3D World
Visualizzazione di 4579-4620 di 5560 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Raise3D N series Extruder Carriage
The Raise3D N-Series Extruder Carriage is a genuine spare part for the Raise3D N-Series, compatible with N2 and N2 Plus. It carries and aligns the extruders within the X/Y motion system for dual-extrusion printing.
Key Features
Original part for Raise3D N-Series
Compatible with Raise3D N2 and N2 Plus
Holds and aligns extruders in the X/Y system
Enables dual-extrusion operationSKU: 6970240722434 -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Flexible build surface plate
The BIQU B1 Flexible Build Surface Plate is a two-part system: a spring-steel sheet with a PEI surface and a soft magnetic base with adhesive. It provides strong first-layer adhesion and effortless part removal by flexing the plate. Sized for the BIQU B1 (235 × 235 mm), it installs in minutes by sticking the magnetic sheet to the heated bed and placing the plate on top.
Key Features
Designed for BIQU B1; 235 × 235 mm coverage
Two-part system: PEI-coated spring steel + soft magnetic base
Strong adhesion while printing; easy release by flexing
Tool-free installation—stick magnetic sheet, drop plate on top
Magnetic base not rated above 70 °C; ideal for low/medium bed temps
Reusable surface that’s easy to cleanSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D Stepper driver TMC2225 V1.0
The BIQU 3D Stepper Driver TMC2225 V1.0 is an original replacement driver optimized for the BIQU B1 series. It features Trinamic’s StealthChop2 for ultra-quiet motion and improved efficiency, plus full plug-and-play compatibility with the existing stepper hardware.
Key Features
Silent StealthChop2 motor control
Peak motor current up to 2 A via integrated MOSFETs
Supports SpreadCycle for highly dynamic motion
Single-wire UART interface for advanced configuration
Built-in diagnostics, OTP memory, passive braking
Direct drop-in replacement for BIQU B1 / B1 BlackSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D Filament run-out detection sensor module
The BIQU 3D Filament Run-out Detection Sensor Module is an original add-on designed to detect when filament runs out during printing. It pauses the print job to allow filament replacement, helping prevent failed prints and wasted material.
Key Features
Original BIQU accessory
Detects filament run-out during printing
Pauses print for easy filament change
Prevents failed prints and waste
Easy to install and reliable in useSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Thermistor
The BIQU B1 thermistor is an original replacement temperature sensor designed for precise thermal management in the BIQU B1 3D printer.
Key Features
Original replacement part for BIQU B1
Accurate temperature measurement
Ensures stable thermal management
Easy installation and reliable fit
Essential for consistent print qualitySKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Heating cartridge
The BIQU 3D B1 Heating Cartridge is a genuine replacement heating element for the BIQU B1 3D printer. It maintains correct extruder temperature by effectively heating the hotend with its 20 mm long cartridge profile.
Key Features
Original BIQU spare part
Specifically compatible with BIQU B1 (and BX) printers
20 mm cartridge length
Ensures reliable hotend temperature
Easy to replace for consistent extrusionSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Filament cooling fan
The BIQU B1 Filament Cooling Fan is a 24V 4010 turbine fan designed for the BIQU B1 3D printer. It cools the filament immediately after extrusion to improve print quality, surface finish and layer adhesion. Replacing a worn fan restores effective cooling and stable performance.
Key Features
Original 24V 4010 turbine fan for BIQU B1
Provides filament cooling directly after extrusion
Improves layer bonding and surface finish
Helps maintain overall print quality
Easy replacement with plug-in cable
Package includes: 1× BIQU B1 filament cooling fanSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Hot-end cooling fan
The BIQU B1 Hot-end Cooling Fan is a genuine replacement fan for the hotend of the BIQU B1 3D printer. It provides effective cooling of the heatsink and heatbreak, preventing heat creep and ensuring stable extrusion for high-quality prints.
Key Features
Original hotend cooling fan for BIQU B1
Ensures proper cooling of heatsink and heatbreak
Prevents heat creep and filament jams
Supports stable and reliable extrusion
Durable construction for long-term use
Easy to install and replaceSKU: XFS000163 -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Axis coupling
The BIQU B1 Axis Coupling is a genuine replacement part that connects the stepper motor to the lead screw of the printer. It ensures stable power transmission and precise movement, maintaining accuracy and consistent print quality.
