3D World
Visualizzazione di 3697-3738 di 5572 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
E3D V6 Nozzle X 0,6 mm – 1,75 mm – 1 pcs
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
SKU: 5060567866629 -
3D World, Pezzi di ricambio e accessori
E3D V6 Nozzle X 0,5 mm – 1,75 mm – 1 pcs
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
SKU: 5060567863093 -
3D World, Pezzi di ricambio e accessori
E3D V6 Nozzle X 0,4 mm – 1,75 mm – 1 pcs
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
SKU: 5060567866636 -
3D World, Pezzi di ricambio e accessori
E3D V6 Gold Edition HotEnd – 1,75mm – 12V
All the best V6 parts carefully curated to make the V6 Gold. More than just its shiny appearance, this HotEnd is built for outstanding performance with all filaments and optimised for high-temperature and abrasive 3D printing.
‘Gold’ Heat SinkKey features
‘Gold’ anodised Heatsink
Maximum printing temperature: 285ºC
Plated copper heater block
Hardened steel nozzle
High precision heater cartridge
Groove mount
Capricorn TubingSKU: 5060567860269 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender 3 S1 Heating Tube
The Creality 3D Ender-3 S1 Heating Tube is a genuine hotend heater cartridge designed to reliably heat the heating block of the Ender-3 S1 and S1 Pro. Operating at 24 V and 50 W (40 W variant also available), it features a compact 6 × 20 mm ceramic-core element with an approximate 40–43 mm cable terminated with a 2-pin JST XH 2.54 connector. This ensures efficient, precise heating for consistent filament melting and print quality.
Key Features
Original Creality heater cartridge for Ender-3 S1 / S1 Pro
24 V operation at 50 W (40 W option available)
Ceramic-core element for stable and reliable heating
Compact dimensions: 6 × 20 mm, approx. 40–43 mm cable
Standard 2-pin JST XH 2.54 connector for easy swap-in
Ensures precise, consistent hotend temperaturesSKU: 3103010078 -
3D World, Pezzi di ricambio e accessori
Creality 3D Heating Tube_24V_50W_D6×20_L50_XH2.54-2P
The Creality 24V 50W Heating Tube (D6×20, L50, XH2.54-2P) is a genuine replacement heating element for Creality 3D printers. It delivers fast and stable heating performance, ensuring consistent extrusion and reliable print quality across different materials.
Key Features
OEM heating tube for Creality 3D printers
Power: 50W, Voltage: 24V
Dimensions: Diameter 6 × 20 mm, Length 50 mm
XH2.54-2P connector for easy installation
Provides fast and stable heating
Ensures consistent extrusion with various filamentsSKU: 3103010079 -
3D World, Pezzi di ricambio e accessori
Creality 3D Thermistor NTC-0.55K_D3×5.5_L35_XH1.25-2P
The Creality 3D Thermistor NTC-0.55K_D3×5.5_L35_XH1.25-2P is an NTC temperature sensor for Creality printers, used to measure hotend or heated-bed temperature. It features a compact ø3×5.5 mm sensing head, 35 mm probe length, and a 2-pin XH 1.25 mm connector for direct compatibility.
Key Features
NTC thermistor for Creality 3D printers
Sensing head size: D3×5.5 mm
Probe length: L35
2-pin XH1.25 connector for plug-and-play wiring
Suitable for hotend or heated bed temperature feedback
Genuine-spec replacement part for stable temperature controlSKU: 3103020114 -
3D World, Pezzi di ricambio e accessori
Bondtech Raise3D Pro2 Hotend Fix Set
Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We have the fix.
The Raise3D Pro2 can actually be a very good 3D printer if you use this.Main benefits:
Heat creep is minimized by Copperhead’s thermal performance
Better layer bonding from the Bondtech CHT nozzles
and higher flow with PLA and other non-abrasive materials
Compatible with all RepRap nozzles
Easy and quick to install
Includes a gauging tool to achieve optimal hotend setupSKU: 7350011414642 -
3D World, Pezzi di ricambio e accessori
Snapmaker Rotary Module A350 / Artisan / Ray
The Snapmaker 2.0 Rotary Module is a precision-engineered accessory that transforms your Snapmaker 2.0 into a powerful 4-axis desktop CNC and laser engraving machine. Designed for creators seeking to expand their capabilities, this module enables intricate rotary carving and engraving on cylindrical and irregular surfaces with exceptional detail and accuracy.
