3D World
Visualizzazione di 5377-5418 di 5560 risultatiPopolarità
-
-
3D World, Filamenti & Resine 3D
LayFilaments LAYWOODmeta5 Filament – 2.85mm – 250 g
Kai Parthy, developer of interesting, sometimes very sophisticated materials for 3D printing, presents LAYWOODmeta5, a new version of his wood filament that is thermally insulating and adapts to climate changes by changing length and volume.
Main features
floats on water, light as Balsa after rinsing in water, can swim, candive, sucks water fast
thermal isolating, low thermal conductivity
climate responsive (elongation)
absorptive carrier for agentsSKU: 0634654249715 -
3D World, Filamenti & Resine 3D
LayFilaments LAYWOODmeta5 Filament – 1.75mm – 250 g
Kai Parthy, developer of interesting, sometimes very sophisticated materials for 3D printing, presents LAYWOODmeta5, a new version of his wood filament that is thermally insulating and adapts to climate changes by changing length and volume.
Main features
floats on water, light as Balsa after rinsing in water, can swim, candive, sucks water fast
thermal isolating, low thermal conductivity
climate responsive (elongation)
absorptive carrier for agentsSKU: 0634654249708 -
3D World, Pezzi di ricambio e accessori
BondTech Raise3D DualDirect upgrade
Bondtech upgrade extruder for RAISE3D DualDirect with dual nozzles. This kit provides a high-performance material feeding system with the ability to print faster with improved quality. The adjustable thumbscrew allows you to fine-tune the force acting on the filament. The housing parts are professionally SLS printed in polyamide for maximum strength and precision. Please Note! On early printers an adapter cable is needed in order to connect the factory cable to the new motor. You can determine if your printer has legacy motors with an easy visual check. Motors that require an adapter will have a silver appearance (unpainted aluminum finish) on the front and rear side of the motor. If the motors on your printer have a black front and rear motor endplate then you will not need this adapter.
SKU: 7350011412143 -
-
-
-
-
3D World, Pezzi di ricambio e accessori
Wanhao D7 Stop switch
The Wanhao D7 Stop Switch is an original replacement part for the Duplicator 7 resin 3D printer. It functions as the Z-axis end-stop, detecting the home position to ensure accurate calibration and consistent printing results.
Key Features
OEM stop switch for Wanhao D7
Serves as Z-axis end-stop sensor
Ensures accurate homing and calibration
Supports consistent and reliable printing
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Wanhao D7 LCD PCB
The Wanhao D7 LCD PCB is an original replacement part for the Duplicator 7 resin 3D printer. It powers and controls the LCD screen, ensuring accurate light exposure and stable performance during printing.
Key Features
OEM LCD PCB for Wanhao D7
Controls and powers the LCD display
Ensures accurate resin layer curing
Supports stable printing performance
Easy to install as a replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot 2,85 mm Feeder motor, block and gear 2/R
The CreatBot 2.85 mm Feeder Motor, Block and Gear 2/R is a spare assembly for the filament feed system on CreatBot printers. It combines the stepper motor, feeder block, and drive gear for 2.85 mm filament, supplied in the 2/R variant used in dual-feed setups.
Key Features
Spare feeder assembly for CreatBot printers
For 2.85 mm filament systems
Includes stepper motor, feeder block, and drive gear
2/R variant for the R-designated feeder position
Restores stable filament traction and feed
Direct replacement to minimize downtimeSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot 2,85 mm Feeder motor, block and gear 1/L
The CreatBot 2.85 mm Feeder Motor, Block and Gear 1/L is an original replacement unit designed for CreatBot 3D printers using 2.85 mm filament. This assembly includes the feeder motor, block, and gear for the left extruder, ensuring stable and precise filament feeding.
Key Features
OEM feeder motor, block, and gear for CreatBot 2.85 mm filament
Designed for the left extruder (1/L)
Provides stable and accurate filament feeding
Ensures consistent extrusion performance
Durable and easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
BuildTak 3D Print Surface – Ø 304 mm (Ø 12″”)
BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds.
SKU: 0634654248763 -
3D World, Pezzi di ricambio e accessori
BuildTak 3D Print Surface – 203 x 203 mm (8″ x 8″)
BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds.
SKU: 0634654249197 -
3D World, Pezzi di ricambio e accessori
BuildTak 3D Print Surface – Ø 203 mm (Ø 8´´)
BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds.
SKU: 0634654249203 -
3D World, Pezzi di ricambio e accessori
BuildTak 3D Print Surface – 292 x 165 mm (11.5″ x6,5″)
BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds.
SKU: 0634654248725 -
3D World, Pezzi di ricambio e accessori
BuildTak 3D Print Surface – 254 x 165 (10″ x 6,5″)
BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds.
SKU: n/a -
3D World, Pezzi di ricambio e accessori
BuildTak 3D Print Surface – Ø 165 mm (Ø 6,5″”)
BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds.
SKU: 0634654248701 -
3D World, Pezzi di ricambio e accessori
P120 Tracheal Joint V1
The Primacreator P120 Tracheal Joint V1 is a replacement Bowden connector for the P120. It secures the PTFE tube for a steady filament path and smooth printing.
Key Features
Direct fit for Primacreator P120
Quick push-fit connection for PTFE Bowden tube
Stable filament path for consistent extrusion
Durable build for long service life
Easy, tool-light installation
Pack includes 1 pieceSKU: n/a -
