Pezzi di ricambio e accessori
Visualizzazione di 3949-3990 di 4709 risultatiPopolarità
-
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 580mm, red and black, E-VH39.6, 20AWG SW-X1 heating tube
3D World, Pezzi di ricambio e accessoriArtillery Sidewinder X1 580mm, red and black, E-VH39.6, 20AWG SW-X1 heating tube
Buy this 580 mm, red & black, E-VH39.6, 20AWG SW-X1 Heating Tube for your Artillery Sidewinder X1 3D printer.
Artillery Sidewinder X1 580mm, red & black, E-VH39.6, 20AWG SW-X1 Heating Tube
580mm, red & black, E-VH39.6, 20AWG SW-X1 Heating Tube
Fits Artillery Sidewinder X1SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Touch Screen Cable – Dual 8 Heads 4-Pin
3D World, Pezzi di ricambio e accessoriArtillery Sidewinder X1 Touch Screen Cable – Dual 8 Heads 4-Pin
Replacement touch screen cable (Dual 8 Heads 4-Pin version) for the Artillery Sidewinder X1. Links the front touch display/HMI to the mainboard, carrying UI/data and power for stable screen and touch operation.
Key Features
Compatibility: Artillery Sidewinder X1; cable spec: “Dual 8 Heads 4-Pin” (match to your original).
Function: Connects the touch display module to the control board for interface and status.
Direct 1:1 replacement with keyed 4-pin connectors; no soldering required.
Pre-terminated harness for plug-and-play service; routes in the factory path.
Restores stable screen/backlight and reliable touch input.
Installation tip: power off; observe connector orientation (Pin-1), secure latches, and avoid tight bends.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Phaetus Dragon Silicone Sock
The Phaetus Dragon Silicone Sock is an original replacement sleeve designed for the Phaetus Dragon high-flow hotend. Made of high-quality heat-resistant silicone, it provides effective insulation for the heater block, promoting faster heat-up, improved temperature stability, and enhanced print quality. It also protects the hotend from filament residue and reduces heat radiation into surrounding components.
Key Features
Original Phaetus accessory for Dragon hotends
Heat-resistant silicone — usable up to around 280 °C
Improves heat retention and temperature stability
Makes hotend easier to clean and protects against residue
Helps reduce heat transfer to surrounding partsSKU: 6973090160913 -
3D World, Pezzi di ricambio e accessori
Dragon HeatBlock
The Dragon HeatBlock is a high-quality replacement component designed for Dragon hotends. Built from durable, heat-resistant materials, it ensures stable temperature control and reliable performance during demanding prints. Perfect for maintaining consistent extrusion and extending the lifespan of your hotend.
Key Features
Original heatblock for Dragon hotends
Provides stable thermal performance
Made from durable, heat-resistant materials
Supports consistent extrusion during long prints
Easy to install as a replacement part
Helps extend the life of your hotendSKU: 6973090160906 -
3D World, Pezzi di ricambio e accessori
Dragon HeatSink_Black
The Dragon HeatSink Black is a high-quality replacement part for Dragon hotends. Its durable anodized aluminum design ensures efficient heat dissipation, keeping the hotend stable and preventing heat creep during long prints. With a sleek black finish, it combines reliable function with a professional look.
Key Features
Original heatsink for Dragon hotends
Made from anodized aluminum for durability
Provides efficient heat dissipation
Prevents heat creep and maintains stable printing
Sleek black finish for a professional appearance
Easy installation as a replacement partSKU: 6973090160920 -
3D World, Pezzi di ricambio e accessori
Phaetus Dragon HeatSink_Blue
The Phaetus Dragon HeatSink Blue is made from anodized aluminum and designed for Dragon hotends. It provides efficient heat dissipation to keep the hotend stable and helps prevent heat creep during longer prints. The blue anodized finish adds durability and a distinctive look.