Key Features
Adds 4th-axis functionality for CNC carving and laser engraving
Utilizes strain wave gearing with a 1001 speed reducer for ultra-fine machining
Achieves a minimum rotation angle of 0.1 degrees for precise detailing
Supports a wide range of materials, including wood, plastic, leather, and more
Compatible with Snapmaker 2.0 A250T/A250, A350T/A350, Artisan, and Ray models
Integrates seamlessly with Snapmaker Luban software for intuitive controlSKU: 6971573441122 -
3D World, Pezzi di ricambio e accessori
Bondtech CHT Vol Coated Brass Nozzles – 5-Pack
Includes the following sizes : 0.4, 0.6, 0.8, 1.0, and 1.2mm
These are nozzles for High Flow applications
They are manufactured by Bondtech in-house, and will fit the following blocks/printers:
E3D Volcano blocks
Other Volcano type blocks
Anycubic Kobra and Kobra Max
Anycubic Vyper
Artillery Genius Pro
Artillery Sidewinder X1 and X2
FLSUN Super Racer
Lulzbot TAZ MOARstruder
Other…Features
1 unit per pack
Available sizes : 0.40, 0.60, 0.80, 1.0, and 1.2mm
Optimized for 1.75mm filament
Compatible with 2.85mm filament
Requires 6mm wrenchSKU: 7350011415083 -
-
-
3D World, Pezzi di ricambio e accessori
CreatBot PEEK300 Flat cable from extruder to motherboard
The CreatBot PEEK300 Flat Cable connects the extruder to the motherboard in CreatBot PEEK-300 3D printers. It transmits both signals (temperature readings, motor control data, sensors) and power, while remaining flexible and durable to withstand continuous motion during printing.
Key Features
Designed for signal and power transmission between extruder and motherboard
Flexible yet durable to endure repeated motion
Essential component for stable and reliable high-temperature printingSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot 42HS63 motor for X, Y, Z
The CreatBot 42HS63 stepper motor is a genuine replacement part for the X, Y, and Z axes of CreatBot 3D printers. It ensures precise motion control, stable performance, and long-lasting reliability for professional-grade printing.
Key Features
Original stepper motor for CreatBot printers
Compatible with X, Y, and Z axis motion
Model: 42HS63
Provides accurate and stable movement
Durable construction for long service life
Essential spare part for consistent performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Peek 300 Air pump for DAS
Air pump designed for the Direct Annealing System (DAS) of the CreatBot PEEK-300 3D printer. Original CreatBot spare part that provides external cold air to cool the heated chamber efficiently.
Key Features
Original CreatBot spare part
Specifically for the PEEK-300 with DAS
Delivers cold air from outside to the hot chamber
Enhances chamber temperature control and print qualitySKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Power Check PCB
The CreatBot Power Check PCB is the original replacement circuit board designed to restore or maintain the power monitoring function in CreatBot 3D printers. It ensures correct detection of power status and supports safe and reliable printing operation.
Key Features
Genuine CreatBot replacement PCB
Controls and monitors printer power status
Compatible with: F160, F430, D600, D600 Pro, PEEK-300, F1000, DX/DX Plus, DE/DE Plus
Ensures reliable power detection during printing
Factory-tested original spare part
Important for maintaining stable operationSKU: n/a -
3D World, Pezzi di ricambio e accessori
xTool 3 mm Red Glitter Acrylic Sheets (2-Pack)
The xTool 3 mm Red Glitter Acrylic Sheets (2-Pack) offer a vibrant and durable solution for laser cutting and engraving projects. Measuring 300 x 300 mm (12″ x 12″) with a thickness of 3 mm (1/8″), these opaque, glossy sheets are compatible with both diode and CO₂ laser machines. The red glitter finish adds a sparkling touch, making them ideal for a variety of creative applications.
Key Features
Pack includes two 300 x 300 mm (12″ x 12″) sheets, 3 mm (1/8″) thick
Red glitter opaque glossy acrylic enhances visual appeal
Compatible with diode and CO₂ laser machines
Easy to shape and process for various projects
Protective film on both sides to prevent scratches
Ideal for signs, decorations, and artistic creationsSKU: 0193122008174 -
3D World, Pezzi di ricambio e accessori
xTool 3 mm Black Acrylic Sheets (3-Pack)
The xTool 3 mm Black Acrylic Sheets (3-pack) are high-quality cast acrylic panels, perfect for laser cutting and engraving. Each sheet measures 300 × 300 × 3 mm, with consistent thickness and a smooth glossy surface. Great for projects where you want clean cuts, sharp engravings and strong contrast.
