3D World
Visualizzazione di 5125-5166 di 6446 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Artillery Hornet Power Supply
Replacement power supply for the Artillery Hornet 3D printer. It replaces the original AC-to-DC unit that powers the mainboard, heaters, and motors, ensuring stable and reliable operation.
Key Features
Compatibility: Artillery Hornet
Converts AC mains to the DC rail used by printer electronics
Direct 1:1 replacement for failed, unstable, or noisy units
Match output voltage/current and DC plug type to the original label
Regional mains cable/plug may vary; use correct cable for your region
Safety: disconnect from AC power before installation or serviceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Left Filament Cooling Fan – 40 x 40 x 10 mm
Original left filament cooling fan for Artillery Hornet 3D printers. This 40 × 40 × 10 mm, 24 V fan ensures stable airflow to cool the extruded filament, preventing overheating and improving print quality. Designed as a direct OEM replacement for the left-side cooling system.
Key Features
Compatible with Artillery Hornet
Left filament cooling fan
Size: 40 × 40 × 10 mm
Operating voltage: 24 V
Ensures stable filament cooling and print consistency
OEM replacement partSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Right Filament Cooling Fan – 40 x 40 x 10 mm
3D World, Pezzi di ricambio e accessoriArtillery Hornet Right Filament Cooling Fan – 40 x 40 x 10 mm
The Artillery Hornet Right Filament Cooling Fan (40 × 40 × 10 mm) is an original replacement part designed to provide effective cooling for printed layers. By maintaining optimal airflow, it improves adhesion, reduces warping, and ensures consistent print quality.
Key Features
Original cooling fan for Artillery Hornet
Dimensions: 40 × 40 × 10 mm
Provides stable airflow for filament cooling
Improves surface quality and layer adhesion
Durable and easy to installSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Hornet Print Head Fan – 30 x 30 x 10 mm
The Print Head Fan for Artillery Hornet is an original replacement cooling fan designed to maintain optimal hotend performance. Measuring 30 × 30 × 10 mm and operating at 24 V, it provides stable airflow for efficient cooling, helping prevent overheating and support consistent extrusion quality.
Key Features
Original print head cooling fan for Artillery Hornet
Dimensions: 30 × 30 × 10 mm
Operating voltage: 24 V
Provides stable airflow for efficient cooling
Helps prevent hotend overheating
Easy to install and replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-6 Max Tempered Glass Plate
The Creality CR-6 Max Tempered Glass Plate is an OEM replacement build surface designed for the CR-6 Max printer series. Measuring 420 × 430 × 4 mm, this high-quality plate features a durable carborundum coating that enhances part adhesion during printing while providing easy part removal once the bed cools down.
Key Features
Precisely sized at 420 × 430 × 4 mm for perfect fit on CR-6 Max
Carborundum surface texture improves first-layer adhesion—no glue needed
No warping—tempered glass remains flat under repeated heating
Easy part release once cooled, making print removal simple
Reusable and easy to clean for long-term performanceSKU: 4004090053 -
3D World, Pezzi di ricambio e accessori
Bondtech LGX™ X-carriage for MK3S & Mosquito
The Bondtech LGX™ X-carriage for MK3S & Mosquito is an original part designed to mount the LGX extruder together with the Slice Engineering Mosquito hotend on the Prusa MK3S. It ensures stable positioning, proper alignment, and reliable performance for high-quality printing.
Key Features
Original Bondtech X-carriage
Compatible with Prusa MK3S and Mosquito hotend
Provides stable and precise mounting
Supports accurate nozzle alignment
Durable construction for long-term use
Easy to install as a replacement partSKU: 7350011414758 -
3D World, Pezzi di ricambio e accessori
Bondtech LGX™ for MK3S & Mosquito
This is a LGX™ upgrade kit to use on Prusa MK3S and MK3S+. Only with Mosquito or Mosquito Magnum hotends from Slice Engineering.
A compatible X-carriage and Mosquito hotend are required.
If you don’t have them yet, check and add the optional items below.SKU: 7350011414789 -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-3040 Pro 5010 Axial fan
The Creality 3D CR-3040 Pro 5010 Axial Fan is a compact cooling fan designed to maintain stable airflow inside the CR-3040 Pro. The 50×50×10 mm form factor provides efficient, directed cooling for components that benefit from continuous air circulation, supporting consistent print quality during long jobs. It’s a straightforward replacement for worn fans and helps keep the system running reliably.
Key Features
Designed for Creality CR-3040 Pro
Compact 50×50×10 mm axial form factor
Steady airflow for stable, repeatable print results
Durable construction suited for extended runtime
Straightforward swap for aging or noisy fans
Helps maintain consistent temperatures around critical componentsSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-3040 Pro 6025 Axial fan
The Creality CR-3040 Pro 6025 Axial Fan is an OEM replacement fan for the printer enclosure, designed to provide effective cooling and maintain stable operating temperatures. It helps reduce heat buildup, improves reliability, and supports consistent print quality under long or high-demand prints.
