Shop
Visualizzazione di 3907-3948 di 5323 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Extruder Arm
The Extruder Arm for the Artillery Sidewinder X1 is a replacement support component that mounts and stabilizes the extruder along the X-axis of the printer.
Key Features
Compatible with Artillery Sidewinder X1
Supports the extruder’s weight and alignment on the X-axis
Helps reduce filament misfeeds and improve print quality
OEM spare part
Easy to install
Ensures stable operation during high-speed movesSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery X1 Z-axis Coupler
Replacement Z-axis coupler for the Artillery Sidewinder X1. Connects the Z stepper motor shaft to the lead screw and transfers torque for reliable vertical motion.
Key Features
Compatibility: Artillery Sidewinder X1 (Z-axis motor-to-lead-screw coupling).
Function: Mechanical shaft coupler linking the stepper shaft to the Z lead screw.
Direct 1:1 replacement; fits the original motor and lead screw interfaces.
Helps restore smooth Z travel and reduce wobble from worn or slipping couplers.
Machined metal body with set screws for a secure, concentric grip.
Installation tip: power off; align shafts, match the set screw to the flat, tighten evenly, and avoid bottoming the shafts.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Fan Mesh – 40 mm
Protective fan mesh (40 mm) for the Artillery Sidewinder X1. It mounts over the 40 mm fan to prevent debris and accidental contact while maintaining proper airflow for cooling performance.
Key Features
Compatible with Artillery Sidewinder X1 using 40 mm fans
Acts as a guard against dust, filament strands, and accidental finger contact
Standard 40 mm pattern with 4-corner mounting holes
Mesh design ensures airflow with minimal restriction
Easy installation using existing fan screws
Note: Fan not included; check fan orientation before reassemblySKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Shaft Sleeve
The Artillery Sidewinder X1 Shaft Sleeve is a genuine replacement part designed to protect and support the printer’s moving shafts. Made from durable materials, it helps reduce wear, ensures smooth motion, and maintains long-term reliability of the motion system.
Key Features
Compatible with Artillery Sidewinder X1 3D printer
Protects and supports motion shafts
Reduces wear and extends service life
Ensures smooth and stable movement
Durable and reliable constructionSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Heat Sink
The Artillery Sidewinder X1 Heat Sink is an original replacement part designed for the hotend assembly of the Sidewinder X1 3D printer. It dissipates heat effectively, preventing heat creep and ensuring consistent extrusion performance.
Key Features
OEM heat sink for Artillery Sidewinder X1
Part of the hotend assembly
Prevents heat creep for stable extrusion
Durable and precisely machined design
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10 V2 Translate box kit
The Creality CR-10 V2 Translate Box Kit is a spare part for the CR-10 V2 printer, providing a translation or adapter box for its control or electrical components.
Key Features
Designed for Creality CR-10 V2
Adapter/translate box for control electronics
Helps protect or extend control box functionality
OEM spare part
Easy to install
Affordable maintenance or upgrade optionSKU: n/a -
3D World, Pezzi di ricambio e accessori
Micro Swiss Direct Drive Extruder (Extruder Only) for Creality CR-10 / Ender 3 Printers
3D World, Pezzi di ricambio e accessoriMicro Swiss Direct Drive Extruder (Extruder Only) for Creality CR-10 / Ender 3 Printers
Micro Swiss Direct Drive Extruder is a drop in system for CR10 / Ender Printers
Features
No modification required, simple plug and play
No printed brackets or sandwichesSKU: 0769407527663 -
-
-
-
-
-
3D World, Pezzi di ricambio e accessori
Anet ET5 LCD Cable
Replacement LCD cable for the Anet ET5. Connects the front LCD/touch module to the mainboard to carry display data, backlight power, and (where applicable) touch signals.
Key Features
Compatibility: Anet ET5 (LCD/display module connection).
Function: Links the control board to the LCD for UI/status and, if fitted, touch input.
