CreatBot Heat break with PTFE tube F160
13 disponibili
34,82€
13 disponibili
Adatto a CreatBot F160. Con questo montato è possibile stampare con temperature fino a 260 gradi.
CreatBot Heat break with PTFE tube F160
Based on 0 reviews
Be the first to review “CreatBot Heat break with PTFE tube F160”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Snow White
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233620 -
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Midnight Black
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0634041005009 -
3D World, Filamenti & Resine 3D
Taulman t-glase PETT – 2.85mm – 450g – Black
Taulman3D has now released its low temperature, high strength industrial t-glase filament line into the desktop 3D printing community. T-glase, which is short for tough glass, is a specially engineered high strength industrial 3D printer filament for users that print with PLA or lower temperature desktop 3D Printers.
Features
Taulman t-glase is Manufactured in the U.S.A.
Very High Strength
Optimum printing temperature is about 235°C to 240°C, but will print down to 230°C and up to about 248°CSKU: 0634654248220 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFOMM 60, 1.75mm, 0.25 kg
LAY-FOMM 60 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 60 is a foamy material and is highly porous. LAY-FOMM 60 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. LAY-FOMM 60 is slightly firmer than LAY-FOMM 40.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
All objects are hot-sealable after drying
the objects have near zero warp (deformation while printing)SKU: 0634654248398
There are no reviews yet.