Pezzi di ricambio e accessori
Visualizzazione di 3277-3318 di 4709 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-2 Pro 5010 Axial Fan
The Creality 5010 Axial Fan for Ender-2 Pro is a 24V 50×50×10 mm cooling fan designed for control board and electronic component cooling. It uses a 2-pin XH2.54 connector and comes with approximately 100 mm cable. Lightweight (≈16 g), it’s suited to replace worn fans or improve thermal reliability.
Key Features
Size: 50×50×10 mm axial fan (5010)
Voltage: 24V
Connector: 2-pin XH2.54 with ~100 mm cable
Weight ≈ 16 grams
Used for cooling control board / electronics
Light replacement for stock fan or as spareSKU: 3205010057 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-2 Pro Cable Combination Package
The Creality Ender-2 Pro Cable Combination Package is a spare parts bundle designed to replace worn or damaged wires on the Ender-2 Pro. It includes the display line, motor cable, limit switch cables, and more—everything needed to restore reliable operation of electronics and control components.
Key Features
Cable bundle for Ender-2 Pro: display, motor, and limit switch lines
Compatible with official Creality Ender-2 Pro models
Packs inside protective packaging (approx. 230×180×20 mm)
Net weight ~80 g; gross weight ~85 g
Helps prevent connection failures, signal loss, or erratic behavior caused by damaged cables
Easy swap — plug-and-play replacements for original cable linesSKU: 4006030057 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-2 Pro X Axis Tensioner Kit
The Creality Ender-2 Pro X-Axis Tensioner Kit is a genuine replacement part designed to adjust and maintain the proper belt tension on the printer’s X-axis. By ensuring smooth and stable belt movement, it helps improve print accuracy and reduces wear during long-term use.
Key Features
OEM X-axis tensioner kit for Ender-2 Pro
Keeps the X-axis belt properly tensioned
Improves accuracy and stability in prints
Reduces wear and extends belt lifespan
Durable construction for reliable performance
Easy to install as a direct replacementSKU: 2102011538 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-2 Pro Y-axis Tensioner Kit
The Creality Ender-2 Pro Y-axis Tensioner Kit is a replacement part designed to improve belt tension and reduce slack in the Y-axis. It includes the idler, adjustment knob, and mounting screws to ensure precise belt alignment. A small upgrade that can yield better print quality and reduce artifacts from belt slop.
Key Features
Full Y-axis tensioner assembly for Ender-2 Pro
Includes idler pulley and adjustment knob
Mounting hardware included for direct swap
Helps maintain proper belt tension and reduce belt vibration
Improves dimensional accuracy and print surface finish
Easy installation, minimal tools requiredSKU: 2102011533 -
3D World, Pezzi di ricambio e accessori
Creality 3D Hotend Accessory Kit
The Creality 3D Hotend Accessory Kit is an original replacement set designed for a wide range of Creality printers, including Ender-3 V2, Ender-5 Pro, Ender-5 Plus, Ender-6, Ender-2 Pro, Ender-3, and Ender-3 Pro. It provides the essential hotend components needed to ensure stable extrusion, reliable heating, and consistent print quality.
Key Features
Original Creality hotend accessory kit
Compatible with Ender-3 V2, Ender-5 Pro, Ender-5 Plus, Ender-6, Ender-2 Pro, Ender-3, Ender-3 Pro
Ensures stable extrusion and accurate filament flow
Includes essential hotend replacement components
Durable construction for long-term performance
Easy to install and maintainSKU: 4007010106 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-2 Pro Display kit 2.8″
The Creality Ender-2 Pro Display Kit 2.8″ is an official replacement screen designed specifically for the Ender-2 Pro 3D printer. This kit includes the 2.8-inch LCD display module with matching firmware compatibility. It restores full control of print settings, status monitoring, and printer navigation without having to use external devices.
Key Features
2.8-inch LCD display module
Official Creality replacement part (Part No. 4001050040) :contentReference[oaicite:0]{index=0}
Compatible with the Ender-2 Pro series :contentReference[oaicite:1]{index=1}
Allows control of print settings and status from the machine directly
Restores built-in screen navigation without reliance on external devices
Easy installation, designed to fit in place of the existing display housingSKU: 4001050040 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-2 Pro Limit switch
The Creality 3D Ender-2 Pro Limit Switch is an OEM replacement endstop switch used for detecting the end position on the X or Z axes. It connects via a 3-pin (2-wire signal) port and is vital for accurate homing and protection against moving past the physical limits of the machine.
Key Features
Original Creality limit switch for Ender-2 Pro
3-pin connector, utilizes 2 wires for the signal
Used for X and/or Z axis endstop detection
Helps ensure accurate homing, improves print alignment
Compact design matching original switch dimensions
Easy to install as a spare part for damaged or misaligned endstopsSKU: 2101030025 -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Z-axis Board (Old Version)
The Artillery Sidewinder X1 Z-Axis Board (Old Version) is an original replacement PCB designed for early versions of the Sidewinder X1 3D printer. It controls Z-axis motor signals and ensures reliable vertical motion, making it an essential spare part for maintaining performance in older models.
Key Features
OEM Z-axis control board for Sidewinder X1
Compatible with early versions (V1–V3)
Manages signals for Z-axis motor operation
Ensures stable and accurate vertical movement
Direct-fit replacement for older machines
Supports long-term printer reliabilitySKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Touch Screen Extension Cord (For Older Versions)
3D World, Pezzi di ricambio e accessoriArtillery Sidewinder X1 Touch Screen Extension Cord (For Older Versions)
The Touch Screen Extension Cord for Artillery 3D Sidewinder X1 is an original spare part designed for older versions of the Sidewinder X1. With a length of 120 mm, it connects the touch screen to the control board, ensuring reliable communication and stable operation.