Key Features
OEM 6025 axial fan for Creality CR-3040 Pro
60 × 60 × 25 mm size
12 V operating voltage
High-speed airflow to reduce heat buildup
Durable build for continuous operation
Easy drop-in replacement for your enclosure fanSKU: n/a -
3D World, Pezzi di ricambio e accessori
F160/DX/DE X,Y motor (42HS48)
Stepper motor for the X and Y axes of CreatBot F160, DX, and DE 3D printers. Original CreatBot part (type 42HS48) with directly installed cable—no connector required.
Key Features
Original CreatBot spare part
Compatible with F160, DX, and DE models
Type: 42HS48 stepper motor
Cable permanently attached—no connector neededSKU: n/a -
3D World, Pezzi di ricambio e accessori
Snapmaker 2.0 Air Purifier
Overall features
Tailor-made Filter Cartridge for PM and VOCs filtration
High filtration efficiency of 95.9% for PM0.3
Real-time monitoring on the Filter Cartridge status and lifespan
Fan speed control
Color Status Light
Consistant full-metal design
Compatible with all current and future Snapmaker 2.0 addons
The Air Purifier must be used together with the Enclosure for Snapmaker 2.0SKU: 6971573447100 -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-30 Belt kit
The Creality 3D CR-30 Belt Kit is an official replacement set designed for the belt-driven system of the CR-30. Built to original specifications, it restores smooth and accurate motion and helps keep the printer running reliably over time.
Key Features
OEM belt kit for Creality CR-30
Restores precise belt-driven motion
Built to original factory specifications
Durable materials for long-term use
Supports consistent print quality
Quick and easy installationSKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D Heated Bed Thermal Sensor
The Raise3D heated bed thermal sensor is the official replacement thermistor for the heated build plate, compatible with Raise3D E2 printers. It ensures accurate bed temperature readings and reliable print performance.
Key Features
OEM thermistor for the Raise3D heated bed
Compatible with Raise3D E2 (and E2CF) series
Ensures precise temperature sensing
Easy to install
Package includes: 1× thermal sensorSKU: 6970240727538 -
-
3D World, Pezzi di ricambio e accessori
Bondtech HeatLink Molex MX-50-57-9002
The Bondtech HeatLink cable with Molex MX-50-57-9002 connector is a 50 mm plug-and-play interface cable designed to connect Bondtech 300 °C thermistors to supported 3D printers, including Prusa i3 MK3/S/+, MK2/S, and MK2.5/S models. It offers a reliable solution without soldering or crimping.
Key Features
Length: 50 mm interface cable
Molex MX-50-57-9002 connector
Compatible with Bondtech 300 °C thermistors
Plug-and-play installation
Direct fit for Prusa i3 MK3/S/+, MK2/S, MK2.5/SSKU: 7350011413584 -
3D World, Pezzi di ricambio e accessori
Bondtech HeatLink JST SMP-02V-BC
The Bondtech HeatLink cable with JST SMP-02V-BC connector is a 50 mm plug-and-play interface cable designed to connect Bondtech 300 °C thermistors and 50 W heaters to supported 3D printers such as the Creality Ender-5, Ender-5 Pro, and Ender-5 Plus. It provides a simple and reliable solution without soldering or crimping.
Key Features
Length: 50 mm interface cable
JST SMP-02V-BC connector
Compatible with 300 °C thermistors and 50 W heaters
Plug-and-play installation
Direct fit for Creality Ender-5, Ender-5 Pro, Ender-5 PlusSKU: 7350011413577 -
3D World, Pezzi di ricambio e accessori
Bondtech HeatLink JST VHR-2N
The Bondtech HeatLink JST VHR-2N is a 50 mm plug-and-play interface cable that connects Bondtech 50 W heaters or 300 °C thermistors to 3D printers. It features a Molex Micro-Fit 3.0 male connector on one end and a JST VHR-2N connector on the other, making it a direct-fit solution for printers such as the Creality CR-10S Pro, CR-10S V2, CR-10 Max, and CR-10 V3.
Key Features
Length: 50 mm interface cable
Molex Micro-Fit 3.0 male to JST VHR-2N
Compatible with Bondtech 50 W heaters and 300 °C thermistors
Plug-and-play installation
Direct-fit for Creality CR-10S Pro, V2, Max, V3 and othersSKU: 7350011413560 -
3D World, Pezzi di ricambio e accessori
Bondtech HeatLink JST XHP-2
The Bondtech HeatLink JST XHP-2 is an interface cable designed to connect HeatLink thermistors and heaters to compatible 3D printers. Equipped with a Molex Micro-Fit 3.0 connector on one end and a JST XHP-2 on the other, it offers a plug-and-play solution for secure and reliable connections without soldering or crimping.
Key Features
HeatLink interface cable
Molex Micro-Fit 3.0 to JST XHP-2 connector
Plug-and-play installation
Designed for Bondtech thermistors and heaters
Secure and reliable electrical connection
Eliminates the need for soldering or crimpingSKU: 7350011413553 -
3D World, Pezzi di ricambio e accessori
Bondtech HeatLink JST XH-2 With Lock
The Bondtech HeatLink JST XH-2 With Lock is a compact 50 mm interface cable designed for easy and secure connections of high-temperature thermistors or heaters. With a Molex Micro-Fit 3.0 connector on one end and a locking JST XH-2 on the other, it offers a plug-and-play solution that eliminates the need for soldering or crimping, while ensuring a safe and reliable fit.
