3D World
Visualizzazione di 4747-4788 di 5560 risultatiPopolarità
-
-
-
3D World, Pezzi di ricambio e accessori
Anet ET5 LCD Cable
Replacement LCD cable for the Anet ET5. Connects the front LCD/touch module to the mainboard to carry display data, backlight power, and (where applicable) touch signals.
Key Features
Compatibility: Anet ET5 (LCD/display module connection).
Function: Links the control board to the LCD for UI/status and, if fitted, touch input.
Direct 1:1 replacement matching factory routing and keyed connectors (verify connector type and length to your original).
Pre-terminated plugs or FPC/ZIF interface for solder-free installation.
Restores stable screen output, backlight, and responsive UI.
Installation tip: power off; observe ESD care; align connector orientation/Pin-1, lock ZIF tabs (if present), avoid sharp bends, and verify display in the menu.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Wanhao GR2 Mainboard
Replacement mainboard for the Wanhao GR2 resin printer. This central control PCB coordinates Z-axis motion and manages communication with the LCD panel, UV LED/light engine, touchscreen, and connected sensors.
Key Features
Compatibility: Wanhao GR2 (main control board).
Function: Controller for Z stepper, LCD imaging signals, UV LED trigger, touchscreen, and I/O.
Direct 1:1 replacement using factory connectors and mounting standoffs.
Restores reliable homing, exposure timing, and user interface functions.
Pre-terminated sockets for quick, solder-free service.
Installation tip: power off and observe ESD care; label cables; re-home Z and run exposure/level checks after replacement.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D N2 / Pro2 X/Y-axis Belt
The Raise3D N2 / Pro2 X/Y-axis Belt is a genuine replacement part designed to maintain precise motion control of your 3D printer. Made from durable, reinforced rubber materials, it ensures smooth transmission, accurate positioning, and consistent print quality over long-term use.
Key Features
Compatible with Raise3D N2 and Pro2 series
Reinforced rubber for long-lasting durability
Ensures precise and smooth motion control
Supports accurate X/Y-axis positioning
Reliable replacement for consistent print qualitySKU: 6970240721413 -
3D World, Pezzi di ricambio e accessori
Antclabs BLTouch extension cable SM-XD 1 m
The Antclabs BLTouch extension cable SM-XD 1 m is an original extension cable with XH connector for the BLTouch auto-leveling sensor. Designed to bridge longer distances in the printer, it ensures reliable signal transfer and clean cable routing.
Key Features
Original Antclabs extension cable (SM-XD) for BLTouch
XH-style connector
1 m length for flexible placement
Preserves reliable signal and tidy cable setup
Easy to install
Package includes: 1× extension cableSKU: SM-XD-1000 -
3D World, Pezzi di ricambio e accessori
Antclabs BLTouch extension cable SM-XD 1.5 m
The Antclabs BLTouch extension cable SM-XD (1.5 m) extends the connection between your BLTouch auto-leveling sensor and the controller board, providing flexibility in installation across various printer configurations.
Key Features
Genuine Antclabs accessory with XH-style connector
1.5 m length for enhanced routing flexibility
Shielded cable ensures stable, interference-free signal
Oxygen-free copper conductors for reliable performance
Plug-and-play installation—simply connect to BLTouch and board
Ideal for larger or modified 3D printer setupsSKU: SM-XD-1500 -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10S Build Surface sticker 410 x 410 mm
The Creality 3D CR-10S Build Surface Sticker (410 × 410 mm) is a genuine replacement sheet that refreshes your print bed. The textured surface helps first layers stick more consistently, while the peel-and-stick backing makes installation simple. It is sized for the CR-10S and works well with a heated bed.
Key Features
OEM build surface for Creality CR-10S
410 × 410 mm sheet with adhesive backing
Textured top layer for reliable first-layer adhesion
Works with common materials on a heated bed
Protects the platform and is easy to replace
Trim-friendly if minor adjustment is neededSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10S Mini Build Surface sticker 305 x 235 mm
Buy this Build Surface Sticker 305 * 235 mm for your Creality 3D CR-10S Mini 3D printer.
Creality 3D CR-10S Mini Build Surface Sticker 305 * 235 mm
Build Surface Sticker 305 * 235 mm
Fits Creality 3D CR-10S MiniSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10S Mini Glass Plate with Special Chemical Coating 305 x 235 mm
3D World, Pezzi di ricambio e accessoriCreality 3D CR-10S Mini Glass Plate with Special Chemical Coating 305 x 235 mm
The Creality CR 10S Mini Glass Plate is a factory-standard replacement build surface featuring a borosilicate glass core and proprietary chemical (carborundum) coating. It ensures strong first-layer adhesion during printing and effortless part removal as the bed cools—ideal for PLA, TPU, and ABS on CR 10S Mini and other 310 × 310 mm printers.