Key Features
Original heatsink for Dragon hotends
Anodized aluminum construction
Efficient heat dissipation
Helps prevent heat creep
Durable blue anodized surface
Easy to install as a replacement partSKU: 6973090160647 -
3D World, Pezzi di ricambio e accessori
Phaetus Dragon HF HeatBreak Kit
The Phaetus Dragon HF HeatBreak Kit is a high-performance replacement part designed for the Dragon HF hotend. With its advanced bi-metallic construction, it provides excellent thermal isolation between the heating and cooling zones, enabling faster heat dissipation and stable extrusion. It’s ideal for users who want consistent printing results even at high flow rates.
Key Features
Specifically designed for the Dragon HF hotend
Bi-metallic structure for efficient thermal isolation
Supports high-flow printing without loss of stability
Improves extrusion consistency at high speeds
Durable and precise manufacturing
Easy to install as a direct replacement partSKU: 6973090160630 -
3D World, Pezzi di ricambio e accessori
Phaetus Dragon ST HeatBreak Kit
The Phaetus Dragon ST HeatBreak Kit is a genuine replacement designed for the Dragon ST hotend. Made from a copper alloy with a nickel plating, it provides excellent thermal conductivity and wear resistance. The heatbreak ensures stable temperature separation between the hot and cold zones, reducing the risk of heat creep and improving print consistency. Perfect for maintaining reliable performance with engineering-grade materials.
Key Features
Original heatbreak kit for Dragon ST hotend
Nickel-plated copper alloy for durability
Excellent thermal conductivity
Prevents heat creep and improves stability
Optimized for engineering-grade filaments
Easy to install as a replacement partSKU: 6973090160623 -
3D World, Pezzi di ricambio e accessori
Phaetus PS Hardened Steel Ruby Nozzle V2 0,8 mm – 1,75 mm – 1 pcs
3D World, Pezzi di ricambio e accessoriPhaetus PS Hardened Steel Ruby Nozzle V2 0,8 mm – 1,75 mm – 1 pcs
Phaetus PS Hardened Steel Ruby Nozzle V2 with a 0.8 mm orifice for 1.75 mm filament. Hardened steel body with a ruby tip provides wear resistance for abrasive filaments while maintaining dimensional accuracy.
Key Features
Size: 0.8 mm nozzle; Filament: 1.75 mm; Quantity: 1 pc.
Material: hardened steel body with ruby (corundum) tip for high wear resistance.
Use case: ideal for carbon/glass-fiber filled, glow-in-the-dark, and other abrasive materials.
Function: stable extrusion and roundness retention over long service life.
Compatibility: for hotends that accept this Phaetus PS Ruby Nozzle V2 format—check thread/length against your original before ordering.
Installation tip: hot-tighten at printing temperature; do not over-torque; avoid nozzle crashes to protect the ruby tip.SKU: 6973090160814 -
3D World, Pezzi di ricambio e accessori
Phaetus PS Hardened Steel Ruby Nozzle V2 0,4 mm – 1,75 mm – 1 pcs
3D World, Pezzi di ricambio e accessoriPhaetus PS Hardened Steel Ruby Nozzle V2 0,4 mm – 1,75 mm – 1 pcs
The Phaetus PS Hardened Steel Ruby Nozzle V2 0.4 mm – 1.75 mm is a premium nozzle designed for extreme durability and precision. Made from hardened steel with a ruby tip, it offers excellent wear resistance and stable extrusion when printing abrasive or standard filaments.
Key Features
V2 hardened steel nozzle with ruby insert
Orifice size: 0.4 mm
Compatible with 1.75 mm filament
Exceptional wear resistance for abrasive filaments
Ensures precise and smooth extrusion
Durable construction for long service lifeSKU: 6973090160791 -
3D World, Pezzi di ricambio e accessori
Phaetus PS M6 Plated Copper Nozzle 0,8 mm – 1,75 mm – 1 pcs
In the process of 3D printing, PEEK, PEKK, PEI, PSU, PPSU and other filaments who can be melted above 300℃ are called high-temperature filaments. The ordinary brass nozzle cannot complete its printing. The thermal conductivity of the nozzle made of copper alloy is 330W/m.k, and the maximum printing temperature can reach 500℃, which can solve the problem of rapid heating of high-temperature filaments and continuous printing, effectively extending the service life of the nozzle.
