CreatBot F430 PCB Board
2 disponibili
Replacement control PCB (mainboard) for the CreatBot F430. This central controller coordinates X/Y/Z motion and manages the dual-extruder heaters, temperature sensing, fans, endstops, touchscreen, and other I/O.
Key Features
Compatibility: CreatBot F430 (mainboard/control PCB).
Function: Drives stepper motors and controls heater outputs, thermistor/temperature inputs, fans, and peripherals; communicates with the display/touch interface.
Direct 1:1 replacement using factory connectors and mounting standoffs.
Restores reliable homing, temperature control, and stable toolhead communication.
Pre-terminated sockets for solder-free service; board revision may differ but matches original interfaces.
Installation tip: power off and observe ESD care; label cables, verify firmware/revision match, then re-home axes and test heat/fans.
46,51€
2 disponibili
Scheda principale specifica del modello per CreatBot F430. Sostituisce un PCB difettoso e ripristina il controllo del movimento, il riscaldamento e l’interfaccia utente. Installa senza alimentazione, verifica la compatibilità del firmware ed esegui test termici e di homing.
CreatBot F430 PCB Board
Based on 0 reviews
Be the first to review “CreatBot F430 PCB Board”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Fire Red
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233651 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFOMM 40, 3.00 mm, 0.25 kg
LAY-FOMM 40 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 40 is a foamy material and is highly porous. LAY-FOMM 40 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
Polymer components of LAY-FOMM 40 are harmless and foodsafe.
All objects are hot-sealable after dryingSKU: 0634654248381 -
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Snow White
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233620
There are no reviews yet.