Shop
Visualizzazione di 925-966 di 5323 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Artillery Hornet Y-axis End-Stop Cable
Replacement Y-axis end-stop cable for the Artillery Hornet. Connects the Y end-stop switch to the control board to provide a reliable homing/limit signal for accurate positioning.
Key Features
Compatibility: Artillery Hornet (Y-axis end-stop circuit)
Links the Y end-stop switch to the mainboard for homing and limit detection
Pre-terminated connectors for quick, solder-free installation
Direct 1:1 replacement for damaged or intermittent cables
Designed to follow the printer’s original internal routing
Installation tip: power off the printer and verify Y home after replacementSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Y-axis Stepper Motor Cable
Replacement Y-axis stepper motor cable for the Artillery Hornet. Connects the control board’s stepper driver to the Y-axis stepper motor to provide reliable bed/carriage motion.
Key Features
Compatibility: Artillery Hornet (Y-axis stepper motor connection).
Function: Harness between the mainboard stepper driver and the Y-axis stepper motor.
Direct 1:1 replacement with factory-length, keyed connectors, and original routing.
Pre-terminated plugs for quick, solder-free installation.
Restores consistent Y driving when the original cable is worn, pinched, or intermittent.
Installation tip: power off; route as original, avoid sharp bends, secure with ties; re-home and verify Y travel.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Internal USB Connection Cable
Replacement internal USB connection cable for the Artillery Hornet 3D printer. It links the printer’s internal USB interface/port to the control board, ensuring stable data communication and reliable device recognition.
Key Features
Compatible with Artillery Hornet (internal USB link)
Connects the internal USB interface/port to the control board
Pre-terminated plug-and-play connectors, no soldering required
Direct 1:1 replacement for damaged, loose, or faulty cables
Designed to follow original internal routing for a neat installation
Installation note: power off the printer and observe ESD precautionsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Extruder Cover
Replacement extruder cover for the Artillery Hornet. This protective shroud encloses the toolhead area, helps manage wiring, and provides the mounting interface for the hotend heatsink/fans and ducts.
Key Features
Compatibility: Artillery Hornet (extruder/toolhead cover).
Function: Protects the hotend zone and organizes cable routing; supports fan/duct mounting.
Direct 1:1 replacement matching the factory mounting points and clearances.
Restores clean airflow around the heatsink and improves serviceability.
Designed to fit the original harness path; avoids wire chafing and snagging.
Installation tip: power off and cool the hotend; transfer fans/ducts from the old cover, avoid pinching wires, and verify fan operation.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Print Head Cover
The Artillery Hornet Print Head Cover is an original replacement part for the Hornet 3D printer. It protects and encloses the print head assembly, covering the hotend, fans, and wiring for safe and reliable operation.
Key Features
Print head cover for Artillery Hornet
Protects extruder components
Covers hotend, fans, and wiring
Ensures safe and organized assembly
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Extruder Arm
The Artillery Extruder Arm is an original replacement part for Artillery 3D printers such as the Sidewinder X1 and Genius. It holds the filament in place against the drive gear, ensuring stable and consistent feeding into the extruder.
Key Features
Extruder arm for Artillery 3D printers
Keeps filament securely in place
Works with the drive gear for stable feeding
Ensures consistent extrusion quality
Durable and easy to replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery X/Y-axis Belt – 750 mm
The GT2 Belt for the X- and Y-axis on Artillery Hornet, Genius, and Genius Pro is a precision replacement part designed for accurate motion transmission. With a length of 750 mm, it ensures stable and consistent movement of the print head and bed, supporting high-quality print results.
Key Features
Compatible with Artillery Hornet, Genius, and Genius Pro
GT2 belt type for precise motion control
Length: 750 mm
Ensures stable and accurate axis movement
Durable construction for reliable performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Z-axis Lead Screw
Replacement Z-axis lead screw for the Artillery Hornet. This precision threaded screw drives the vertical motion of the build platform, providing smooth and accurate layer positioning.