Key Features
Touch Screen Extension Cord for Artillery Sidewinder X1
For older versions only
Length: 120 mm
Ensures stable connection between screen and control board
Easy to replace during maintenanceSKU: n/a -
-
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 S1 Cable Combination Package
Ensure optimal performance of your Creality Ender 3 S1 3D printer with the Official Cables Combination Package. This set includes original replacement cables designed for seamless integration, maintaining the printers efficiency and reliability. Each cable matches the original specifications, ensuring easy installation and consistent performance.
Key Features
Original replacement cables for Creality Ender 3 S1
Includes screen cable, flat cable, X-axis, and Y-axis motor limit cables
Constructed from durable metal and plastic materials
Direct fit with consistent interface and length
Easy installation without modificationsSKU: 4007010121 -
3D World, Pezzi di ricambio e accessori
BIQU Orbiter Extruder V2.0 with Motor Double Gear Direct Drive For Voron 2.4/CR-10/Ender3 V2/PRO
3D World, Pezzi di ricambio e accessoriBIQU Orbiter Extruder V2.0 with Motor Double Gear Direct Drive For Voron 2.4/CR-10/Ender3 V2/PRO
Experience high-performance filament control with the BIQU Orbiter V2.0 – a compact, lightweight direct drive extruder featuring a dual-gear system for powerful grip, ultra-precise extrusion, and smooth retractions. Engineered in collaboration with LDO Motors, this upgraded version delivers exceptional print reliability across all materials.
Key Features
Dual-drive gears for strong filament grip and reduced slippage
Ultra-lightweight design (219 g including motor)
7.51 gear ratio for precise, responsive extrusion
Ideal for flexible filaments like TPU as well as PLA, PETG, ABS
Compact size for space-efficient printer setups
High-quality stepper motor includedSKU: 6973828110951 -
3D World, Pezzi di ricambio e accessori
Bondtech LGX Shortcut X-carriage for MK3S
The Bondtech LGX Shortcut X-carriage for MK3S is an original replacement part designed for mounting the LGX Shortcut extruder and hotend system on the Prusa MK3S. It provides a stable and precise platform, ensuring proper alignment and reliable printing performance.
Key Features
Original Bondtech X-carriage for Prusa MK3S
Designed for the LGX Shortcut extruder and hotend
Ensures stable and precise mounting
Supports accurate alignment of nozzle and axes
Durable construction for long-term use
Easy to install as a replacement partSKU: 7350011416028 -
3D World, Pezzi di ricambio e accessori
Bondtech LGX Shortcut Copperhead for Prusa MK3S
The Bondtech LGX Shortcut Copperhead for Prusa MK3S is a direct drive upgrade kit that replaces the original extruder. It combines Bondtech’s LGX™ Large Gears Extruder with Slice Engineering’s Copperhead hotend, delivering improved extrusion control, high temperature capability, and reliable performance across a wide range of materials.
Key Features
Direct drive upgrade for Prusa MK3S
Includes Bondtech LGX extruder and Copperhead hotend
High temperature support for advanced materials
Improved filament grip and extrusion precision
Compatible with flexible and abrasive filaments
Durable and reliable performanceSKU: 7350011416004 -
3D World, Pezzi di ricambio e accessori
Bondtech LGX Shortcut Mosquito For Prusa MK3S
The Bondtech LGX Shortcut Mosquito for Prusa MK3S is a direct drive upgrade kit designed to replace the original extruder on the Prusa MK3S. It combines Bondtech’s Large Gears eXtruder (LGX) with the Slice Engineering Mosquito hotend, delivering precise extrusion, high flow capacity, and reliable printing with a wide range of materials.
Key Features
Direct drive upgrade for Prusa MK3S
Includes Bondtech LGX extruder and Mosquito hotend
Improved precision and filament control
Compatible with flexible and abrasive materials
High flow rate for demanding applications
Reliable and consistent extrusionSKU: 7350011415946 -
3D World, Pezzi di ricambio e accessori
Creality 3D High-speed M6 Nozzle 0,4 mm
The Creality 3D High-speed M6 Nozzle 0.4 mm is designed for smooth and efficient extrusion, even at higher print speeds. Made from durable brass with a precise 0.4 mm orifice, it ensures reliable flow and sharp details. Compatible with printers using M6 threaded hotends, it’s quick to swap and built for consistent results.
Key Features
High-speed nozzle with M6 thread
0.4 mm orifice for detail and flow balance
Durable brass construction
Reliable extrusion at fast print speeds
Quick and simple replacement
Compatible with M6 hotend systemsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Bondtech CHT® Coated Brass Nozzle 0,5 mm -1 pcs
These are nozzles for High Flow applications
They are manufactured by Bondtech in-house.Features
1 unit per pack
Available sizes : 0.60, 0.8, 1.0, 1.4 and 1.8mm
Optimized for 1.75mm filament
Requires 6mm wrenchSKU: 7350011414888 -
3D World, Pezzi di ricambio e accessori
Creality 3D Power Supply A-150FGD-24
The Creality 3D Power Supply A-150FGD-24 is an original Mean Well unit designed to deliver stable 24V power to your 3D printer. With 150W output capacity, it ensures consistent performance, safe operation, and long-term reliability for your machine.
Key Features
OEM Mean Well 150W power supply
Delivers stable 24V output
Ensures safe and reliable operation
Compact design suited for Creality printers
Built for efficiency and durability
Easy installation and replacementSKU: 3102030110
