity and stable flow
Ideal for PLA, PETG, ABS and similar non-abrasive filaments
Not recommended for abrasive composites (use hardened nozzles)SKU: 6973090163044 -
3D World, Pezzi di ricambio e accessori
DropEffect XG M4 Threaded Brass Nozzle 0.4/1.75mm
The XG M4 Threaded Brass Nozzle 0.4/1.75 mm is a high-quality replacement nozzle for 3D printers using 1.75 mm filament. Made from durable brass, it provides excellent thermal conductivity and precise extrusion, making it ideal for standard printing with a balance of speed and detail.
Key Features
M4 threaded brass nozzle
Orifice size: 0.4 mm
Compatible with 1.75 mm filament
Provides smooth and accurate extrusion
Durable and easy to replace
Suitable for standard printing applicationsSKU: 6973090163037 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 S1 Pro Silent Mainboard
The Creality Ender-3 S1 Pro Silent Mainboard (v2.4.S1) is a genuine 32-bit control board featuring TMC2208 silent motor drivers and pre-installed firmware optimized for the Ender-3 S1 series. With noise levels under 50 dB and built-in thermal runaway protection, it delivers reliable, plug-and-play performance.
Key Features
32-bit motherboard based on STM32F401RCT6 for high performance
Integrated TMC2208 drivers for ultra-quiet operation (< 50 dB)
Firmware pre-configured for Ender-3 S1 series (plug-and-play)
Optimized circuitry with thermal runaway protectionSKU: 4002020050 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 S1 Plus Extrusion Kit
The Creality Ender-3 S1 Plus Extrusion Kit is an original replacement extrusion mechanism for the S1-series Sprite platform. It uses a dual-gear direct-drive design with a 3.5:1 reduction to deliver consistent filament grip and smooth feeding across common materials.
Key Features
Compatible with Ender-3 S1 Plus; also fits S1 and S1 Pro
Dual-gear direct-drive mechanism for reliable filament traction
Approx. 3.5:1 gear reduction and up to ~80 N extrusion force (material-dependent)
Supports 1.75 mm filament (PLA/ABS/TPU/PA/PC and similar)
Drop-in replacement for the Sprite-based carriage on S1-series printers
Factory-matched components for stable, consistent extrusionSKU: 4001020061 -
3D World, Pezzi di ricambio e accessori
E3D V6 Socks Pro 3-Pack
Pro silicone socks are made to insulate the heater block and nozzle for more efficient, stable thermal performance. The pro sock goes a step further than the standard sock, covering the majority of the nozzle, leaving just the tip exposed. This makes it ideal for small nozzles sizes (0.15 and 0.25mm). Made from an inherently non-stick high-temperature silicone, the pro sock helps keep your nozzles and block free from plastic residue.
SKU: 5060567860054 -
3D World, Pezzi di ricambio e accessori
E3D Silicone Socks for Volcano 3-Pack
Silicone Volcano socks offer a huge boost in temperature stability, this particularly important when using high-airflow cooling around the nozzle to cool the print. The additional cooling, combined with reduced heat radiation from the block to the print really boosts the ability to print great overhangs and bridges, all while keeping the HotEnd temperature extremely stable.
SKU: 5060567860061 -
3D World, Pezzi di ricambio e accessori
E3D Volcano HotEnd- 1,75mm – 12V- Bowden
The Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you’ve got a printer with a large build volume then the Volcano HotEnd is a must-have.
Highlights:
3 x the volumetric flow rate of the V6 HotEnd
E3D Ecosystem compatible
Maximum printing temperature 300°C
All metal HeatBreakSKU: 5060567862973 -
3D World, Pezzi di ricambio e accessori
E3D V6 All-Metal HotEnd – 1,75 mm – 12V – Bowden
The V6 is our flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application.
Highlights
All metal heatbreak
Maximum temperature: 300ºC
Cartridge style heater block
Groove mountSKU: 5060567860191 -
3D World, Pezzi di ricambio e accessori
Inkspire 2 – Resin Vat
The Inkspire 2 Resin Vat is a precise and durable component engineered for the Zortrax Inkspire 2 3D printer. Featuring a robust frame with high-quality FEP film, it enables smooth resin circulation and crisp detail in prints. Designed for easy installation and maintenance, it ensures long-lasting performance and consistent results.
