3D World
Visualizzazione di 3445-3486 di 5572 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Flashforge Guider 3 USB Port
The Flashforge Guider 3 USB Port is an original replacement part for the Guider 3 3D printer. It allows convenient file transfer from a USB drive directly to the printer, ensuring reliable data input and smooth operation. Replacing the USB port restores full connectivity in case of damage or wear.
Key Features
Original spare part for the Flashforge Guider 3.
Provides direct USB connectivity for file transfer.
Ensures reliable data input and stable printer operation.
Simple to install and replace if damaged.
Restores full functionality of the printer’s interface.SKU: 6937120303497 -
3D World, Pezzi di ricambio e accessori
BIGTREETECH SKR V3 EZ 32-Bit Motherboard
The BIGTREETECH SKR V3 EZ 32 Bit Motherboard is a high-performance control board powered by a 480 MHz ARM Cortex-M7 (STM32H743VI), capable of handling demanding user interfaces and seamless, stutter-free printing. Compatible with both EZ series and TMC stepper drivers, it supports motor voltages up to 48 V (with appropriate drivers) and works with popular open-source firmware platforms such as Marlin, Klipper, and RepRap. Its flexible voltage options and extensive connectivity make it an ideal upgrade for serious 3D printing enthusiasts.
Key Features
480 MHz ARM Cortex M7 processing power
Adjustable motor voltage up to 48 V via jumpers
Supports both EZ and TMC-compatible stepper drivers
Works with Marlin, Klipper, and RepRap firmware
Extensive onboard I/O: micro SD, WiFi modules, BLTouch, filament detect
Robust safety features: thermistor protection and replaceable fuseSKU: 6973828110357 -
3D World, 3D-Stampanti e altro
Ortur Smoke Purifier 1.0
Ortur Smoke Purifier 1.0 offers fast smoke removal and efficient purification. The purifier can with its powerful 3-layer filtration function filter 0.3μm, achieving 99,97% purification rate.
Highlights:
Powerful 3-layer Filtration
High Air Volume of 258m³/h
Noise lower than 50dB
99.97% Purification RateSKU: 28752 -
3D World, 3D-Stampanti e altro
Ortur Y-axis Rotary Chuck
Ortur Y-axis rotary chuck can not only be used for chuck rotary and ring rotary, but also sphere rotary. Multiple modes can use more than 90% cylindrical and even irregular objects to meet all your needs.
Highlights:
Multi-mode Function
Adjustable Stable Design
Adjusted Diameter
Wide CompatibilitySKU: 28751 -
3D World, Laser
Ortur Aufero Laser 2 Extension Kit
This extension kit can increase the engraving area with 153%, allowing you to create both more and bigger. The kit is compatible with the Ortur Aufero Laser 2.
Highlights:
Engraving Area at 390 x 600 mm
Reinforced Aluminium Alloy
Easy to ReplaceSKU: 28748 -
3D World, Pezzi di ricambio e accessori
Bondtech CHT BiMetal MK8 Coated Nozzle 4 pcs
Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).
Bondtech CHT BiMetal MK8 Coated Nozzle Advantages:
Abrasive-proof to work with Carbon and Glass fiber composite materials
Higher melt capacity by increasing the surface area of the heating walls
Flow Rate gains between 25 and 65%
Competitive price/performance price
Machined with ultra-precision
Copper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surfaceSKU: 7350011416288 -
3D World, Pezzi di ricambio e accessori
Bondtech CHT BiMetal Vol Coated Nozzle 4 pcs
Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your Volcano style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).
Will fit the following blocks/printers:
E3D Volcano blocks
Other Volcano type blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder
Others compatible with VolcanoSKU: 7350011416295 -
3D World, Pezzi di ricambio e accessori
Bondtech CHT BiMetal RepRap Coated Nozzle 4 pcs
Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).
Will fit the following blocks/printers:
Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6SKU: 7350011416271 -
3D World, Pezzi di ricambio e accessori
Bondtech CHT BiMetal MK8 Coated Nozzle
Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).
Bondtech CHT BiMetal MK8 Coated Nozzle Advantages:
Abrasive-proof to work with Carbon and Glass fiber composite materials
Higher melt capacity by increasing the surface area of the heating walls
Flow Rate gains between 25 and 65%
Competitive price/performance price
Machined with ultra-precision
Copper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surfaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Bondtech CHT BiMetal RepRap Coated Nozzle
Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your RepRap M6 style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).
Will fit the following blocks/printers:
Mosquito® / Magnum
Mosquito® Liquid
Mosquito® Magnum+
Copperhead™
E3D Chimera and Kraken
E3D V4, V5 and V6 blocks
Prusa i3, Prusa Mini
RepRap M6SKU: n/a -
3D World, Pezzi di ricambio e accessori
Bondtech CHT BiMetal Vol Coated Nozzle
Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your Volcano style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).