Key Features
• Borosilicate glass plate with special carborundum chemical coating
• Robust adhesion during hot prints; automatic release upon cooling
• Scratch- and wear-resistant surface with 8 Mohs hardness
• Flat, durable build surface ideal for high-temperature filaments
• Easy to clean with water or isopropyl alcohol
• Direct replacement for CR 10S Mini and other 310 × 310 mm Creality printersSKU: n/a -
3D World, Pezzi di ricambio e accessori
CreatBot F430 PCB Board
Replacement control PCB (mainboard) for the CreatBot F430. This central controller coordinates X/Y/Z motion and manages the dual-extruder heaters, temperature sensing, fans, endstops, touchscreen, and other I/O.
Key Features
Compatibility: CreatBot F430 (mainboard/control PCB).
Function: Drives stepper motors and controls heater outputs, thermistor/temperature inputs, fans, and peripherals; communicates with the display/touch interface.
Direct 1:1 replacement using factory connectors and mounting standoffs.
Restores reliable homing, temperature control, and stable toolhead communication.
Pre-terminated sockets for solder-free service; board revision may differ but matches original interfaces.
Installation tip: power off and observe ESD care; label cables, verify firmware/revision match, then re-home axes and test heat/fans.SKU: n/a -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 310 x 310 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117881 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 510 x 510 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117874 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 410 x 410 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117867 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 220 x 220 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117850 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 310 x 320 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117843 -
3D World, 3D-Stampanti e altro
Mayku FormBox Clear Sheets 1.0mm (20 Pack)
This new 1.0 mm PETg sheet offers the same reliable properties as the standard Cast Sheet but with added strength and durability. Its increased thickness makes it more rigid and slightly more heat-resistant, ideal for long-lasting mold creation and precise product prototyping. The material remains fully transparent, food-safe (FDA grade), and non-stick for clean results.
These sheets are 100% recyclable through domestic waste collection, making them a sustainable choice for high-quality modeling and professional applications.
SKU: 5060578580101 -
3D World, Pezzi di ricambio e accessori
PrimaCreator FlexPlate-Powder Coated PEI 235 x 235 mm
The Flexplate-Powder Coated PEI is the perfect surface to print on, it’s very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very to remove. Just give it a small bend and the print will pop right off.
Why should I use PrimaCreator FlexPlate-Powder Coated PEI?
Magnetic and flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use
Fits most printers
Strong and durableSKU: 7340002117836 -
3D World, Pezzi di ricambio e accessori
Creality 3D 3D Printer Enclosure 700 x 750 x 900
This 700 × 750 × 900 mm enclosure from Creality offers a controlled printing environment for larger printers, reducing drafts, dust and temperature fluctuations. Built with a sturdy iron-tube frame and flame-retardant aluminium-film interior, it also supports quieter operation and improved print quality. Ideal for both advanced hobbyists and professionals looking to upgrade their workspace.
Key Features
Dimensions: 700 × 750 × 900 mm
Compatible with Ender 5 Plus, CR-10S 300 and CR-10S Pro
Iron-tube frame with angle supports
Interior lining: flame-retardant aluminium film
Features tool pockets, inspection window and foldable design
Reduces warping, stabilises temperature and dampens noiseSKU: 6971636406860 -
3D World, Pezzi di ricambio e accessori
Creality 3D 3D Printer Enclosure 480 x 600 x 720
The Creality 3D Printer Enclosure (480 × 600 × 720 mm) provides a dedicated controlled chamber for your FDM printer, helping to reduce drafts, dust and temperature fluctuations. Its compact yet spacious design makes it a smart upgrade for both hobby and professional environments. Built with a sturdy frame and practical features, it offers improved print stability and cleaner results.
Key Features
Internal dimensions: 480 × 600 × 720 mm
Rigid frame structure for stable printer installation
Enclosed shell helps shield print from drafts and ambient changes
Transparent front panel allows monitoring without disruption
Compatible with a variety of printer models and setups
Easy to assemble and integrates smoothly into existing workspaceSKU: 0649910377170 -
3D World, Pezzi di ricambio e accessori
Micro Swiss Direct Drive Extruder with hotend for Creality CR-10 / Ender 3 Printers
3D World, Pezzi di ricambio e accessoriMicro Swiss Direct Drive Extruder with hotend for Creality CR-10 / Ender 3 Printers
Micro Swiss Direct Drive Extruder is a drop in system for CR10 / Ender Printers
Features
No modification required, simple plug and play
No printed brackets or sandwichesSKU: 0769407527656 -
3D World, Pezzi di ricambio e accessori
Creality 3D Ender-5 Plus Tempered Glass Plate
The Creality Ender-5 Plus Tempered Glass Plate is an original build surface upgrade that ensures better adhesion and easier print removal. Its durable, flat design reduces warping and improves overall print consistency.
Key Features
OEM tempered glass plate for Ender-5 Plus
Provides a flat and stable surface
Improved adhesion for various filaments
Easy to remove prints once cooled
Durable, scratch-resistant design
Helps achieve consistent print qualitySKU: 3007020050 -
3D World, Pezzi di ricambio e accessori
Zortrax M300 Plus / M300 Dual Spool Holder
The Zortrax Spool Holder is an official spare part designed to secure a filament spool at the back of the printer. It is compatible with the M300, M300 Plus, and M300 Dual models, ensuring stable material feeding during print jobs.
