3D World
Visualizzazione di 673-714 di 6446 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
BigTreeTech CB1 V2.2 Single board
The BigTreeTech CB1 V2.2 Single Board is a powerful, cost-effective compute module designed as a drop-in alternative to the Raspberry Pi Compute Module 4 (CM4). With a quad core Cortex A53 processor, onboard Wi-Fi, Ethernet, and HDMI output, it’s optimized for 3D printing applications—particularly when running Klipper firmware on BigTreeTech motherboards.
Key Features
Quad core Allwinner H616 (Cortex A53) @ 1.5 GHz with Mali G31 GPU
1 GB DDR3 RAM for smooth multitasking
4K HDMI 2.0A support for full-resolution display output
Dual connectivity: 100 M Ethernet and 2.4 GHz Wi-Fi
Compatible with Raspberry Pi CM4 form factor and BTB interface
Seamless integration with BigTreeTech Manta series boards and Klipper ecosystemSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Power supply 24V-200W
The CreatBot Power Supply 24V-200W is an original replacement unit designed for CreatBot 3D printers. It delivers stable 24V output at 200W power, ensuring reliable performance for motors, heaters, and electronics during continuous operation.
Key Features
OEM power supply for CreatBot 3D printers
Output: 24V, 200W
Ensures stable power for motors and heaters
Supports consistent performance in long prints
Durable and reliable construction
Direct-fit replacement for easy servicingSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Power supply 24V-150W
The CreatBot Power Supply 24V-150W is an original replacement part designed to provide stable and reliable power to your CreatBot 3D printer. With a 24 V / 150 W rating, it ensures safe and consistent operation during continuous printing.
Key Features
OEM power supply 24 V / 150 W
Delivers stable and reliable power output
Supports continuous and safe printer operation
Compact and durable design
Easy to install as a replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 Z-Motor
The CreatBot F1000 Z-Motor is an original replacement stepper motor designed for the Z-axis of the CreatBot F1000 3D printer. It ensures stable vertical movement of the build platform, maintaining accuracy and print quality during large-scale printing tasks.
Key Features
OEM Z-axis stepper motor for CreatBot F1000
Provides stable vertical platform motion
Ensures precision in large-scale prints
Durable construction for continuous use
Direct-fit replacement for easy servicing
Supports consistent print quality and reliabilitySKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 Driver for Z
The CreatBot F1000 Driver for Z is an original spare part designed to control the Z-axis movement of the CreatBot F1000 3D printer. It ensures precise vertical motion, stable layer positioning, and reliable printing performance.
Key Features
OEM Z-axis driver for CreatBot F1000
Ensures accurate vertical motion control
Supports stable layer alignment and print quality
Durable component for long-term use
Easy to replace as part of printer maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 Driver for X,Y
The CreatBot F1000 Driver for X,Y is an original replacement motion driver module for the X- and Y-axis stepper motors on the F1000 3D printer. It regulates current, microstepping, and signal timing to ensure smooth, accurate movement of the print head across large build areas.
Key Features
OEM motion driver for F1000 X- and Y-axes
Controls motor current and microstepping
Supports precise, low-noise motion
Direct-fit replacement for quick service
Restores reliable XY positioning
Designed for continuous, large-format printingSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 Y-Motor
The CreatBot F1000 Y-Motor is an original stepper motor designed for the Y-axis of the CreatBot F1000 3D printer. It ensures precise horizontal motion of the print head, supporting accuracy and reliability during large-format printing tasks.
Key Features
OEM Y-axis stepper motor for CreatBot F1000
Provides stable motion for the print head
Ensures accuracy in large-scale prints
Durable design for continuous operation
Direct-fit replacement for easy maintenance
Supports consistent print quality and performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 X-Motor
The CreatBot F1000 X-Motor is an original stepper motor designed for the X-axis of the CreatBot F1000 3D printer. It drives precise horizontal movement of the print head, ensuring accuracy and reliability during large-format printing tasks.
Key Features
OEM X-axis stepper motor for CreatBot F1000
Provides precise horizontal motion of the print head
Ensures accuracy in large-scale 3D prints
Durable design for continuous operation
Direct-fit replacement for simplified servicing
Supports consistent print quality and performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 / D600 U disk reader PCB
The CreatBot F1000 / D600 U Disk Reader PCB is an original replacement board that enables USB flash drive connectivity for the F1000 and D600 series 3D printers. It ensures stable recognition and data transfer, allowing users to reliably load print files via U disk.