Will fit the following blocks/printers:
E3D Volcano blocks
Other Volcano type blocks
Artillery Sidewinder X1 and X2
Anycubic Vyper
FLSUN Super Racer
Artillery Genius Pro
Anycubic Kobra and Kobra Max
Lulzbot TAZ MOARstruder
Others compatible with VolcanoSKU: n/a -
3D World, Filamenti & Resine 3D
Siraya Tech Craft – 1 kg – Glow In The Dark
Introducing Craft resin by Siraya Tech, a line of resin that offers unique visual and material properties. Craft – Glow In Dark is designed for work for most MSLA priners. How long it glows depends on how strong the light source is and the duration of the charge. Please read the user guide before your first print.
Features
Up to 4 hours glow effect
Rechargeable in any light
Ideal for outdoor applications
Smooth surface finish
Low odorSKU: 0768564746160 -
3D World, Filamenti & Resine 3D
Siraya Tech Craft – 1 kg – High Clear
Are you still worried about the yellowing of transparent resin? Come check out Siraya Tech Craft High Clear Resin!
Features:
Resist Yellowing
High Clear and High Transparency Resin
High resolution & Smooth surface finish
Low odor and Easy to printSKU: 0768564741165 -
3D World, Filamenti & Resine 3D
Siraya Tech Blu – 1 kg – Nylon Black
An easy to use tough resin that performs under stress. The material properties are balanced between strength and hardness. Siraya Tech Blu resin is ideal for making functional parts that are strong yet with some flexibility.
Key Material Properties:
Great for making functional parts
Formulated for LCD resin printer but can work for DLP printers
Fast and Easy to Print. Best when resin temperature is above 25°C
Smooth surface with great resolution
Easy to wash, post cure, paint and sandSKU: 0768564741615 -
3D World, Filamenti & Resine 3D
Siraya Tech Blu – 1 kg – Obsidian Black
An easy to use tough resin that performs under stress. The material properties are balanced between strength and hardness. Siraya Tech Blu resin is ideal for making functional parts that are strong yet with some flexibility.
Key Material Properties:
Great for making functional parts
Formulated for LCD resin printer but can work for DLP printers
Fast and Easy to Print. Best when resin temperature is above 25°C
Smooth surface with great resolution
Easy to wash, post cure, paint and sandSKU: 0768564746610 -
3D World, Filamenti & Resine 3D
Siraya Tech Cast – 1 kg – True Blue
Are you looking for an affordable quality 3D printing castable resin?
Introducing Cast, a high-resolution, easy to print castable resin by Siraya Tech.Features
Easy to Print
Cast Cleaner
Use common burnout schedule with popular powders
Field-tested by professionalsSKU: 0768564741738 -
-
3D World, Filamenti & Resine 3D
Siraya Tech Tenacious – 1 kg – 65D Obsidian Black
3D printing resin with great flexibility and strength for your UV LCD and DLP 3D printer.
Key Properties:
Great flexibility, strength, and impact resistant
Formulated for LCD resin printer but can work for DLP printers
Easy to print. Best when resin temperature is above 25°C
Great by itself or when mixed with other 405nm UV resinsSKU: 0768564746733 -
3D World, Filamenti & Resine 3D
Siraya Tech Sculpt – 1 kg – Clear
Are you looking for that ideal resin with a smooth injection mold-like look and beautiful color for your latest model design? Introducing Sculpt, the premium resin for model makers. With special high-temperature resistance formula.
Feature
Smooth Surface Finishes
High Resolution
Easy to Clean and sandSKU: 0768564744739 -
3D World, 3D-Stampanti e altro
Raise3D MetalFuse
MetalFuse offers a complete solution, consisting of an indirect metal 3D printing process, paired with a special edition of ideaMaker compatible with MIM equipment. With this solution, MetalFuse’s advantages include low overhead costs and the ability to perform batch production. MetalFuse saves more energy and is more environmentally friendly when compared to processes such as CNC and SLM (Selective Laser Melting).
Highlights:
Massive build area
Improved printout density
Intuitive one-click interface
Environmentally friendly productionSKU: n/a -
3D World, 3D-Stampanti e altro
Raise3D S200-C
The S200-C is a vacuum sintering device from Raise3D. It serves as a part of the new MetalFuse solution that also includes the large-format metal 3D printer Forge1 and D200-E debinding device. The system is aimed at high performance, better repeatability, smooth post-processing, and environmental safety.
