Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2
28 disponibili
Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2
13,44€
28 disponibili
Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2
Based on 0 reviews
Be the first to review “Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Snow White
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233620 -
3D World, Filamenti & Resine 3D
PORO-LAY – GELLAY – 1.75mm – 0.25 kg
Gellay filament from the Porolay series is a very special material. With it, soft parts can be created and you can finally print out your organs from the 3D printer – of course not functional. But for e.g. aquaristics from the 3D printer, this gel-like printing material is very exciting. Like all other Porolay filaments, Gellay is also hard in its initial state and easy to print.
Main features
When wet: gel-like and very soft
In dry state: Stable, not elastic but bendable
Perfect for soft tissues
Low warpingSKU: 0634654248411 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFELT – 1.75mm – 0.25 kg
LAY-FELT is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FELT contains felt like features and is part of the PORO-LAY series of filaments. This material is highly porous. LAY-FELT is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
All objects are hot-sealable after drying
you may print without heated bed
the objects have near zero warp (deformation while printing)
Design rules: print less walls/shells and less filling % to shorten rinsing timeSKU: n/a -
3D World, Filamenti & Resine 3D
POROLAY – LAYFOMM 40 – 1.75mm – 0.25 kg
LAY-FOMM 40 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 40 is a foamy material and is highly porous. LAY-FOMM 40 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
Polymer components of LAY-FOMM 40 are harmless and foodsafe.
All objects are hot-sealable after dryingSKU: 0634654248374
Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2
28 disponibili
Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2
13,44€
28 disponibili
Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2
Based on 0 reviews
Be the first to review “Creality Extruder Front shell kit for K2 Plus / K2 Pro / K2”
You must be logged in to post a review.
There are no reviews yet.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
PORO-LAY – GELLAY – 1.75mm – 0.25 kg
Gellay filament from the Porolay series is a very special material. With it, soft parts can be created and you can finally print out your organs from the 3D printer – of course not functional. But for e.g. aquaristics from the 3D printer, this gel-like printing material is very exciting. Like all other Porolay filaments, Gellay is also hard in its initial state and easy to print.
Main features
When wet: gel-like and very soft
In dry state: Stable, not elastic but bendable
Perfect for soft tissues
Low warpingSKU: 0634654248411 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFELT – 1.75mm – 0.25 kg
LAY-FELT is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FELT contains felt like features and is part of the PORO-LAY series of filaments. This material is highly porous. LAY-FELT is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
All objects are hot-sealable after drying
you may print without heated bed
the objects have near zero warp (deformation while printing)
Design rules: print less walls/shells and less filling % to shorten rinsing timeSKU: n/a -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFOMM 40, 3.00 mm, 0.25 kg
LAY-FOMM 40 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 40 is a foamy material and is highly porous. LAY-FOMM 40 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
Polymer components of LAY-FOMM 40 are harmless and foodsafe.
All objects are hot-sealable after dryingSKU: 0634654248381
There are no reviews yet.