Key Features
OEM PCB for F1000 and D600 series printers
Provides U disk (USB flash drive) connectivity
Ensures stable data transfer to the printer
Supports reliable loading of print files
Direct-fit replacement for easy installation
Durable design for long-term useSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Power Check PCB
The CreatBot Power Check PCB is an original replacement board used to monitor printer power status and signal the controller in the event of an interruption. It helps protect ongoing jobs by enabling proper fault handling and coordinated recovery with the mainboard.
Key Features
OEM power-status detection PCB for CreatBot printers
Monitors supply status and reports interruptions
Interfaces with the mainboard for safe handling
Supports job protection and recovery workflows
Direct-fit replacement for straightforward service
Durable design for long-term reliabilitySKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 Extruder PCB
The CreatBot F1000 Extruder PCB is a genuine spare part designed to control the extruder system of the CreatBot F1000. It ensures stable operation, accurate temperature regulation, and consistent filament feeding for reliable performance in large-scale 3D printing.
Key Features
Original PCB for the CreatBot F1000
Ensures stable and precise filament feeding
Accurate and reliable temperature control
Fully compatible with the F1000 extruder system
Easy to replace during maintenance or repairSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F1000 Motherboard
The CreatBot F1000 Motherboard is the original control board for the F1000 3D printer. It coordinates motion control, heaters, sensors, and user I/O to maintain stable operation during large-format printing and integrates as a direct replacement for service or repair.
Key Features
OEM control board for CreatBot F1000
Manages motion, heaters, and sensors
Ensures stable operation for large builds
Direct-fit replacement to reduce downtime
Compatible with existing wiring and firmware setup
Supports consistent print quality and reliabilitySKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot spring nut
The CreatBot Spring Nut is an original replacement fastener used in the assembly of CreatBot 3D printers. It provides secure positioning for threaded rods and moving parts, ensuring mechanical stability and consistent printer performance.
Key Features
OEM spring nut for CreatBot 3D printers
Ensures stable mounting of threaded rods
Supports smooth mechanical movement
Durable construction for long-term use
Direct-fit replacement for easy maintenance
Maintains reliable printer performanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Servo for Auto-rising
The CreatBot Servo for Auto-rising is a genuine replacement part that powers the automatic lifting mechanism in CreatBot printers. It ensures smooth, precise, and reliable movement, keeping the auto-rising function working flawlessly. Built for durability and easy installation, this servo motor helps maintain consistent performance over time.
Key Features
Original servo motor for CreatBot auto-rising system
Ensures precise and reliable lifting movements
Supports smooth automatic operation
Durable and long-lasting construction
Easy to install as a replacement part
Keeps auto-rising function consistent and stableSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Servo for bed- leveling
The CreatBot Servo for Bed-Leveling is a genuine replacement part that drives the automatic bed leveling system in CreatBot printers. It ensures accurate, smooth, and reliable movement, keeping the print platform precisely calibrated for consistent results. Built for durability and easy installation, this servo motor helps maintain stable performance over time.
Key Features
Original servo motor for CreatBot bed-leveling system
Ensures precise and reliable platform calibration
Supports smooth automatic adjustment
Durable and long-lasting construction
Easy to install as a replacement part
Keeps bed-leveling consistent and stableSKU: n/a -
-
3D World, Pezzi di ricambio e accessori
Flashforge Creator 3 Pro Right Extruder Board
The Flashforge Creator 3 Pro Right Extruder Board is an OEM adapter PCB that connects the right extruder to the printer’s main electronics. It controls the thermistor, heater cartridge, cooling fan, and extruder motor, ensuring stable signal routing and power delivery.
Key Features
Official replacement adapter board for the right extruder of Creator 3 Pro
Interfaces with thermistor, heater, fan, and extruder motor
Provides reliable signal and power transmission
Plug-and-play installation—no soldering requiredSKU: n/a -
3D World, Pezzi di ricambio e accessori
Flashforge Creator 3 Pro Left Extruder Board
Original left extruder control board for Flashforge Creator 3 Pro 3D printers. This OEM replacement board manages the functions of the left extruder, including heating, temperature sensing, and motor control. Designed to ensure reliable communication with the printer’s mainboard, it restores full functionality when the original part is damaged or faulty.
Key Features
Compatible with Flashforge Creator 3 Pro
Controls heating, temperature sensor, and motor functions
Ensures stable communication with the printer mainboard
OEM replacement part for reliable performance
Restores full functionality of the left extruder
Durable design for long-term useSKU: n/a









