Highlights:
Faster sintering
Low gas consumption
Adjustable mobility
Environmentally friendly solutionSKU: n/a -
3D World, 3D-Stampanti e altro
Raise3D D200-E
The D200-E is a debinding device from Raise3D. It serves as a part of the new MetalFuse solution that also includes the large-format metal 3D printer Forge1 and S200-C vacuum sinter. The system is aimed at high performance, better repeatability, smooth post-processing, and environmental safety.
Highlights:
High performance
Improved printout density
Adjustable mobility
Environmentally friendly solutionSKU: n/a -
3D World, 3D-Stampanti e altro
Raise3D Forge1
The Forge 1 is part of the Raise3D MetalFuse full metal solution (including the D200 – E debinding device and S200 – C vacuum sinter) developed in cooperation with BASF and Forward AM as material partners. Metal-filled filament is printed on the Forge 1, and resulting green parts must go through debinding and sintering processes before being ready for use.
Highlights:
Massive build area
Time-effective technology
Improved printout density
Environmentally friendly productionSKU: 6970240723820 -
3D World, Filamenti & Resine 3D
BASF Ultrafuse Support Layer
The BASF Ultrafuse Support Layer filament was developed to be processed in combination with the Ultrafuse Metal filaments. It serves as a support material for the object and creates a barrier during sintering so that they can be easily decoupled from the component. The Ultrafuse Support Layer filament is not suitable for the production of stand-alone components.
Highlights:
Printable on any metal FFF printer
Allows for a wider range of designs and complex geometries to be printed
Excellent surface quality of supported areas of the part
Minimize the distortion of the printed part during debinding and sintering
Simplified workflow for preparing parts for sinteringSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse 17-4 PH Metal
Forward AM Ultrafuse® 17-4 PH Metal is a metal-filled filament designed to enable the production of high-strength stainless steel parts using standard FFF 3D printing workflows. It combines the flexibility of filament-based printing with the performance of precipitation-hardened stainless steel. The material is suitable for functional metal components with complex geometries. Ultrafuse® 17-4 PH Metal is developed for professional and industrial manufacturing environments.
Key Features
Metal filament based on 17-4 PH stainless steel
Enables production of high-strength metal parts
Suitable for complex and functional geometries
Compatible with standard FFF 3D printers
Supports debinding and sintering workflows
Designed for professional and industrial useSKU: 8718969926331 -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse 316L
Forward AM Ultrafuse® 316L is a metal-filled filament developed for producing stainless steel parts using standard FDM 3D printers. After printing, parts are debound and sintered to achieve dense, fully metallic components. This makes Ultrafuse® 316L a practical solution for functional metal parts, prototypes, and small-series production.
Key Features
Metal-filled filament based on stainless steel 316L
Enables metal part production on standard FDM printers
Suitable for functional parts and prototypes
High corrosion resistance after sintering
Supports complex geometries and internal channels
Designed for professional and industrial workflowsSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse BVOH
Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials: PLA, PLA PRO1, ABS, ABS Fusion+, PA and PAHT CF15.
Highlights:
Water soluble
Dissolves 2 times faster than other PVA
Support compatible with multiple materialsSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse PPSU
Forward AM Ultrafuse® PPSU is a high-performance polymer filament developed for demanding applications that require exceptional thermal and chemical resistance. It offers excellent mechanical strength and long-term stability, even in harsh environments. The material is well suited for functional parts exposed to high temperatures and aggressive chemicals. Ultrafuse® PPSU is designed for professional and industrial 3D printing.
Key Features
High-performance PPSU filament
Excellent thermal and chemical resistance
Strong and dimensionally stable material
Suitable for demanding functional parts
Maintains properties under harsh conditions
Developed for professional applicationsSKU: 8718969926096 -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse TPS 90A
Ultrafuse TPS 90A is an elastomer based on the raw material SEBS. Compared to other flexible 3D printing materials it shows more rubber-like soft touch haptics and better non-slip properties. Furthermore, the material has a low moisture uptake, which allows for printing without pre-drying.
Highlights:
Soft touch
Non-slip properties
Reduced moisture uptake
Excellent layer adhesion
Very good low-temperature flexibilitySKU: n/a -
3D World, Filamenti & Resine 3D
BASF Ultrafuse TPU 95A
Ultrafuse TPU’s have been developed specially fro enable fast and easy printing with a flexible filament for Fused Filament Fabrication. With its outstanding abrasion resistance, Ultrafuse TPU 95A presents an excellent choice for wear and tear applications. Parts printed with this material set themselves apart by high elongation at break, great layer adhesion and a good resistance to oils as well as industrially used chemicals.
