Pezzi di ricambio e accessori
Visualizzazione di 4327-4368 di 4707 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Flashforge Inventor X-axis Motor Cable
Replacement X-axis motor cable for the Flashforge Inventor. Connects the X-axis stepper motor to the control board, carrying phased drive signals for accurate and reliable movement.
Key Features
Compatibility: Flashforge Inventor (X-axis stepper connection).
Function: Links X motor to the mainboard for precise motion control.
Pre-terminated connectors for quick, solder-free installation.
Direct 1:1 replacement for damaged, loose, or intermittent cables.
Follows the printer’s original internal routing for a tidy fit.
Installation tip: power off the printer; secure the cable and verify X homing afterward.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Flashforge Inventor X-axis End Stop Cable
The Flashforge Inventor X-axis End Stop Cable is an original replacement part for the Inventor 3D printer. It connects the X-axis end stop switch to the mainboard, ensuring accurate homing and reliable motion control.
Key Features
OEM end stop cable for Flashforge Inventor
Designed for the X-axis limit switch
Provides stable signal transmission
Ensures accurate axis calibration
Easy to install during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Flashforge Inventor Z-axis Motor Cable
Replacement Z-axis motor cable for the Flashforge Inventor. Connects the mainboard’s stepper driver to the Z-axis stepper motor to provide reliable vertical motion.
Key Features
Compatibility: Flashforge Inventor (Z-axis motor connection).
Function: Harness between the control board’s stepper driver and the Z-axis stepper motor.
Direct 1:1 replacement that matches factory length, routing, and keyed connectors.
Pre-terminated plugs for quick, solder-free installation.
Restores consistent Z driving when original cable is worn, pinched, or intermittent.
Installation tip: power off; route as original, avoid sharp bends, secure with ties; re-home Z and verify bed leveling.SKU: n/a -
-
3D World, Pezzi di ricambio e accessori
Flashforge New Finder X-axis End Stop Switch Cable
The Flashforge New Finder X-axis End Stop Switch Cable is an original replacement part for the New Finder 3D printer. It connects the X-axis end stop switch to the mainboard, ensuring accurate homing and reliable motion control.
Key Features
OEM end stop switch cable for Flashforge New Finder
Designed for the X-axis limit switch
Provides stable and accurate signal transmission
Ensures reliable axis homing and calibration
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Flashforge New Finder Extruder Cable
The Extruder Cable for Flashforge New Finder is a genuine replacement part designed to restore reliable connectivity between the printer’s mainboard and the extruder. Built for durability and precision, it ensures stable performance and consistent printing results.
Key Features
Original replacement cable for Flashforge New Finder
Provides secure and stable connection to the extruder
Durable construction for long-lasting use
Ensures consistent printing performance
Easy to install as a direct replacementSKU: n/a -
3D World, Pezzi di ricambio e accessori
Flashforge New Finder Mainboard
Replacement mainboard for the Flashforge New Finder. This central control PCB manages motion control, the hotend heater and fans, end-stops, sensors, and the front interface, serving as a direct swap when the original board fails.
Key Features
Compatibility: Flashforge New Finder.
Function: Main control board for steppers, heater, fans, end-stops, and I/O.
Direct 1:1 replacement using the printer’s original connectors.
Restores reliable operation, accurate homing, and stable temperature control.
Designed to follow the factory cable routing for a clean install.
Installation tip: power off, observe ESD precautions, label cables, and verify homing after replacement.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Flashforge New Finder Z-axis End Stop Switch
Replacement Z-axis end stop switch for the Flashforge New Finder. This mechanical switch provides the Z-axis homing/limit signal, stopping the platform/nozzle at the correct reference position.
Key Features
Compatibility: Flashforge New Finder (Z-axis end-stop position)
Mechanical microswitch that signals Z home/limit to the control board
Direct 1:1 replacement for a worn, stuck, or failed switch
Standard mounting holes; fits the original bracket/position
Restores reliable Z-axis homing and referencing
Installation tip: power off printer; check actuation and recalibrate Z-offset/bed levelSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 Nozzle Thermistor
Original Creality 3D nozzle thermistor for Ender-3 series printers. Designed to accurately measure the nozzle temperature and ensure stable printing performance. Suitable as a direct replacement part.
Key Features
Compatible with: Ender-3 series (Ender-3, Ender-3 Pro, Ender-3 V2)
Function: monitors nozzle temperature
Ensures consistent heating and stable prints
OEM Creality spare part
Cable length: approx. 1150 mm
Contents: 1 × nozzle thermistorSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 Z-Axis Threaded rod
The Creality Ender-3 Z-Axis Threaded Rod is a genuine replacement part that drives the vertical motion of the printer’s Z-axis. Manufactured with precision threading, it ensures smooth layer transitions, stable height adjustment, and consistent print quality.
