Artillery X1 Z-axis Coupler
8 disponibili
Replacement Z-axis coupler for the Artillery Sidewinder X1. Connects the Z stepper motor shaft to the lead screw and transfers torque for reliable vertical motion.
Key Features
Compatibility: Artillery Sidewinder X1 (Z-axis motor-to-lead-screw coupling).
Function: Mechanical shaft coupler linking the stepper shaft to the Z lead screw.
Direct 1:1 replacement; fits the original motor and lead screw interfaces.
Helps restore smooth Z travel and reduce wobble from worn or slipping couplers.
Machined metal body with set screws for a secure, concentric grip.
Installation tip: power off; align shafts, match the set screw to the flat, tighten evenly, and avoid bottoming the shafts.
6,45€
8 disponibili
Accoppiatore asse Z specifico del modello per Sidewinder X1. Sostituisce un accoppiatore usurato per mantenere il movimento Z stabile e la consistenza dello strato. Installare con l’alimentazione spenta e successivamente ricontrollare l’homing Z.
Artillery X1 Z-axis Coupler
Based on 0 reviews
Be the first to review “Artillery X1 Z-axis Coupler”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFELT – 1.75mm – 0.25 kg
LAY-FELT is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FELT contains felt like features and is part of the PORO-LAY series of filaments. This material is highly porous. LAY-FELT is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
All objects are hot-sealable after drying
you may print without heated bed
the objects have near zero warp (deformation while printing)
Design rules: print less walls/shells and less filling % to shorten rinsing timeSKU: n/a -
3D World, Filamenti & Resine 3D
Taulman t-glase PETT – 2.85mm – 450g – Black
Taulman3D has now released its low temperature, high strength industrial t-glase filament line into the desktop 3D printing community. T-glase, which is short for tough glass, is a specially engineered high strength industrial 3D printer filament for users that print with PLA or lower temperature desktop 3D Printers.
Features
Taulman t-glase is Manufactured in the U.S.A.
Very High Strength
Optimum printing temperature is about 235°C to 240°C, but will print down to 230°C and up to about 248°CSKU: 0634654248220 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFOMM 60, 1.75mm, 0.25 kg
LAY-FOMM 60 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 60 is a foamy material and is highly porous. LAY-FOMM 60 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. LAY-FOMM 60 is slightly firmer than LAY-FOMM 40.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
All objects are hot-sealable after drying
the objects have near zero warp (deformation while printing)SKU: 0634654248398
There are no reviews yet.