Highlights:
High wear and abrasion resistance
Easy to handle
Good resistance to oils and commonly used industrial chemicals
Printable on direct drive and some bowden style printers
Compatible with water soluble support material Ultrafuse BVOHSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse TPU 64D
Building on BASF‘s decades of experience in flexible materials, this material is based on the established thermoplastic polyurethane Elastollan, standing for maximum reliability, consistent product quality and cost efficiency. Ultrafuse TPU 64D is easily compatible with water soluble support. Thanks to its property profile, Ultrafuse TPU64D presents an excellent alternative to rubber and ABS for the manufacturing of tools, jigs, and fixtures.
Highlights:
High resistance to oils, greases, oxygen and ozone
High wear and abrasion resistance
High impact resistance
Compatible with water soluble support
Printable on direct drive and bowden style printersSKU: n/a -
3D World, Filamenti & Resine 3D
BASF Ultrafuse TPU 85A
Ultrafuse TPU 85A has excellent resistance to hydrolysis and good flexibility at low temperature, resistance to microbiological attack, good wear performance, high tensile strength, good damping behavior.
Highlights:
High wear and abrasion resistance
High tensile strength and outstanding resistance to tear propagation
Excellent damping characteristics
Very good low-temperature flexibility
High resistance to oils, greases, oxygen and ozoneSKU: 8718969924979 -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse PET CF15
Ultrafuse PET CF15 contains 15% carbon fiber and is a functional 3D printing material optimized to meet your requirements. Its high dimensional stability and very low moisture absorption make it a perfect material in a humid environment. Ultrafuse PET CF15 combines easy processability, very low moisture uptake with a high level of strength and stiffness at an affordable cost.
Highlights:
Strong, rigid components
Easy to process
Very low moisture absorption
Heat resistant up to 108 °C
High dimensional stability
Compatible with BVOH and HIPS for support
Excellent surface finishSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse PAHT CF15
Ultrafuse PAHT CF15 is a high-performance 3D printing filament that opens new application fields in FFF printing. In parallel to its advanced mechanical properties, dimensional stability, and chemical resistance, it has very good processability. It works in any FFF printer with a hardened nozzle.
Highlights:
Higher chemical resistance than most PA grades
High temperature resistance up to 150°C
Strong and stiff parts
High dimensional stability
Easy to process
Low moisture absorptionSKU: n/a -
3D World, Filamenti & Resine 3D
BASF Ultrafuse PP GF30
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range.
Highights:
Excellent chemical resistance
Low density
Low moisture uptake
High heat resistance
Improved UV resistanceSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse PC GF30
Ultrafuse PC GF30 contains 30% of special glass fibers that are designed for filament making and 3D printing. With its high heat deflection temperature and good dimensional stability, Ultrafuse PC GF30 is the right material to use in an industrial invironment where good temperature resistance and high strength is needed.
Highlights:
V0 flame class rated
Resilience to UV light
Good temperature resistance
Flame retardant
High stiffness and strength
Good heat deflection temperature
High dimensional stability
Very low moisture absorptionSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse PA6 GF30
Ultrafuse PA6 GF30 contains 30% of special glass fibers that aredesigned for filament making and 3D printing. PA6 GF30 has a reduced warping compared to neat PA6 which makes Ultrafuse PA6 GF30 with its excellent layer adhesion and its compatibility with the watersoluble Ultrafuse BVOH the right solution for industrial parts printable on any standard FFF printer.
Highlights:
Very high stiffness and strength
Good chemical resistance
Resistance to UV light
High wear resistance
Excellent layer adhesion
Works with BVOHSKU: n/a -
3D World, Filamenti & Resine 3D
BASF Ultrafuse PC/ABS FR
Ultrafuse PC/ABS FR is a V-0 flame retardant blend of Polycarbonate and Acrylonitrile Butadiene Styrene, two of the most used thermoplastics for engineering & electrical applications.
Highlights:
Fulfills flame retardancy according to UL 94 V-0 (for 1.5 & 3.0 mm thickness)
Outstanding aesthetics
Strong layer adhesion
High print speeds possibleSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse PP
Ultrafuse PP is a high-performance thermoplastic with low density, high elasticity and high resistance to fatigue. The mechanical properties of make it an ideal material for 3D-printing applications, that have to endure high stress or strain.
Highlights:
Low density
Chemical resistant
Resistant to fatigue
Elasticity and toughness
InsulationSKU: n/a -
3D World, Filamenti & Resine 3D
Forward AM Ultrafuse PA
Ultrafuse PA is specially developed for 3D printing and it is based on BASF´s polyamide portfolio known as Ultramid.The filament has unique mechanical properties due to its chemical structure. This makes it suitable for a wide range of applications working within a larger temperature range.
Highlights:
Good fatigue resistance
Low melting point makes it printable for many FFF printers
Good wear resistance/lubricitySKU: 8718969924993