Direct 1:1 replacement matching factory routing and keyed connectors (verify connector type and length to your original).
Pre-terminated plugs or FPC/ZIF interface for solder-free installation.
Restores stable screen output, backlight, and responsive UI.
Installation tip: power off; observe ESD care; align connector orientation/Pin-1, lock ZIF tabs (if present), avoid sharp bends, and verify display in the menu.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Wanhao GR2 Mainboard
Replacement mainboard for the Wanhao GR2 resin printer. This central control PCB coordinates Z-axis motion and manages communication with the LCD panel, UV LED/light engine, touchscreen, and connected sensors.
Key Features
Compatibility: Wanhao GR2 (main control board).
Function: Controller for Z stepper, LCD imaging signals, UV LED trigger, touchscreen, and I/O.
Direct 1:1 replacement using factory connectors and mounting standoffs.
Restores reliable homing, exposure timing, and user interface functions.
Pre-terminated sockets for quick, solder-free service.
Installation tip: power off and observe ESD care; label cables; re-home Z and run exposure/level checks after replacement.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D N2 / Pro2 X/Y-axis Belt
The Raise3D N2 / Pro2 X/Y-axis Belt is a genuine replacement part designed to maintain precise motion control of your 3D printer. Made from durable, reinforced rubber materials, it ensures smooth transmission, accurate positioning, and consistent print quality over long-term use.
Key Features
Compatible with Raise3D N2 and Pro2 series
Reinforced rubber for long-lasting durability
Ensures precise and smooth motion control
Supports accurate X/Y-axis positioning
Reliable replacement for consistent print qualitySKU: 6970240721413 -
3D World, Pezzi di ricambio e accessori
Antclabs BLTouch extension cable SM-XD 1 m
The Antclabs BLTouch extension cable SM-XD 1 m is an original extension cable with XH connector for the BLTouch auto-leveling sensor. Designed to bridge longer distances in the printer, it ensures reliable signal transfer and clean cable routing.
Key Features
Original Antclabs extension cable (SM-XD) for BLTouch
XH-style connector
1 m length for flexible placement
Preserves reliable signal and tidy cable setup
Easy to install
Package includes: 1× extension cableSKU: SM-XD-1000 -
3D World, Pezzi di ricambio e accessori
Antclabs BLTouch extension cable SM-XD 1.5 m
The Antclabs BLTouch extension cable SM-XD (1.5 m) extends the connection between your BLTouch auto-leveling sensor and the controller board, providing flexibility in installation across various printer configurations.
Key Features
Genuine Antclabs accessory with XH-style connector
1.5 m length for enhanced routing flexibility
Shielded cable ensures stable, interference-free signal
Oxygen-free copper conductors for reliable performance
Plug-and-play installation—simply connect to BLTouch and board
Ideal for larger or modified 3D printer setupsSKU: SM-XD-1500 -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10S Build Surface sticker 410 x 410 mm
The Creality 3D CR-10S Build Surface Sticker (410 × 410 mm) is a genuine replacement sheet that refreshes your print bed. The textured surface helps first layers stick more consistently, while the peel-and-stick backing makes installation simple. It is sized for the CR-10S and works well with a heated bed.
Key Features
OEM build surface for Creality CR-10S
410 × 410 mm sheet with adhesive backing
Textured top layer for reliable first-layer adhesion
Works with common materials on a heated bed
Protects the platform and is easy to replace
Trim-friendly if minor adjustment is neededSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10S Mini Build Surface sticker 305 x 235 mm
Buy this Build Surface Sticker 305 * 235 mm for your Creality 3D CR-10S Mini 3D printer.
