Kexcelled THE K8™ PA CF
Esaurito
Kexcelled THE K8™ PA CF is a high-performance, carbon fiber-reinforced polyamide 12 (nylon) filament developed for industrial 3D printing where very high strength and reliability are critical. The material is optimized for components exposed to high loads and long-term use in demanding environments.
Highlights
Carbon fiber-reinforced polyamide filament (PA12) for industrial 3D printing
High mechanical strength with a good balance of toughness and stiffness
Excellent heat resistance – dimensionally stable up to 178 °C under load
Very high tensile strength (55–65 MPa) in a dry state
Strong layer adhesion and stable material feed for reliable printing
Consistent diameter for stable and reliable printing
66,76€
Esaurito
Perché scegliere il K8™ PA CF?
Kexcelled THE K8™ PA CF è progettato per applicazioni in cui i componenti devono mantenere un’elevata resistenza e stabilità dimensionale anche sotto carico a lungo termine. Il rinforzo in fibra di carbonio fornisce al filamento un elevato modulo di trazione (4600–5000 MPa), risultando in parti estremamente stabili e durevoli.
Con una densità di 1,21 g/cm³, le stampe raggiungono una struttura densa e uniforme che contribuisce a una buona precisione dimensionale e a una forte adesione degli strati: ideale per parti funzionali, strutture leggere e componenti industriali che richiedono un’elevata stabilità dimensionale.
Consigli per la stampa
- Temperatura ugello: 270–300 °C
- Temperatura del letto: 70–100 °C
- Velocità di stampa: 40–80 mm/s
- Ventola di raffreddamento: 0%
Applicazioni
- Componenti tecnici e industriali
- Strutture leggere con elevati requisiti di rigidità
- Prototipi funzionali e prodotti finali meccanici
- Maschere, dispositivi e utensili robusti
- Applicazioni in ambienti con elevati requisiti di resistenza chimica e termica
Kexcelled THE K8™ PA CF
Based on 0 reviews
Be the first to review “Kexcelled THE K8™ PA CF”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
PORO-LAY – GELLAY – 1.75mm – 0.25 kg
Gellay filament from the Porolay series is a very special material. With it, soft parts can be created and you can finally print out your organs from the 3D printer – of course not functional. But for e.g. aquaristics from the 3D printer, this gel-like printing material is very exciting. Like all other Porolay filaments, Gellay is also hard in its initial state and easy to print.
Main features
When wet: gel-like and very soft
In dry state: Stable, not elastic but bendable
Perfect for soft tissues
Low warpingSKU: 0634654248411 -
3D World, Filamenti & Resine 3D
NinjaFlex Filament – 1.75mm – 0.5 kg – Sapphire Blue
Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic elastomer (TPE) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.
Features
Consistent diameter and material properties provide reliable, high quality prints
Patent pending technology allows for smooth feeding
High elasticity and excellent abrasion resistance
Excellent build platform adhesion and bonding between layersSKU: 0662345233644 -
3D World, Filamenti & Resine 3D
POROLAY – LAYFOMM 40 – 1.75mm – 0.25 kg
LAY-FOMM 40 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 40 is a foamy material and is highly porous. LAY-FOMM 40 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
Polymer components of LAY-FOMM 40 are harmless and foodsafe.
All objects are hot-sealable after dryingSKU: 0634654248374
There are no reviews yet.