Key Features
OEM resin vat for Zortrax Inkspire 2
Rigid frame with replaceable FEP film for easy maintenance
Facilitates smooth resin flow and precise printing
Curved corners for straightforward cleaning
Minimizes downtime with hassle-free installation
Built for long-term reliability and premium print qualitySKU: 5902280827818 -
3D World, Pezzi di ricambio e accessori
Inkspire 2 – Resin Tubes Set
The Inkspire 2 Resin Tubes Set is an OEM spare part for the Zortrax Inkspire 2. The set includes three pump tubes and a pipe connector, ensuring reliable resin delivery within the printer’s pump system.
Key Features
OEM spare part for Zortrax Inkspire 2
Includes three pump tubes and one pipe connector
Ensures reliable resin circulation
Essential for maintaining the pump system
Simple to install and replace
Designed for consistent printer performanceSKU: 5902280827863 -
3D World, Pezzi di ricambio e accessori
DropEffect XG Hot-End
Multiple mounting options to fit printers including Prusa, Creality and Voron with attachment options for part cooling fan on the side of the frame.
Features:
New nozzle design to improve heat transfer (M4 thread) and easy one handed nozzle changing
Hotend with heatsink can be removed fast and easy from frame with only two M2 screws
Small and quiet 2510 fan
Separate functions of Nozzle and Heatbreak. The nozzle melts the filament and the heatbreak ensures a sharp temperature transition.
Ring Heater hotend design with ceramic heater for very fast heat up times (280°C in less than 1 minute)SKU: 6973090162894 -
3D World, Pezzi di ricambio e accessori
E3D PT100 Temperature Sensor
Cartridge type PT100 temperature sensor for E3D cartridge type HeaterBlocks.
Key Features:
Max temperature: 500°C
Cartridge diameter: 3mm
Cartridge length: 15mm
Cable length: 50mm
Cable colour: red
Cable connector: Molex microfit 3.0SKU: 5060567864861 -
3D World, Pezzi di ricambio e accessori
E3D Thermistor Cartridge
A replacement E3D cartridge type Semitec 104NT thermistor suitable for all E3D HotEnds using a cartridge type Heaterblock.
Key Features:
Max temperature rating: 300°C
Cartridge diameter: 3mm
Cartridge length: 15mm
Cable Length: 50mm
Cable Colour: Blue
Connector type: Molex Microfit 3.0SKU: 5060567864823 -
3D World, Pezzi di ricambio e accessori
E3D High Precision Heater Cartridge – 24V – 40W
Looking for more stable temperature performance? High precision heater cartridges are the suitable answer for your E3D HotEnd. An upgrade suitable for HotEnds using an E3D V6 or Volcano HeaterBlock.
Key Features:
Cartridge diameter: 6 mm
Cartridge length: 20 mm
Cable length 1 m (when extension attached)
Quick disconnectSKU: 5060567864908 -
3D World, Pezzi di ricambio e accessori
E3D High Precision Heater Cartridge – 12V – 40W
Looking for more stable temperature performance? High precision heater cartridges are the suitable answer for your E3D HotEnd. An upgrade suitable for HotEnds using an E3D V6 or Volcano HeaterBlock.
Key Features:
Cartridge diameter: 6 mm
Cartridge length: 20 mm
Cable length 1 m (when extension attached)
Quick disconnectSKU: 5060567864922 -
3D World, Pezzi di ricambio e accessori
E3D Standard Heater Cartridge – 24V – 40W
A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your HotEnd hot quickly and hit the highest of temperatures.
SKU: 5060567864953 -
3D World, Pezzi di ricambio e accessori
E3D Standard Heater Cartridge – 12V – 40W
A powerful little beast of a heater. Get rid of fragile and poorly toleranced enamel resistors and switch to a purpose made high power ceramic heater cartridge. Get your HotEnd hot quickly and hit the highest of temperatures.
SKU: 5060567864984 -
3D World, Pezzi di ricambio e accessori
E3D V6 Socks 3-Pack
Upgrade your E3D V6 Hot End with the E3D Silicone Sock. This handy pack of 3 V6 socks will keep your 3D printer running smoother for longer. Silicone socks offer small but significant changes to make 3D printing with E3D HotEnds even easier, cleaner, and faster. They cling tightly to the heater block and last longer than ever before!
SKU: 5060567860047 -
-
-