Creality 3D CR-10S Mini Build Surface Sticker 305 * 235 mm
Build Surface Sticker 305 * 235 mm
Fits Creality 3D CR-10S MiniSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10S Mini Glass Plate with Special Chemical Coating 305 x 235 mm
3D World, Pezzi di ricambio e accessoriCreality 3D CR-10S Mini Glass Plate with Special Chemical Coating 305 x 235 mm
The Creality CR 10S Mini Glass Plate is a factory-standard replacement build surface featuring a borosilicate glass core and proprietary chemical (carborundum) coating. It ensures strong first-layer adhesion during printing and effortless part removal as the bed cools—ideal for PLA, TPU, and ABS on CR 10S Mini and other 310 × 310 mm printers.
Key Features
• Borosilicate glass plate with special carborundum chemical coating
• Robust adhesion during hot prints; automatic release upon cooling
• Scratch- and wear-resistant surface with 8 Mohs hardness
• Flat, durable build surface ideal for high-temperature filaments
• Easy to clean with water or isopropyl alcohol
• Direct replacement for CR 10S Mini and other 310 × 310 mm Creality printersSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F430 PCB Board
Replacement control PCB (mainboard) for the CreatBot F430. This central controller coordinates X/Y/Z motion and manages the dual-extruder heaters, temperature sensing, fans, endstops, touchscreen, and other I/O.
Key Features
Compatibility: CreatBot F430 (mainboard/control PCB).
Function: Drives stepper motors and controls heater outputs, thermistor/temperature inputs, fans, and peripherals; communicates with the display/touch interface.
Direct 1:1 replacement using factory connectors and mounting standoffs.
Restores reliable homing, temperature control, and stable toolhead communication.
Pre-terminated sockets for solder-free service; board revision may differ but matches original interfaces.
Installation tip: power off and observe ESD care; label cables, verify firmware/revision match, then re-home axes and test heat/fans.SKU: n/a -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 310 x 310 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117881 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 510 x 510 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117874 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 410 x 410 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117867 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 220 x 220 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117850 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 310 x 320 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117843 -
3D World, 3D-Stampanti e altro
Mayku FormBox Clear Sheets 1.0mm (20 Pack)
This new 1.0 mm PETg sheet offers the same reliable properties as the standard Cast Sheet but with added strength and durability. Its increased thickness makes it more rigid and slightly more heat-resistant, ideal for long-lasting mold creation and precise product prototyping. The material remains fully transparent, food-safe (FDA grade), and non-stick for clean results.
These sheets are 100% recyclable through domestic waste collection, making them a sustainable choice for high-quality modeling and professional applications.
SKU: 5060578580101 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 235 x 235 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117836 -
3D World, Pezzi di ricambio e accessori
Creality 3D 3D Printer Enclosure 700 x 750 x 900
This 700 × 750 × 900 mm enclosure from Creality offers a controlled printing environment for larger printers, reducing drafts, dust and temperature fluctuations. Built with a sturdy iron-tube frame and flame-retardant aluminium-film interior, it also supports quieter operation and improved print quality. Ideal for both advanced hobbyists and professionals looking to upgrade their workspace.
Key Features
Dimensions: 700 × 750 × 900 mm
Compatible with Ender 5 Plus, CR-10S 300 and CR-10S Pro
Iron-tube frame with angle supports
Interior lining: flame-retardant aluminium film
Features tool pockets, inspection window and foldable design
Reduces warping, stabilises temperature and dampens noiseSKU: 6971636406860 -
3D World, Pezzi di ricambio e accessori
Creality 3D 3D Printer Enclosure 480 x 600 x 720
The Creality 3D Printer Enclosure (480 × 600 × 720 mm) provides a dedicated controlled chamber for your FDM printer, helping to reduce drafts, dust and temperature fluctuations. Its compact yet spacious design makes it a smart upgrade for both hobby and professional environments. Built with a sturdy frame and practical features, it offers improved print stability and cleaner results.
Key Features
Internal dimensions: 480 × 600 × 720 mm
Rigid frame structure for stable printer installation
Enclosed shell helps shield print from drafts and ambient changes
Transparent front panel allows monitoring without disruption
Compatible with a variety of printer models and setups
Easy to assemble and integrates smoothly into existing workspaceSKU: 0649910377170