Key Features
Compatibility: Artillery Hornet (Z-axis mechanism)
Transfers motion from the Z motor to the platform via trapezoidal thread
Direct 1:1 replacement for a bent, worn, or noisy lead screw
Helps reduce wobble/backlash and restores consistent Z movement
Installs using the original coupler and Z nut (not included unless stated)
Maintenance tip: lightly lubricate and check alignment after installationSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Heat Sink
Replacement heat sink for the Artillery Hornet hotend. The finned cold-end dissipates heat from the heatbreak to prevent heat creep and maintain stable extrusion.
Key Features
Compatibility: Artillery Hornet (hotend heat sink/cold-end).
Function: Draws heat away from the heatbreak to keep filament solid above the melt zone.
Direct 1:1 replacement; fits the factory mounting points and fan/duct layout.
Lightweight metal construction with fins for efficient airflow.
Restores reliable retractions and reduces jams from overheating.
Installation tip: power off and fully cool; transfer the fan/duct and heatbreak carefully; keep airflow unobstructed.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet PTFE Tube – ∅2 x ∅4 / 21 mm
Pre-cut PTFE tube segment (∅2 mm ID × ∅4 mm OD, 21 mm length) for the Artillery Hornet. Sits inside the hotend/heatbreak to guide 1.75 mm filament with low friction and provide thermal isolation for stable feeding.
Key Features
Compatibility: Artillery Hornet (hotend liner).
Dimensions: ∅2 mm inner, ∅4 mm outer, length 21 mm.
Function: Low-friction liner for 1.75 mm filament; helps maintain a consistent melt path.
Direct 1:1 replacement for a burnt, deformed, or worn PTFE insert.
Improves extrusion reliability and reduces jams/stringing when renewed.
Installation tip: power off and cool; ensure square ends and full seating against the nozzle/heatbreak.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet PTFE Tube – ∅2 x ∅4 / 46 mm
The Artillery Hornet PTFE Tube (∅2 × ∅4 / 46 mm) is an original replacement part for the Hornet 3D printer. It guides the filament within the extruder system, ensuring smooth feeding and reliable print performance.
Key Features
OEM PTFE tube for Artillery Hornet
Inner diameter: 2 mm / Outer diameter: 4 mm
Length: 46 mm
Provides smooth filament feeding
Durable and heat-resistant materialSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Heat Bed
The Artillery Hornet Heat Bed is an original replacement part for the Hornet 3D printer. It provides even heating across the build surface, ensuring strong adhesion during printing and reducing the risk of warping.
Key Features
OEM heat bed for Artillery Hornet
Provides uniform heating for stable printing
Ensures reliable first-layer adhesion
Helps minimize print warping
Durable and easy to replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet End-Stop Limit Switch
The Artillery Hornet End-Stop Limit Switch is an original replacement switch designed for the Hornet 3D printer series. It detects the position of the print head at the end of an axis, ensuring accurate homing and safe operation during printing.
Key Features
Original spare part from Artillery 3D for the Hornet series
Mechanical limit switch for detecting axis end positions
Ensures precise homing and alignment safety
Compact and durable design adapted for Hornet printers
Easy replacement to maintain accuracy and performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Print Head Connection Board
The Artillery Hornet Print Head Connection Board is an original replacement part for the Hornet 3D printer. It manages the electrical connections between the print head components, including the extruder, hotend, and cooling fans, ensuring reliable signal and power transmission.
Key Features
OEM connection board for Artillery Hornet
Located at the print head assembly
Connects extruder, hotend, and fans
Ensures stable power and signal transfer
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Extruder Board
The Artillery Hornet Extruder Board is a replacement board that controls extruder operations in the Hornet printer, managing motor signals and filament feed.
Key Features
OEM replacement board for Artillery Hornet
Handles extruder motor signals and filament feed control
Restores functionality in case of board failure
Easy to install replacement
Cost-efficient spare partSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Power Supply
Replacement power supply for the Artillery Hornet 3D printer. It replaces the original AC-to-DC unit that powers the mainboard, heaters, and motors, ensuring stable and reliable operation.