Key Features
OEM threaded rod for Creality Ender-3
Controls vertical movement of the Z-axis
Precision threading for smooth and stable operation
Essential for accurate layer height and print consistency
Durable metal construction for long-term reliability
Direct replacement with simple installationSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D 1 Meter PTFE tube
Original Creality 3D PTFE tube, 1 meter length. Designed for smooth filament feeding with 1.75 mm filament systems. A direct replacement or extension tube for a wide range of Creality 3D printers.
Key Features
Length: 1 meter PTFE tube
Made for 1.75 mm filament
4 mm outer / 2 mm inner diameter
Ensures smooth and reliable filament feeding
OEM Creality spare partSKU: n/a -
-
-
-
3D World, Pezzi di ricambio e accessori
Raise3D Hot End Silicon Cover (3pcs/set)
This Silicone Cover Set provides insulation for the hot end, helping to keep temperatures steady and improve overall printing efficiency. Each set includes three covers, making it easy to replace when needed.
Key Features
Silicone cover designed to protect the hot end
Delivered in a pack of three piecesBenefits
Stable temperature control for reliable prints
Reduced heating time for quicker starts
Keeps the hot end cleaner and easier to serviceSKU: 6970240722052 -
3D World, Pezzi di ricambio e accessori
Flashforge Adventurer – Pipe Joint
The Flashforge Adventurer Pipe Joint is a genuine replacement part for the Adventurer series feed path. It guides filament smoothly between sections of the system to maintain consistent extrusion and reliable printing. Built for everyday use, it’s a quick swap that helps restore performance and reduces feeding friction.
Key Features
Original replacement for Flashforge Adventurer series
Ensures smooth, low-friction filament guidance
Quick, straightforward installation
Durable, wear-resistant construction
Helps prevent jams and under-extrusion
Ideal to keep as a spare for maintenanceSKU: 6971940402589 -
-
-
-
3D World, Pezzi di ricambio e accessori
CreatBot DE / DX Heat Bed Connector
Replacement heat bed connector/cable for CreatBot DE and DX printers. Provides the high-current connection to the heated build plate and, where applicable, routes the bed temperature (thermistor) signal for stable heating control.
Key Features
Compatibility: CreatBot DE / DX heat bed connection points.
Function: Carries bed heater power and (where applicable) the thermistor/temperature signal.
Pre-terminated plug set matching the factory harness for plug-and-play service.
Direct 1:1 replacement for burnt, loose, or intermittent connectors.
Designed for correct routing and strain relief to reduce flex and heat stress.
Safety: power off and allow the bed to cool; verify polarity, latch engagement, and secure wiring.SKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot Levelling Nuts
The CreatBot Levelling Nuts are genuine replacement parts designed for adjusting and calibrating the print bed on CreatBot 3D printers. They allow precise leveling of the build platform, ensuring proper nozzle-to-bed distance for consistent first-layer adhesion. Made from durable materials for long-lasting reliability.
Key Features
Original levelling nuts for CreatBot printers
Used to adjust and calibrate the print bed
Ensures accurate nozzle-to-bed distance
Improves first-layer adhesion and print quality
Durable design for long service lifeSKU: n/a -
-
3D World, Pezzi di ricambio e accessori
Formbot T-Rex 2+ X-Axis Belt
The Formbot T-Rex 2+ X-Axis Belt is a genuine replacement timing belt for the printer’s X-axis motion system. It ensures precise and smooth movement of the print head across the build area, maintaining accuracy and consistent print quality. Durable rubber with fiberglass reinforcement provides long service life.
Key Features
Original X-axis timing belt for Formbot T-Rex 2+
Ensures precise and stable head movement
Made from durable rubber with fiber reinforcement
Maintains accuracy and print quality
Easy to install replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
Formbot Raptor / T-Rex Y-axis belt
The Formbot Raptor / T-Rex Y-Axis Belt is the original replacement timing belt for the Y-axis motion system. It ensures smooth and accurate movement of the print bed, maintaining precision and consistent print quality. Made from durable, fiber-reinforced rubber for long service life.
Key Features
Original Y-axis timing belt for Formbot Raptor / T-Rex
Provides precise and stable bed movement
Durable rubber with fiber reinforcement
Maintains accuracy and print quality
Easy to replaceSKU: n/a








































