Phaetus PS M6 Plated Copper Nozzle 0,6 mm – 1,75 mm – 1 pcs
15 disponibili
In the process of 3D printing, PEEK, PEKK, PEI, PSU, PPSU and other filaments who can be melted above 300℃ are called high-temperature filaments. The ordinary brass nozzle cannot complete its printing. The thermal conductivity of the nozzle made of copper alloy is 330W/m.k, and the maximum printing temperature can reach 500℃, which can solve the problem of rapid heating of high-temperature filaments and continuous printing, effectively extending the service life of the nozzle.
Features
Min. Orifice Diameter φ0.25
Tolerance ±0.01mm
Inner Hole Roughness ≤Ra0.4μm
Concentricity ≤0.02mm
Hardness 6 Mohs
Maximum printing Temperature 500°C
Thermal Conductivity 330W/m·k
Expansion Coefficient 16.7μm/m·℃
10,48€
15 disponibili
Ugello in rame placcato Phaetus PS M6
Vantaggio
Resistenza alla temperatura fino a 500 ℃, la scelta migliore per tecnopolimeri speciali come il PEEK.
Le elevate prestazioni termiche mantengono una temperatura uniforme della punta dell’ugello durante la stampa, garantendo così un’estrusione stabile. Nel frattempo, migliora ulteriormente la velocità di stampa senza sacrificare la qualità.
- La speciale tecnologia di lavorazione e post-trattamento rendono l’ugello senza bave sul bordo della punta e senza detriti nel foro.
- Rugosità del foro interno inferiore a Ra0.4 e l’intero ugello nichelato, maggiore levigatezza e minore adesione.
- La lega di rame di qualità superiore con elevata resistenza ed elevata conduttività termica garantisce la stabilità delle prestazioni.
Filamento applicabile
Funziona bene per applicazioni ad alta temperatura, stampa con materiali come PEEK, PEKK, PEI, PSU, PPSU ecc.
Phaetus PS M6 Plated Copper Nozzle 0,6 mm – 1,75 mm – 1 pcs
Based on 0 reviews
Be the first to review “Phaetus PS M6 Plated Copper Nozzle 0,6 mm – 1,75 mm – 1 pcs”
You must be logged in to post a review.
Prodotti correlati
-
3D World, Filamenti & Resine 3D
LayWoo-d3 Filament – 1.75 mm – 0,25kg
Tired of 3D Printing with plastic that smells like…plastic? Introducing the first 3D Printing Wood Based Material! This wood filament can be used like any other 3D Printing filament; just load it into your 3D Printer and print any objects you want!
Main features
40% recycled wood
No warping
Smells like wood
FlexibleSKU: 5357953105487 -
3D World, Filamenti & Resine 3D
PORO-LAY – LAYFOMM 60, 3.00 mm, 0.25 kg
LAY-FOMM 60 is the newest innovation from the creator of LAYBRICK, LAYWOO-D3, and BendLay. LAY-FOMM 60 is a foamy material and is highly porous. LAY-FOMM 60 is part rubber-elastomeric polymer and part PVA. Once you rinse this material in water only the rubber polymer remains as your micro-porous and flexible object. LAY-FOMM 60 is slightly firmer than LAY-FOMM 40.
Main features
After printing rinse with water to create an object that is micro-porous & elastic
Optimal for printing soft rubber objects
All objects are hot-sealable after drying
the objects have near zero warp (deformation while printing)SKU: 0634654248404 -
3D World, 3D-Stampanti e altro
Simplify3D® Software
The Simplify3D slicer software suite contains everything you need to begin making parts on your new 3D printer. Import your digital models/CAD data, select your pre-configured settings and generate your advanced G-Code instructions in seconds.
Main features:
Intelligent and easy to use slicer software for your 3D printer
Settings for most common 3D printers & materials integrated
Vary layer height, speed, temperature and much more within a 3D printing process
Innovative support structure – Additive Manufacture with soluble support-filamentSKU: n/a
There are no reviews yet.