Key Features
Compatibility: Artillery Hornet
Converts AC mains to the DC rail used by printer electronics
Direct 1:1 replacement for failed, unstable, or noisy units
Match output voltage/current and DC plug type to the original label
Regional mains cable/plug may vary; use correct cable for your region
Safety: disconnect from AC power before installation or serviceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Left Filament Cooling Fan – 40 x 40 x 10 mm
Original left filament cooling fan for Artillery Hornet 3D printers. This 40 × 40 × 10 mm, 24 V fan ensures stable airflow to cool the extruded filament, preventing overheating and improving print quality. Designed as a direct OEM replacement for the left-side cooling system.
Key Features
Compatible with Artillery Hornet
Left filament cooling fan
Size: 40 × 40 × 10 mm
Operating voltage: 24 V
Ensures stable filament cooling and print consistency
OEM replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Right Filament Cooling Fan – 40 x 40 x 10 mm
3D World, Pezzi di ricambio e accessoriArtillery Hornet Right Filament Cooling Fan – 40 x 40 x 10 mm
The Artillery Hornet Right Filament Cooling Fan (40 × 40 × 10 mm) is an original replacement part designed to provide effective cooling for printed layers. By maintaining optimal airflow, it improves adhesion, reduces warping, and ensures consistent print quality.
Key Features
Original cooling fan for Artillery Hornet
Dimensions: 40 × 40 × 10 mm
Provides stable airflow for filament cooling
Improves surface quality and layer adhesion
Durable and easy to installSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Print Head Fan – 30 x 30 x 10 mm
The Print Head Fan for Artillery Hornet is an original replacement cooling fan designed to maintain optimal hotend performance. Measuring 30 × 30 × 10 mm and operating at 24 V, it provides stable airflow for efficient cooling, helping prevent overheating and support consistent extrusion quality.
Key Features
Original print head cooling fan for Artillery Hornet
Dimensions: 30 × 30 × 10 mm
Operating voltage: 24 V
Provides stable airflow for efficient cooling
Helps prevent hotend overheating
Easy to install and replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-3040 Pro 5010 Axial fan
The Creality 3D CR-3040 Pro 5010 Axial Fan is a compact cooling fan designed to maintain stable airflow inside the CR-3040 Pro. The 50×50×10 mm form factor provides efficient, directed cooling for components that benefit from continuous air circulation, supporting consistent print quality during long jobs. It’s a straightforward replacement for worn fans and helps keep the system running reliably.
Key Features
Designed for Creality CR-3040 Pro
Compact 50×50×10 mm axial form factor
Steady airflow for stable, repeatable print results
Durable construction suited for extended runtime
Straightforward swap for aging or noisy fans
Helps maintain consistent temperatures around critical componentsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-3040 Pro 6025 Axial fan
The Creality CR-3040 Pro 6025 Axial Fan is an OEM replacement fan for the printer enclosure, designed to provide effective cooling and maintain stable operating temperatures. It helps reduce heat buildup, improves reliability, and supports consistent print quality under long or high-demand prints.
Key Features
OEM 6025 axial fan for Creality CR-3040 Pro
60 × 60 × 25 mm size
12 V operating voltage
High-speed airflow to reduce heat buildup
Durable build for continuous operation
Easy drop-in replacement for your enclosure fanSKU: n/a -
3D World, Pezzi di ricambio e accessori
F160/DX/DE X,Y motor (42HS48)
Stepper motor for the X and Y axes of CreatBot F160, DX, and DE 3D printers. Original CreatBot part (type 42HS48) with directly installed cable—no connector required.
Key Features
Original CreatBot spare part
Compatible with F160, DX, and DE models
Type: 42HS48 stepper motor
Cable permanently attached—no connector neededSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-30 Belt kit
The Creality 3D CR-30 Belt Kit is an official replacement set designed for the belt-driven system of the CR-30. Built to original specifications, it restores smooth and accurate motion and helps keep the printer running reliably over time.
Key Features
OEM belt kit for Creality CR-30
Restores precise belt-driven motion
Built to original factory specifications
Durable materials for long-term use
Supports consistent print quality
Quick and easy installationSKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D E3 Right Print Head with Silicon Carbide Nozzle 0.4mm
3D World, Pezzi di ricambio e accessoriRaise3D E3 Right Print Head with Silicon Carbide Nozzle 0.4mm
The Raise3D E3 Right Print Head with Silicon Carbide Nozzle 0.4mm is an original replacement print head for Raise3D E3 Series printers. It is designed to deliver stable, consistent printing performance and is suitable for a wide range of everyday applications.