Features
Min. Orifice Diameter φ0.25
Tolerance ±0.01mm
Inner Hole Roughness ≤Ra0.4μm
Concentricity ≤0.02mm
Hardness 6 Mohs
Maximum printing Temperature 500°C
Thermal Conductivity 330W/m·k
Expansion Coefficient 16.7μm/m·℃SKU: 6973090160258 -
3D World, Pezzi di ricambio e accessori
Phaetus PS M6 Plated Copper Nozzle 0,6 mm – 1,75 mm – 1 pcs
In the process of 3D printing, PEEK, PEKK, PEI, PSU, PPSU and other filaments who can be melted above 300℃ are called high-temperature filaments. The ordinary brass nozzle cannot complete its printing. The thermal conductivity of the nozzle made of copper alloy is 330W/m.k, and the maximum printing temperature can reach 500℃, which can solve the problem of rapid heating of high-temperature filaments and continuous printing, effectively extending the service life of the nozzle.
Features
Min. Orifice Diameter φ0.25
Tolerance ±0.01mm
Inner Hole Roughness ≤Ra0.4μm
Concentricity ≤0.02mm
Hardness 6 Mohs
Maximum printing Temperature 500°C
Thermal Conductivity 330W/m·k
Expansion Coefficient 16.7μm/m·℃SKU: 6973090160241 -
3D World, Pezzi di ricambio e accessori
Phaetus PS M6 Plated Copper Nozzle 0,4 mm – 1,75 mm – 1 pcs
In the process of 3D printing, PEEK, PEKK, PEI, PSU, PPSU and other filaments who can be melted above 300℃ are called high-temperature filaments. The ordinary brass nozzle cannot complete its printing. The thermal conductivity of the nozzle made of copper alloy is 330W/m.k, and the maximum printing temperature can reach 500℃, which can solve the problem of rapid heating of high-temperature filaments and continuous printing, effectively extending the service life of the nozzle.
Features
Min. Orifice Diameter φ0.25
Tolerance ±0.01mm
Inner Hole Roughness ≤Ra0.4μm
Concentricity ≤0.02mm
Hardness 6 Mohs
Maximum printing Temperature 500°C
Thermal Conductivity 330W/m·k
Expansion Coefficient 16.7μm/m·℃SKU: 6973090160227 -
3D World, Pezzi di ricambio e accessori
Phaetus PS M6 Hardened Steel Nozzle 0,8 mm – 1,75 mm – 1 pcs
The Phaetus PS-M6 Hardened Steel Nozzle (0.8 mm, 1.75 mm) is a premium OEM nozzle designed for abrasive and high-temperature 3D printing. Made from hardened steel, it offers exceptional wear resistance and thermal stability to handle advanced composite filaments and engineering plastics.
Key Features
Hardness above HRC60 for minimal wear, even with abrasive materials
Temperature resistance up to 450 °C for demanding filaments like PEEK
Burr-free tip and ultra-smooth inner bore (Ra < 0.4 µm) for reliable extrusion
Diameter tolerance ±0.01 mm and roundness ≤ 0.02 mm
Compatible with M6 hotends including Phaetus Dragon, Dragonfly, E3D V6, and clonesSKU: 6973090160203 -
3D World, Pezzi di ricambio e accessori
Phaetus PS M6 Hardened Steel Nozzle 0,6 mm – 1,75 mm – 1 pcs
The Phaetus PS M6 Hardened Steel Nozzle 0.6 mm is a high-quality replacement nozzle designed for 1.75 mm filament systems. Made from hardened steel, it offers excellent resistance against abrasive filaments such as carbon fiber, glass fiber, or glow-in-the-dark materials, ensuring long-lasting performance and reliable extrusion.
