Kexcelled THE K11™ PEEK GF10
Esaurito
Kexcelled THE K11™ PEEK GF10 is an industrial fiberglass-reinforced PEEK filament. It is developed for 3D printing where extreme mechanical strength, heat resistance, and dimensional stability are required. The material is designed for technical components exposed to high temperatures, heavy loads, and chemically demanding environments.
Highlights:
Contains 10% fiberglass for increased rigidity and mechanical strength.
High Heat Resistance: Withstands up to 202 °C (HDT) under load without losing shape.
Chemical & Flame Resistance: Naturally resistant to chemicals and resists fire well.
Extremely rigid material with a tensile modulus of 7000–7500 MPa, ensuring minimal deformation.
High Quality: Consistent diameter and roundness for reliable extrusion.
530,70€
Perché scegliere Kexcelled PEEK GF10?
Il vantaggio principale del PEEK GF10 è che il rinforzo in fibra di vetro aumenta significativamente la rigidità rispetto al PEEK puro. Presenta una resistenza alla trazione di 80–85 MPa, che gli consente di resistere a sollecitazioni meccaniche estremamente elevate. Ciò rende il filamento adatto per ambienti industriali in cui la plastica standard si deforma o si degrada a causa di forze strutturali, calore o sostanze chimiche. Viene utilizzato per prototipi funzionali, parti per uso finale, nonché strumenti, maschere e dispositivi robusti.
Grazie all’elevata densità del materiale (1,28 g/cm³), le parti stampate raggiungono una struttura molto densa e solida, essenziale per i componenti che devono rimanere impermeabili a liquidi o gas sotto pressione.
Guida alla stampa e requisiti tecnici
Poiché PEEK GF10 richiede calore estremo, funziona solo con stampanti 3D professionali costruite per materiali ad alta temperatura. Per una corretta adesione degli strati e per evitare deformazioni è necessaria una camera di costruzione chiusa e riscaldata.
- Temperatura ugello: 400–450 °C
- Temperatura del letto: 110–220 °C (si consiglia colla per alte temperature)
- Temperatura della camera: 80–220 °C
- Velocità di stampa: 30–60 mm/s
- Ventola di raffreddamento: spenta
Compatibilità
Adatto per l’uso, tra gli altri:
- Industrie aerospaziali e automobilistiche
- Componenti tecnici e industriali
- Maschere, dispositivi e attrezzature
- Prototipi funzionali e prodotti finali
- Applicazioni con requisiti di temperatura estremi
- Ambienti chimicamente impegnativi
Kexcelled THE K11™ PEEK GF10
Based on 0 reviews
Be the first to review “Kexcelled THE K11™ PEEK GF10”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Midnight Black
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0634041005009 -
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Fire Red
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233651 -
3D World, 3D-Stampanti e altro
Simplify3D® Software
The Simplify3D slicer software suite contains everything you need to begin making parts on your new 3D printer. Import your digital models/CAD data, select your pre-configured settings and generate your advanced G-Code instructions in seconds.
Main features:
Intelligent and easy to use slicer software for your 3D printer
Settings for most common 3D printers & materials integrated
Vary layer height, speed, temperature and much more within a 3D printing process
Innovative support structure – Additive Manufacture with soluble support-filamentSKU: n/a
Kexcelled THE K11™ PEEK GF10
Esaurito
Kexcelled THE K11™ PEEK GF10 is an industrial fiberglass-reinforced PEEK filament. It is developed for 3D printing where extreme mechanical strength, heat resistance, and dimensional stability are required. The material is designed for technical components exposed to high temperatures, heavy loads, and chemically demanding environments.
Highlights:
Contains 10% fiberglass for increased rigidity and mechanical strength.
High Heat Resistance: Withstands up to 202 °C (HDT) under load without losing shape.
Chemical & Flame Resistance: Naturally resistant to chemicals and resists fire well.
Extremely rigid material with a tensile modulus of 7000–7500 MPa, ensuring minimal deformation.
High Quality: Consistent diameter and roundness for reliable extrusion.
530,70€
Perché scegliere Kexcelled PEEK GF10?
Il vantaggio principale del PEEK GF10 è che il rinforzo in fibra di vetro aumenta significativamente la rigidità rispetto al PEEK puro. Presenta una resistenza alla trazione di 80–85 MPa, che gli consente di resistere a sollecitazioni meccaniche estremamente elevate. Ciò rende il filamento adatto per ambienti industriali in cui la plastica standard si deforma o si degrada a causa di forze strutturali, calore o sostanze chimiche. Viene utilizzato per prototipi funzionali, parti per uso finale, nonché strumenti, maschere e dispositivi robusti.
Grazie all’elevata densità del materiale (1,28 g/cm³), le parti stampate raggiungono una struttura molto densa e solida, essenziale per i componenti che devono rimanere impermeabili a liquidi o gas sotto pressione.
Guida alla stampa e requisiti tecnici
Poiché PEEK GF10 richiede calore estremo, funziona solo con stampanti 3D professionali costruite per materiali ad alta temperatura. Per una corretta adesione degli strati e per evitare deformazioni è necessaria una camera di costruzione chiusa e riscaldata.
- Temperatura ugello: 400–450 °C
- Temperatura del letto: 110–220 °C (si consiglia colla per alte temperature)
- Temperatura della camera: 80–220 °C
- Velocità di stampa: 30–60 mm/s
- Ventola di raffreddamento: spenta
Compatibilità
Adatto per l’uso, tra gli altri:
- Industrie aerospaziali e automobilistiche
- Componenti tecnici e industriali
- Maschere, dispositivi e attrezzature
- Prototipi funzionali e prodotti finali
- Applicazioni con requisiti di temperatura estremi
- Ambienti chimicamente impegnativi
Kexcelled THE K11™ PEEK GF10
Based on 0 reviews
Be the first to review “Kexcelled THE K11™ PEEK GF10”
You must be logged in to post a review.
There are no reviews yet.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Sapphire Blue
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233644 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFOMM 60, 1.75mm, 0.25 kg
LAY-FOMM 60 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 60 is a foamy material and is highly porous. LAY-FOMM 60 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. LAY-FOMM 60 is slightly firmer than LAY-FOMM 40.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
All objects are hot-sealable after drying
the objects have near zero warp (deformation while printing)SKU: 0634654248398 -
3D World, Filamenti & Resine 3D
LayWoo-d3 Filament – 1.75 mm – 0,25kg
Tired of 3D Printing with plastic that smells like…plastic? Introducing the first 3D Printing Wood Based Material! This wood filament can be used like any other 3D Printing filament; just load it into your 3D Printer and print any objects you want!
Main features
40% recycled wood
No warping
Smells like wood
FlexibleSKU: 5357953105487 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFELT – 1.75mm – 0.25 kg
LAY-FELT is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FELT contains felt like features and is part of the PORO-LAY series of filaments. This material is highly porous. LAY-FELT is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
All objects are hot-sealable after drying
you may print without heated bed
the objects have near zero warp (deformation while printing)
Design rules: print less walls/shells and less filling % to shorten rinsing timeSKU: n/a
There are no reviews yet.