Key Features
Original right print head for Raise3D E3 Series
Silicon carbide nozzle with 0.4mm orifice
Designed for consistent extrusion and reliable results
Suitable for general-purpose printing tasks
Intended for maintenance or replacement needsSKU: 6942267307147 -
3D World, Pezzi di ricambio e accessori
Raise3D E3 Flexible Filament Auxiliary Feeder
The Raise3D Flexible Filament Auxiliary Feeder is an add-on feeding system designed for the E3 Series. It supports flexible and elastic filaments such as TPU and TPE, and enables stable, high-speed printing with soft materials.
Key Features
Improves feeding performance for flexible filaments like TPU
Supports high-speed printing up to 200 mm/s with TPU
Reduces tension and feeding resistance
Easy plug-and-play installation on the E3 printerSKU: 6942267307031 -
3D World, Pezzi di ricambio e accessori
CORE One Sheets Full Set
The CORE One Sheets Full Set includes five premium print sheets designed specifically for the Prusa CORE One 3D printer. Each sheet offers a unique surface finish to ensure optimal adhesion and release for a wide range of materials.
Highlights:
Smooth PEI Print Sheet for fine detail and easy release
Textured Powder-coated Sheet for matte finishes and strong adhesion
Satin Powder-coated Sheet for balanced texture and performance
PP Powder-coated Sheet for polypropylene-based materials
PA-Nylon Powder-coated Sheet for nylon and engineering filaments
Complete surface set designed exclusively for the Prusa CORE OneSKU: n/a -
3D World, Pezzi di ricambio e accessori
CORE One Sheets Bundle
The CORE One Sheets set provides three high-quality print sheets (Smooth PEI, Textured powder-coated, Satin powder-coated) designed specifically for the Prusa CORE One 3D printer.
Highlights:
Included: Smooth PEI sheet, Textured powder-coated sheet, Satin powder-coated sheet
Optimised for the CORE One build platform
High adhesion, durable spring-steel base
Tool-free magnetic swap via MK52 heatbed magnets
Perfect for a wide range of materials and purposesSKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D CF Kit
The Raise3D E3 CF Kit equips the E3 Series for composite and other abrasive materials. It includes a Left Print Head with a 0.4 mm silicon carbide nozzle and auto-leveling system assembly, and a Right Print Head with a 0.4 mm silicon carbide nozzle.
Key Features
Includes left and right print heads for E3
0.4 mm silicon carbide nozzles for abrasive materials
Left print head with integrated auto-leveling system
Purpose-built for composite and fiber-reinforced filamentsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D Flex Kit
The Raise3D E3 Flex Kit is a complete bundle that enables flexible-filament printing on the E3 Series. It includes a Flexible Filament Auxiliary Feeder and 1 kg of Premium TPU-95A (White).
Key Features
Includes Auxiliary Feeder and 1 kg TPU-95A (White)
Supports flexible materials such as TPU
Auxiliary feeder ensures smooth filament feeding
Reliable performance with flexible filamentsSKU: n/a -
3D World, 3D-Stampanti e altro
Raise3D E3
Raise3D E3 is an IDEX 3D printer designed for reliable and versatile production. With independent dual extruders, high-speed performance, and wide material compatibility — including flexible and composite filaments — it delivers prototypes and end-use parts with outstanding surface quality. Available in two versions: the Basic Package for everyday materials, and the Full Package with Flex Kit and CF Kit for TPU and composites.
