FlowTech™ CHT High Flow – CM2™ Nozzle
30 disponibili
Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2™ nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special WS2 nonstick nano coating.
44,33€
Microswiss e Bondtech hanno collaborato per portare l’ugello High Flow, Hardened Tip CM2™ nell’ecosistema FlowTech. Questo nuovo ugello incorpora la tecnologia proprietaria CHT, appositamente progettata per migliorare la portata del filamento. Il nucleo dell’ugello è realizzato in rame-cromo-zirconio ad alta temperatura e placcato con nichelatura chimica. Questa lega speciale mantiene la sua resistenza a temperature molto più elevate rispetto a una normale lega di rame. La punta dell’ugello è realizzata in acciaio ad alta velocità temprato M2 e rivestita con uno speciale rivestimento nano antiaderente WS2.
Caratteristiche dell’ugello CHT – CM2™:
Corpo in Rame Cromo Zirconio
- Placcato con nichelatura chimica
Inserto in acciaio rapido temprato M2
- Placcato con nichelatura chimica
- Rivestito con rivestimento antiaderente nano WS2
- Coefficiente di attrito: 0,035
- Durezza trattata termicamente: 68 HRC
Tecnologia CHT ad alto flusso
- L’ugello FlowTech, dotato di tecnologia Bondtech CHT, può raggiungere una portata volumetrica massima fino a 50 mm³/sec
- Una deposizione dello strato più uniforme si ottiene suddividendo il flusso del filamento in più camere mentre passa attraverso la zona di fusione. Ciò riduce gli spazi vuoti e i punti deboli tra gli strati
- Dimensioni dell’orifizio disponibili: 0,4 mm, 0,6 mm, 0,8 mm, 1,0 mm
Prodotto in Svezia da Bondtech
Assemblato negli Stati Uniti da Microswiss
FlowTech™ CHT High Flow – CM2™ Nozzle
Based on 0 reviews
Be the first to review “FlowTech™ CHT High Flow – CM2™ Nozzle”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFOMM 60, 1.75mm, 0.25 kg
LAY-FOMM 60 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 60 is a foamy material and is highly porous. LAY-FOMM 60 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. LAY-FOMM 60 is slightly firmer than LAY-FOMM 40.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
All objects are hot-sealable after drying
the objects have near zero warp (deformation while printing)SKU: 0634654248398 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFELT – 1.75mm – 0.25 kg
LAY-FELT is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FELT contains felt like features and is part of the PORO-LAY series of filaments. This material is highly porous. LAY-FELT is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
All objects are hot-sealable after drying
you may print without heated bed
the objects have near zero warp (deformation while printing)
Design rules: print less walls/shells and less filling % to shorten rinsing timeSKU: n/a
FlowTech™ CHT High Flow – CM2™ Nozzle
30 disponibili
Microswiss and Bondtech have partnered to bring the High Flow, Hardened Tip CM2™ nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special WS2 nonstick nano coating.
44,33€
Microswiss e Bondtech hanno collaborato per portare l’ugello High Flow, Hardened Tip CM2™ nell’ecosistema FlowTech. Questo nuovo ugello incorpora la tecnologia proprietaria CHT, appositamente progettata per migliorare la portata del filamento. Il nucleo dell’ugello è realizzato in rame-cromo-zirconio ad alta temperatura e placcato con nichelatura chimica. Questa lega speciale mantiene la sua resistenza a temperature molto più elevate rispetto a una normale lega di rame. La punta dell’ugello è realizzata in acciaio ad alta velocità temprato M2 e rivestita con uno speciale rivestimento nano antiaderente WS2.
Caratteristiche dell’ugello CHT – CM2™:
Corpo in Rame Cromo Zirconio
- Placcato con nichelatura chimica
Inserto in acciaio rapido temprato M2
- Placcato con nichelatura chimica
- Rivestito con rivestimento antiaderente nano WS2
- Coefficiente di attrito: 0,035
- Durezza trattata termicamente: 68 HRC
Tecnologia CHT ad alto flusso
- L’ugello FlowTech, dotato di tecnologia Bondtech CHT, può raggiungere una portata volumetrica massima fino a 50 mm³/sec
- Una deposizione dello strato più uniforme si ottiene suddividendo il flusso del filamento in più camere mentre passa attraverso la zona di fusione. Ciò riduce gli spazi vuoti e i punti deboli tra gli strati
- Dimensioni dell’orifizio disponibili: 0,4 mm, 0,6 mm, 0,8 mm, 1,0 mm
Prodotto in Svezia da Bondtech
Assemblato negli Stati Uniti da Microswiss
FlowTech™ CHT High Flow – CM2™ Nozzle
Based on 0 reviews
Be the first to review “FlowTech™ CHT High Flow – CM2™ Nozzle”
You must be logged in to post a review.
There are no reviews yet.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Sapphire Blue
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233644 -
3D World, Filamenti & Resine 3D
PORO-LAY – GELLAY – 3.00mm – 0.25 kg
Gellay filament from the Porolay series is a very special material. With it, soft parts can be created and you can finally print out your organs from the 3D printer – of course not functional. But for e.g. aquaristics from the 3D printer, this gel-like printing material is very exciting. Like all other Porolay filaments, Gellay is also hard in its initial state and easy to print.
Main features
When wet: gel-like and very soft
In dry state: Stable, not elastic but bendable
Perfect for soft tissues
Low warpingSKU: 0634654248428 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFELT – 1.75mm – 0.25 kg
LAY-FELT is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FELT contains felt like features and is part of the PORO-LAY series of filaments. This material is highly porous. LAY-FELT is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
All objects are hot-sealable after drying
you may print without heated bed
the objects have near zero warp (deformation while printing)
Design rules: print less walls/shells and less filling % to shorten rinsing timeSKU: n/a -
3D World, Filamenti & Resine 3D
LayWoo-d3 Filament – 2.85mm – 0,25kg
Tired of 3D Printing with plastic that smells like…plastic? Introducing the first 3D Printing Wood Based Material! This wood filament can be used like any other 3D Printing filament; just load it into your 3D Printer and print any objects you want!
Main features
40% recycled wood
No warping
Smells like wood
FlexibleSKU: 0634041230074
There are no reviews yet.