Kexcelled THE K7™ PET CF10
Esaurito
Kexcelled THE K7™ PET CF10 is a high-performance, carbon fiber-reinforced PET (polyethylene terephthalate) filament developed for industrial 3D printing where high dimensional stability, heat resistance, and precision are required. The material is optimized for high-speed printing and engineered to prevent deformations under load.
Highlights
Carbon fiber-reinforced PET filament developed for industrial 3D printing
Optimized for high-speed printing while maintaining precision
High heat resistance – dimensionally stable up to 102 °C under load
Very high mechanical rigidity and resistance to deformation
High dimensional stability and strong layer adhesion
Consistent diameter and roundness for a stable and reliable material feed
42,41€
Esaurito
Perché scegliere K7™ PET CF10?
Kexcelled THE K7™ PET CF10 è sviluppato per stampe dove sono richieste un’elevata stabilità dimensionale e una buona resistenza al calore per contrastare la deformazione e la deformazione sotto carico. Il rinforzo in fibra di carbonio fornisce al materiale prestazioni meccaniche molto elevate, mostrando una resistenza alla trazione di 65–75 MPa e un modulo di trazione di 4000–6000 MPa in condizioni asciutte.
Con una densità di 1,32 g/cm³, il filamento fornisce stampe dense e uniformi con elevata precisione e proprietà meccaniche stabili. Ciò rende il materiale particolarmente adatto per parti funzionali, strutture leggere e componenti industriali che richiedono precisione dimensionale e stabilità strutturale a lungo termine.
Consigli per la stampa
- Temperatura ugello: 270–300 °C
- Temperatura del letto: 70–100 °C
- Modifica del letto: nessuna
- Velocità di stampa: 40–250 mm/s
- Ventola di raffreddamento: 0%
Applicazioni
- Componenti tecnici e industriali
- Strutture leggere con elevati requisiti di rigidità
- Prototipi funzionali e prodotti finali meccanici
- Maschere, dispositivi e utensili robusti
- Applicazioni esposte ad alte temperature e sollecitazioni meccaniche
Kexcelled THE K7™ PET CF10
Based on 0 reviews
Be the first to review “Kexcelled THE K7™ PET CF10”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Snow White
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233620 -
3D World, Filamenti & Resine 3D
Taulman t-glase PETT – 2.85mm – 450g – Black
Taulman3D has now released its low temperature, high strength industrial t-glase filament line into the desktop 3D printing community. T-glase, which is short for tough glass, is a specially engineered high strength industrial 3D printer filament for users that print with PLA or lower temperature desktop 3D Printers.
Features
Taulman t-glase is Manufactured in the U.S.A.
Very High Strength
Optimum printing temperature is about 235°C to 240°C, but will print down to 230°C and up to about 248°CSKU: 0634654248220 -
3D World, Filamenti & Resine 3D
PORO-LAY – GELLAY – 3.00mm – 0.25 kg
Gellay filament from the Porolay series is a very special material. With it, soft parts can be created and you can finally print out your organs from the 3D printer – of course not functional. But for e.g. aquaristics from the 3D printer, this gel-like printing material is very exciting. Like all other Porolay filaments, Gellay is also hard in its initial state and easy to print.
Main features
When wet: gel-like and very soft
In dry state: Stable, not elastic but bendable
Perfect for soft tissues
Low warpingSKU: 0634654248428
There are no reviews yet.