Key Features
Sheet size: 300 × 300 × 3 mm
Solid black color with glossy finish
Cast acrylic for cleaner edges and precise engraving
Easy to cut, shape and work with
Pack includes 3 sheets – practical and cost-effective
Compatible with all xTool laser machinesSKU: 6928819517998 -
3D World, Pezzi di ricambio e accessori
xTool Filter Replacement Kit for xTool Smoke Purifier
The xTool Filter Replacement Kit for Smoke Purifier is a complete set of filters that keeps your air purification effective. Regular replacement ensures a cleaner and safer workspace when laser cutting and engraving.
Key Features
Complete kit: 2 pre-filters, 1 medium filter, 1 main filter
Pre-filters capture dust and larger particles
Medium filter traps fine particles down to 0.3 µm
Main activated carbon filter removes gases and odors
Easy to install and replaceSKU: 6928819513846 -
3D World, Pezzi di ricambio e accessori
CreatBot PEEK 300 Water Pump
The CreatBot PEEK-300 Water Pump is an original spare part designed to ensure efficient coolant circulation in the printer’s water cooling system. It helps maintain stable operating temperatures during high-performance printing with advanced polymers.
Key Features
Reliable water pump for the CreatBot PEEK-300
Ensures efficient circulation of cooling liquid
Supports stable high-temperature printing conditions
Compact, quiet, and energy-efficient design
Easy to install and maintain
Essential replacement part for consistent printer performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot PEEK 300 Mainboard
The CreatBot PEEK-300 Mainboard is the original replacement motherboard designed for reliable operation of the PEEK-300 3D printer. It ensures stable performance, precise control, and full compatibility with all factory-installed components.
Key Features
Genuine mainboard for CreatBot PEEK-300
Ensures stable and reliable printer performance
Full compatibility with original hardware and firmware
Provides accurate control of all printer functions
Durable and factory-tested component
Essential spare part for professional uptimeSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot PEEK 300 500°C Hotend
Enhance your CreatBot PEEK-300 3D printers capabilities with the high-temperature 500 degrees Celsius hotend. Engineered for industrial-grade performance, this hotend enables precise printing with advanced thermoplastics, ensuring consistent quality and durability for demanding applications.
Key Features
Supports printing up to 500 degrees Celsius for high-performance materials
Compatible with CreatBot PEEK-300 3D printer
Constructed from high-quality engineering-grade materials
Modular design allows for easy replacement and maintenance
Ideal for materials like PEEK, PEI (ULTEM), and other high-temperature filamentsSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot PEEK 300 260°C Hotend
The CreatBot PEEK 300 260°C Hotend is an original replacement hotend engineered for reliable printing up to 260°C. It delivers precise, consistent extrusion and stable performance with standard materials such as PLA, ABS, and PETG—helping maintain the quality and uptime of your CreatBot PEEK 300.
Key Features
Original hotend for CreatBot PEEK 300
Supports printing up to 260°C
Stable, consistent extrusion with PLA/ABS/PETG
Durable construction for long service life
Easy to install and maintainSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot PEEK 300 PCB aluminum plate
The CreatBot PEEK-300 PCB aluminum plate is a high-performance heated bed designed to ensure stable and even heat distribution during 3D printing. Made from durable aluminum and integrated with PCB heating technology, it provides reliable adhesion for engineering-grade materials like PEEK, PEKK, PEI, and other high-temperature polymers.
Key Features
Durable aluminum plate with PCB heating system
Fast and even heat distribution
Stable high-temperature performance for demanding materials
Ensures excellent print adhesion and reduced warping
Compatible with CreatBot PEEK-300
Essential replacement part for consistent printing qualitySKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot PEEK 300 Extruder Motor
The CreatBot PEEK 300 Extruder Motor is an original replacement stepper motor designed for the high-performance PEEK-300 3D printer. It drives the extruder mechanism, ensuring precise filament feeding required for printing high-temperature engineering materials.
Key Features
OEM extruder motor for CreatBot PEEK-300
Provides accurate filament drive
Built for high-temperature printing performance
Ensures reliable extrusion of engineering polymers
Durable design for continuous operation
Direct replacement for easy maintenanceSKU: n/a