Key Features
IDEX system for multi-material, multi-color, mirror and duplication printing
Print speed up to ~200 mm/s with build volume of 330×240×240 mm (single) / 295×240×240 mm (dual)
Wide material compatibility incl. PLA, ABS, PETG, TPU and composites
Flex Kit (TPU up to 200 mm/s) and CF Kit (PET CF, PET GF, PPS CF) included in Full Package
Pro Ironing technology for injection molding-like surface finish (Ra < 2 μm)
Dual material storage with desiccant, auto bed leveling, power-loss recovery & filament run-out sensorsSKU: n/a -
3D World, 3D-Stampanti e altro
Bambu Lab H2S
Bambu Lab H2S är en 3D-skrivare med enkelmunstycke, byggd för användare som vill ha mer utrymme, hastighet och tillförlitlighet. Den har en stor byggvolym, exakt extrudering och termisk kontroll och kan uppgraderas till en komplett tillverkningslösning med laser och AMS-tillval.
Viktiga egenskaper
Stor byggvolym: 340 × 320 × 340 mm
Servodriven extruder med closed-loop och 5 µm optisk kalibrering
Munstycke upp till 350 °C och aktivt uppvärmd kammare upp till 65 °C
Valbart tillval: 10 W laser- och skärmodul
AI-driven filamentövervakning med 23 sensorer och 3 kameror
Core XY-rörelsesystem för snabb och exakt prestandaSKU: 6937285505798 -
3D World, 3D-Stampanti e altro
Bambu Lab H2S AMS Combo
The Bambu Lab H2S AMS Combo is a reliable and high-performance 3D printer with a spacious build volume, automatic filament management, and advanced monitoring. It handles a wide range of materials, offers excellent precision, and prints at impressive speeds — making it a strong choice for both hobbyists and professionals.
Key Features
Large build volume: 340 × 320 × 340 mm
Automatic filament handling with AMS 2 Pro (expandable up to 16 spools)
Servo-driven extruder with optical calibration for high precision
Nozzle up to 350 °C and heated chamber up to 65 °C
Real-time monitoring with sensors and cameras
Print speeds up to 1000 mm/sSKU: 6937285505705 -
3D World, 3D-Stampanti e altro
UltiMaker S8
The UltiMaker S8 is a high-performance 3D printer that delivers up to four times the productivity of its predecessor while enhancing print quality. This is made possible by the advanced UltiMaker Cheetah motion planner, high-flow print cores, and an improved feeder system. With industry-leading dual extrusion capabilities and an open material platform, the UltiMaker S8 enables fast and reliable multi-material printing.
Key Features
UltiMaker Cheetah motion planner for improved efficiency
Powered by the UltiMaker Ecosystem for seamless integration
High-flow print cores and enhanced feeder system
The fastest dual-material 3D printer with an open material platformSKU: 8719874988537 -
3D World, Pezzi di ricambio e accessori
Bambu Lab AMS Hub
Expand your Bambu Lab AMS setup with the AMS Hub – this compact accessory lets you connect multiple AMS units to your 3D printer, unlocking larger multi-material and multi-color print jobs. It improves communication and filament refilling across connected AMS systems, helping your workflow stay smooth and efficient. Designed specifically for the Bambu Lab ecosystem, it’s a practical upgrade for users who want more flexibility from their printer.
Key Features
Expands AMS connectivity from 1 to up to 4 units (16 filament channels)
Enables complex multi-material and multi-color printing
Improves refilling efficiency between multiple AMS systems
Stable signal handling for reliable operation
Simple installation on the rear of the printer
Compatible with Bambu Lab A1 and A1 miniSKU: 6937285508287 -
3D World, Pezzi di ricambio e accessori
Bambu Lab Hotend Heating Assembly
Bambu Lab Hotend Heating Assembly (A1 / A1 Mini) is a direct replacement heating unit designed specifically for Bambu Lab’s A1 and A1 Mini 3D printers. It supports the printer’s quick-swap hotend system and is built to deliver stable heating up to 300 °C. With an integrated thermistor for accurate temperature feedback, this assembly helps ensure consistent extrusion and reliable print results. It’s an ideal solution when replacing a worn or faulty heating unit.
Key Features
Compatible with Bambu Lab A1 and A1 Mini
Quick-swap design for fast and easy replacement
Supports temperatures up to 300 °C
Integrated thermistor for precise temperature control
Includes mounting screws for straightforward installation
Built for reliable, long-term performanceSKU: 6975337034322