Key Features
Original axis coupling for BIQU B1
Connects stepper motor and lead screw
Provides stable torque transmission
Prevents misalignment and vibration
Durable and long-lasting design
Easy to install and replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Brass nozzle 0,4 mm
The BIQU B1 0.4 mm Brass Nozzle is an original replacement nozzle tailored for the BIQU B1 printer. Crafted from brass with UM2-compatible threads, it delivers precise filament flow and reliable 3D printing performance.
Key Features
0.4 mm brass nozzle for the BIQU B1
UM2-compatible threading
Precise filament extrusion
Easy swap for maintenance
High-quality original spare partSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Quick coupling V6 PC4-01
The BIQU 3D B1 Quick Coupling V6 PC4-01 is a genuine replacement fitting designed for secure and reliable connection of PTFE Bowden tubes. It ensures smooth filament feeding, stable extrusion, and easy maintenance for consistent printing performance.
Key Features
OEM quick coupling fitting for BIQU B1
Compatible with V6 hotend setup
PC4-01 design for PTFE Bowden tubes
Ensures stable filament feeding and extrusion
Durable construction for long-term use
Easy installation and replacementSKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Quick coupling PC4-M6
The BIQU PC4-M6 Push Fitting is a reliable, high-precision connector designed for securing Bowden PTFE tubes in your 3D printers extruder or hotend setup. Built for compatibility with BIQU B1 and other FDM printers, it ensures smooth filament feeding and easy tube replacement.
Key Features
Compatible with 4 mm PTFE Bowden tubes
M6 thread for secure and universal fit
Strong metal construction for durability
Quick-connect design for easy installation
Reduces play and improves extrusion consistencySKU: n/a -
3D World, Pezzi di ricambio e accessori
BIQU 3D B1 Idler gear 2GT
Replacement idler gear/pulley for the BIQU B1, compatible with 2GT (GT2, 2 mm pitch) timing belts. Guides and tensions the X/Y belt for smooth and accurate motion.
Key Features
Compatibility: BIQU B1; for 2GT/GT2 timing belts used on X/Y axes.
Function: Free-spinning idler that maintains belt path and tension for stable positioning.
Direct 1:1 replacement fitting the original bracket/post (match belt profile and width to your original).
Helps reduce belt mis-tracking, slip, and ringing caused by worn or rough idlers.
Machined pulley with integrated bearings for low-friction rotation.
Installation tip: power off; release the belt tensioner, swap the idler, align parallel to the belt, re-tension firmly (not overtight), then re-home X/Y and run a short movement test.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality CR-5 Pro Top Cover
The Creality CR-5 Pro Top Cover transforms the printer’s cabinet into a fully enclosed chamber, making it easier to work with high-warping materials like ABS. It’s a smart upgrade for anyone aiming for more consistent prints and a more professional printing environment.
Key Features
Designed specifically for the CR-5 Pro
Converts the cabinet into a fully enclosed volume
Helps maintain stable printing conditions for tricky materials
Reduces draft, improves thermal control and minimizes warping
Easy to fit installation with matching cabinet frame
Lightweight design that adds functionality without bulkSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CP-01 Heat Break / Throat Tube
The Creality CP-01 Heat Break / Throat Tube is a precision-machined replacement that separates the hot and cold zones in the hotend, helping to maintain stable extrusion and reduce jams.
Key Features
Compatible with Creality CP-01
Maintains a reliable thermal barrier in the hotend
Helps reduce heat creep and filament jams
Smooth internal bore for consistent filament flow
Drop-in replacement, easy to install
Durable, precision-machined constructionSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F430 Y axis belt
Replacement Y-axis timing belt for the CreatBot F430. Transfers motion from the stepper and pulleys to the Y carriage for accurate, repeatable positioning during prints.
Key Features
Compatibility: CreatBot F430 (Y-axis timing/toothed belt).
Function: Provides precise motion transmission to the Y axis via the stock pulleys and idlers.
Direct 1:1 replacement matching the original belt path and hardware.
Restores proper tension and reduces backlash, slipping, or layer shifts from a worn belt.
Durable reinforced construction designed for continuous printer duty.
Installation tip: power off; release the tensioner, route as original without twists, set firm but not overtight tension, then re-home and verify Y travel.SKU: A25676A -
3D World, Pezzi di ricambio e accessori
CreatBot F430 X axis belt
The CreatBot F430 X-axis Belt is a genuine replacement timing belt for the X-axis of the CreatBot F430 3D printer. It ensures precise movement of the print head, maintaining accuracy and consistent print quality.
