CreatBot F160 / F430 Right Filament Sensor
Esaurito
Right-side filament sensor for CreatBot F160 and F430. Detects filament presence/run-out (and, where supported, movement) to allow the printer to pause safely and prompt for reload.
Key Features
Compatibility: CreatBot F160 and F430; for F430 this is the right-extruder filament path.
Function: Signals filament presence/run-out to the control board for pause/resume handling.
Right-specific orientation and cabling; not interchangeable with the left sensor on dual-extruder setups.
Direct 1:1 replacement using factory bracket and connector (match connector type/length to your original).
Restores reliable run-out detection and reduces failed prints due to empty spools.
Installation tip: power off; mount in the intake path, route cable clear of moving parts, and run a filament run-out test after installation.
14,64€
Esaurito
Sensore filamento destro per CreatBot F160/F430. Sostituisce un’unità difettosa per ripristinare un rilevamento affidabile dell’esaurimento e una pausa/ripresa sicura. Per F430, questo si adatta aGiustopercorso dell’estrusore: abbina la lunghezza del connettore e del cavo all’originale.
CreatBot F160 / F430 Right Filament Sensor
Based on 0 reviews
Be the first to review “CreatBot F160 / F430 Right Filament Sensor”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Snow White
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233620 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFELT – 1.75mm – 0.25 kg
LAY-FELT is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FELT contains felt like features and is part of the PORO-LAY series of filaments. This material is highly porous. LAY-FELT is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
All objects are hot-sealable after drying
you may print without heated bed
the objects have near zero warp (deformation while printing)
Design rules: print less walls/shells and less filling % to shorten rinsing timeSKU: n/a
There are no reviews yet.