Key Features
50 mm interface cable with Molex Micro-Fit 3.0 male connector and JST XH-2 with lock
Developed for connecting thermistors rated up to 300 °C
Compact design for clean installation inside the printer control box
Compatible with several Creality models, including CR-10S Pro, Pro V2, Max, V2, and V3
Locking JST connector prevents accidental unplugging and ensures stable operationSKU: 7350011413546 -
3D World, Pezzi di ricambio e accessori
Bondtech HeatLink 12v 50W Heater
The Bondtech HeatLink 12 V 50 W Heater is a plug-and-play heating cartridge with a Molex Micro-Fit 3.0 female connector. It features a Ø 6 mm stainless steel housing and a 1.5 m long cable with red sleeves. Combine it with a HeatLink interface cable for easy printer connection, without soldering or crimping.
Key Features
12 V, 50 W heating
Ø 6 mm stainless steel housing
Molex Micro-Fit 3.0 female connector
1.5 m cable with red sleeves
Plug-and-play with HeatLink interface cablesSKU: 7350011412389 -
3D World, Pezzi di ricambio e accessori
Bondtech HeatLink 24v 50W Heater
Plug & Play Heater
1.5m leads with black sleeves and Molex micro-fit 3.0 female connector
Ø 6mm Stainless Steel cartridge with laser engraved Bondtech logo, SKU, electric specification and date of packaging
24v 50W heating element
Packed in plastic bag.SKU: 7350011412372 -
3D World, Pezzi di ricambio e accessori
Slice Engineering RepRap M6 Vanadium Nozzle 0,3 mm – 1,75 mm – 1 pcs
3D World, Pezzi di ricambio e accessoriSlice Engineering RepRap M6 Vanadium Nozzle 0,3 mm – 1,75 mm – 1 pcs
Lifetime warranty against abrasion
Wear resistant, plastic repellent coating
Made of Vanadium HSS, hardened and tempered to 64 Rockwell C.
Available in multiple orifice sizesSKU: 0850005423188 -
3D World, Pezzi di ricambio e accessori
Slice Engineering Torque Wrench 1,5 Nm
Features
Specifically designed for changing nozzles
1.5 Nm torque provides correct seal to prevent leaking plastic
Perfect tool for one-handed nozzle change when paired with The Mosquito Hotend™
Fits Vanadium Nozzles™ natively, with just enough wiggle room for that baked on plastic
Fits other styles nozzles with off-the-shelf adaptersSKU: 0850005423300 -
3D World, Pezzi di ricambio e accessori
Slice Engineering PT1000 RTD 500°C Temperature Sensor
The Slice Engineering PT1000 RTD is a premium platinum temperature sensor designed for high-performance 3D printing. It provides accurate and linear temperature readings up to 500 °C, housed in a stainless steel cartridge with 2 m bare leads for easy integration. Durable, precise, and versatile, it ensures stable thermal control for demanding applications.
Key Features
Platinum RTD sensor with linear response
Measures temperatures from −50 °C to 500 °C
IEC 60751 Class B accuracy
Durable stainless steel cartridge design
2 m bare leads for easy installation
All-metal construction, made in USASKU: 0850005423461 -
-
3D World, Pezzi di ricambio e accessori
Slice Engineering Mosquito Magnum hotend
Revised Features
New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs
New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette.Main Benefits
The Mosquito Magnum prints up to 20% faster than any other hotend on the market
A thermal insulator protects the extended melt zone from the effects of active cooling, and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito
The melt zone is extended proximally upwards to maintain a small form factor
A multi extrusion setup with both high flow and high resolution optimized designs can be created without needing to purchase new nozzles or make carriage modifications to accommodate hotends of different sizesOh yeah, and you can change the nozzle with one hand.
Mosquito Magnum is only available for 1.75 mm filament at this time.
SKU: 0850005423096 -
3D World, Pezzi di ricambio e accessori
Slice Engineering Mosquito hotend
— Now with new version —
Revised Features
New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs
New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette.Main Benefits
Superior heat break performance
Increased structural rigidity
Larger temperature operating range
Modular/adaptable to almost any FFF/FDM printer
Ideal for multi-extrusion systems
LightweightOh yeah, and you can change the nozzle with one hand.
Mosquito is only available for 1.75 mm filament at this time.
SKU: 0850005423102 -
3D World, Pezzi di ricambio e accessori
Stainless Steel Resin Funnel with Filter
A stainless steel resin funnel with reusable filter designed to strain unused UV/SLA/DLP/LCD resin efficiently. The rigid 304 stainless construction resists corrosion and is easy to clean for repeated use.
Key Features
304 stainless steel body for durability and corrosion resistance
Reusable mesh filter removes cured particles and debris
Easy cleaning with a wipe and isopropyl alcohol (IPA)
Fits common resin bottle necks (≈16 mm or larger)
Also suitable for paints, varnishes, and other non-aggressive liquidsSKU: n/a