Key Features
Original X-axis timing belt for CreatBot F430
Provides accurate and smooth motion
Essential spare part for reliable performance
Durable and wear-resistant construction
Maintains print accuracy and quality
Easy to install and replaceSKU: A25675A -
3D World, Pezzi di ricambio e accessori
Phaetus Dragonfly hot-end BMO
Buy your new PHAETUS DRAGONFLY HOT-END BMO for better print quality and more posibilitys.
Features
All-metal kit, with overall high temperature resistance up to 500 ℃
The hot-end is mainly composed of copper alloy material
Conical fitting of heat break and heatsinkSKU: 6973090161026 -
3D World, Pezzi di ricambio e accessori
Raise3D Pro2 Teflon Throat Tube
The Raise3D Pro2 Teflon Throat Tube is a genuine replacement part designed for the hotend assembly of the Pro2 series. Made with high-quality PTFE (Teflon), it ensures smooth filament guidance, reduced friction, and reliable extrusion for consistent print quality.
Key Features
Compatible with Raise3D Pro2 3D printers
Made from high-quality PTFE (Teflon)
Ensures smooth and reliable filament feeding
Reduces friction and extrusion issues
Durable design for long-term useSKU: 6970240722397 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 Pro Silent Mainboard V4.2.7 – 32-bit
The Creality 3D Ender-3 Pro Silent Mainboard V4.2.7 (32-bit) is a genuine upgrade designed to deliver quieter printing and improved performance. With advanced silent stepper motor drivers, it reduces noise while ensuring smooth and precise motion control.
Key Features
Original Creality 32-bit silent mainboard
Compatible with Ender-3 Pro
Equipped with silent stepper motor drivers
Ensures smooth and accurate motion control
Plug-and-play replacement for easy installationSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-3 Silent Mainboard V4.2.7 – 32-bit
Buy this 32-bit Mainboard for your Creality Ender-3. Equipped with STM32F103 controller and TMC2225 stepper drivers.
Creality 3D Ender-3 Silent Mainboard V4.2.7 – 32-Bit
32-Bit Mainboard
STM32F103 controller
TMC2225 stepper drivers
Fits Creality Ender 3SKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D Glass Plate Clips – 19 mm – 4-pack
The Creality 3D Glass Plate Clips (19 mm) come in a convenient 4-pack and are designed to securely fasten the glass build plate to your 3D printer’s heated bed. Made from durable metal, they ensure stability, prevent shifting during prints, and provide reliable long-term use.
Key Features
4-pack of 19 mm clips for Creality 3D printers
Securely holds the glass build plate in place
Prevents movement or shifting during printing
Durable metal construction
Easy to install and replaceSKU: 24078 -
3D World, Pezzi di ricambio e accessori
Creality 3D Clips for Glass Fiber Plate – 15 mm – 4-pack
The Creality 3D Clips for Glass Fiber Plate (15 mm, 4-pack) are original accessories designed to securely hold the build plate in place during printing. Strong and durable, these clips ensure stability and prevent unwanted movement of the glass fiber plate.
Key Features
OEM clips for Creality 3D glass fiber plate
15 mm size, supplied in a 4-pack
Keeps the build plate firmly in place
Prevents slipping or shifting during printing
Durable construction for long-term use
Easy to install and replaceSKU: n/a -
3D World, Filamenti & Resine 3D
PrimaSelect Luvocom 3F PEKK 50082 – 1.75mm – 500g – Natural
PrimaSELECT™ Luvocom 3F 9581 PEKK (Polyether Ether Ketone) is a semicrystalline thermoplastic. 3D print this high-performance plastic with your 3D printer now. PEKK has high heat, chemical, and mechanical load resistance. Therefore, it is used to manufacture parts for the aerospace, gas, oil, medical and automotive industries.
Material properties PrimaSELECT™ Luvocom 3F 9581 PEKK:
Specially optimized for industrial 3D printing – Isotropic shrinkage characteristics
Nonflammable (UL94 V-0) & highly chemically resistant
Continuous service temperature of 255°C – Service temperature 300°C (during lifetime max. 200h)
Low warpingSKU: 7340002118154 -
-
-
3D World, Pezzi di ricambio e accessori
Creality 3D Filament Run Out Detection Sensor
Buy this Filament Run Out Detection Sensor for your Creality 3D CR-6 SE/Max 3D printer.
Creality 3D CR-6 SE/Max Filament Run Out Detection Sensor
Filament Run Out Detection Sensor
Fits your Creality 3D CR-6 SE/MaxSKU: n/a
