eSun ePC
Esaurito
eSUN ePC (polycarbonate) is a durable 3D printing filament with excellent mechanical properties and high impact resistance and toughness. It is also temperature resistant with a heat resistance of up to 80 °C.
Highlights
High toughness
High impact resistance
Heat resistance
32,77€
Esaurito
eSun ePC
eSUN ePC (policarbonato) è un filamento per stampa 3D durevole con eccellenti proprietà meccaniche ed elevata resistenza agli urti e tenacità. Inoltre è resistente alla temperatura con una resistenza al calore fino a 80 °C.
Applicazione
- Meccanico
- Auto
- Elettronico ed elettrico
- Indossare
Nota:
- È meglio asciugare il filamento ePC prima della stampa (70℃/>6H). Si consiglia di utilizzare eBOX quando si stampa il filamento ePC.
- Lo shingkage del materiale ePC è elevato. Quindi si prega di utilizzare una stampante dotata di camera per stampare il filamento ePC.
eSun ePC
Based on 0 reviews
Be the first to review “eSun ePC”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Snow White
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233620 -
3D World, Filamenti & Resine 3D
Taulman t-glase PETT – 2.85mm – 450g – Black
Taulman3D has now released its low temperature, high strength industrial t-glase filament line into the desktop 3D printing community. T-glase, which is short for tough glass, is a specially engineered high strength industrial 3D printer filament for users that print with PLA or lower temperature desktop 3D Printers.
Features
Taulman t-glase is Manufactured in the U.S.A.
Very High Strength
Optimum printing temperature is about 235°C to 240°C, but will print down to 230°C and up to about 248°CSKU: 0634654248220 -
3D World, Filamenti & Resine 3D
POROLAY – LAYFOMM 40 – 1.75mm – 0.25 kg
LAY-FOMM 40 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 40 is a foamy material and is highly porous. LAY-FOMM 40 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
Polymer components of LAY-FOMM 40 are harmless and foodsafe.
All objects are hot-sealable after dryingSKU: 0634654248374
There are no reviews yet.