Key Features
OEM spool holder for Zortrax M300 series
Compatible with M300, M300 Plus, and M300 Dual
Securely attaches filament spools to the printer rear
Maintains consistent feeding and prevents interruptions
Durable design for long-term reliability
Direct-fit replacement for easy installationSKU: 5902280824091 -
3D World, Pezzi di ricambio e accessori
Zortrax M200 Plus / M300 Dual Spool Holder
The Zortrax M200 Plus / M300 Dual Spool Holder is an original spare part that secures filament spools at the rear of compatible printers. It is specifically designed for the M200 Plus and M300 Dual models, essential for stable filament feeding during printing.
Key Features
OEM spool holder for Zortrax M200 Plus and M300 Dual
Secures filament spools at printer rear
Ensures stable filament suspension and feeding
Dedicated compatibility with M200 Plus & M300 Dual
Durable design for uninterrupted printing
Easy direct-fit replacementSKU: 5902280823476 -
3D World, Pezzi di ricambio e accessori
MK10 Hardened Nozzle 0,4 mm (For all-metal hot-ends) – 1 pcs
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
Features
High-quality nozzle
State of the art factory
Tolerance is less than ± 0.01 mmSKU: 7340002112107 -
3D World, Pezzi di ricambio e accessori
MK10 Hardened Nozzle 0,2 mm (For all-metal hot-ends) – 1 pcs
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
Features
High-quality nozzle
State of the art factory
Tolerance is less than ± 0.01 mmSKU: 7340002112091 -
3D World, Pezzi di ricambio e accessori
RepRap M6 Nickel Plated Copper 0,8 mm – 1,75 mm – 1 pcs
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
Features
High-quality nozzle
State of the art factory
Tolerance is less than ± 0.01 mmSKU: 7340002112084 -
3D World, Pezzi di ricambio e accessori
RepRap M6 Nickel Plated Copper 0,6 mm – 1,75 mm – 1 pcs
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
Features
High-quality nozzle
State of the art factory
Tolerance is less than ± 0.01 mmSKU: 7340002112077 -
3D World, Pezzi di ricambio e accessori
RepRap M6 Nickel Plated Copper 0,4 mm – 1,75 mm – 1 pcs
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
Features
High-quality nozzle
State of the art factory
Tolerance is less than ± 0.01 mmSKU: 7340002112060 -
3D World, Pezzi di ricambio e accessori
RepRap M6 Nickel Plated Copper 0,25 mm – 1,75 mm – 1 pcs
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
Features
High-quality nozzle
State of the art factory
Tolerance is less than ± 0.01 mmSKU: 7340002112053 -
3D World, Pezzi di ricambio e accessori
PrimaCreator Tool Kit for 3D Printers
Includes the most common tools needed when working with 3D Printers. The tools come in a practical case that’s easy to store or to bring with you. The tools are safely stored and easily accessible.
Including
50 mm wide Scraper
Cutting Pliers
Long Nose Pliers
Feeding Path Cleaning Wire
Hex Wrench Set – 1,5, 2, 2,5, 3, 4, 5, 6 mm
Open Ended Wrenches – 6, 7, 8, 9 mmSKU: 0715235125663 -
3D World, Pezzi di ricambio e accessori
Raise3D Pro2 X/Y Stepper Driver Cables
The Raise3D Pro2 X/Y Stepper Driver Cables are genuine replacement cables designed for connecting the X- and Y-axis stepper driver modules to the mainboard in Raise3D Pro2 series printers. They ensure stable signal and power transmission for accurate motion control and consistent printing performance.
Key Features
Original stepper driver cables for Raise3D Pro2 X- and Y-axis
Ensures reliable signal and power delivery
Essential for precise motor control
Durable and shielded for interference protection
Easy to install and replace
Maintains consistent print qualitySKU: 6970240722595 -
3D World, Pezzi di ricambio e accessori
Raise3D E2 Power Supply Unit
The Raise3D E2 Power Supply Unit is a genuine replacement power module for the Raise3D E2 and E2CF 3D printers. It converts 100–240 V AC to 24 V DC at up to 350 W, ensuring stable and reliable power delivery for consistent printing performance.
Key Features
Original PSU for Raise3D E2 and E2CF
Input: 100–240 V AC, 50/60 Hz
Output: 24 V DC, 350 W
Includes overload, over-voltage, and over-temperature protection
Compact and durable construction (approx. 636 g)
Easy installation and replacementSKU: 6970240723103 -
3D World, Pezzi di ricambio e accessori
Raise3D E2 Right Extruder Model Cooling Fan
The Raise3D E2 Right Extruder Model Cooling Fan is a genuine replacement part designed to deliver optimal cooling performance. By providing directed airflow to the extruder, it helps maintain consistent print quality and prevents overheating during extended printing sessions.
Key Features
Compatible with Raise3D E2 3D printer (right extruder)
Ensures efficient model cooling
Prevents overheating for reliable performance
Supports consistent print quality
Durable and easy to replaceSKU: 6970240723080







