Key Features
Durable hardened steel construction
0.6 mm nozzle diameter
Compatible with 1.75 mm filament
Excellent wear resistance for abrasive filaments
Ensures consistent extrusion and print quality
1 piece includedSKU: 6973090160197 -
3D World, Pezzi di ricambio e accessori
Phaetus PS M6 Hardened Steel Nozzle 0,4 mm – 1,75 mm – 1 pcs
The Phaetus PS M6 Hardened Steel Nozzle 0.4 mm is a high-performance nozzle designed for 1.75 mm filament. Its hardened steel construction makes it ideal for abrasive materials such as carbon fiber, glass fiber, and glow-in-the-dark filaments, ensuring long service life and consistent extrusion quality.
Key Features
0.4 mm hardened steel nozzle
Compatible with 1.75 mm filament
Excellent wear resistance for abrasive materials
Ensures consistent extrusion and print quality
Durable design for long-term use
M6 thread for wide printer compatibilitySKU: 6973090160173 -
3D World, Pezzi di ricambio e accessori
Volcano Compatible Silicone Cover V2
Silicone cover (“sock”) for Volcano-style heater blocks. Insulates the hotend to reduce heat loss and plastic buildup while keeping the nozzle tip accessible.
Key Features
Compatibility: Volcano-format heater blocks (E3D-style and equivalents); not intended for standard V6/MK8 blocks.
Function: Thermal insulation for more stable temperatures and less effect from part-cooling airflow and drafts.
Cleanliness: Helps prevent melted filament from sticking and carbonizing on the block.
Material: High-temperature silicone; flexible, form-fitting cover with nozzle opening.
Installation: Fit on a cold hotend; slide over the block, align with the nozzle opening and heater/thermistor exits; avoid pinching wires.
Maintenance: Replace if torn, deformed, or heavily charred; check clearance around the nozzle after fitting.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Raise3D Heater Rod Power Supply Cable
Replacement power supply cable for the Raise3D heater rod (hotend heater cartridge). Provides the high-current DC path from the control/power output to the heater rod for stable heating performance.
Key Features
Compatibility: Raise3D printers using a heater rod in the hotend (match connector type and length to your original).
Function: Supplies regulated DC power to the heater cartridge from the board/PSU output.
Direct 1:1 replacement with factory-style, keyed connectors—no soldering required (variant-dependent).
High-temperature insulation and strain relief suited for toolhead motion.
Restores reliable preheat and temperature stability when original wiring is worn or intermittent.
Installation tip: power off; route away from sharp edges and moving belts; keep separate from thermistor leads; verify connector orientation and run a preheat test.SKU: 6970240721581 -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Power Supply
Replacement power supply for the Artillery Sidewinder X1. Replaces the original AC-to-DC unit that powers the mainboard, heaters, and motors to ensure stable operation.
Key Features
Compatibility: Artillery Sidewinder X1.
Function: Converts AC mains to the DC rail used by printer electronics.
Direct 1:1 replacement for failed, unstable, or noisy power units.
Match output voltage/current and DC connector type to the original label.
Uses the printer’s existing mounting points and wiring path.
Safety: disconnect from AC power before service; verify polarity and ground connection.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 PTFE Tube – ∅2 x ∅4 / 20 mm
The Artillery Sidewinder X1 PTFE tube – ∅2 × ∅4 mm, length 20 mm – is the genuine PTFE liner designed for the Sidewinder X1 and Genius hotends. It provides a smooth filament path into the hotend to prevent clogs and maintain print quality.
Key Features
Original PTFE liner tube for Sidewinder X1 and Genius printers
Inner diameter 2 mm, outer diameter 4 mm
Length 20 mm
Smooth filament guidance to prevent jams
Easy to replace
Package includes: 1× PTFE tubeSKU: n/a -
-
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Extruder Cover
The Artillery Sidewinder X1 Extruder Cover is the original protective housing for the extruder motor and ribbon cable area. It shields components from debris, improves safety, and keeps cables tidy. Replacing a damaged cover helps maintain print reliability.
Key Features
Original extruder cover for Artillery Sidewinder X1
Protects motor and ribbon cable from dust and debris
Helps secure cable and reduce wear
Easy to install
Maintains clean appearance
Package includes: 1× extruder coverSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Levelling Nuts – 4-pack
The Artillery Sidewinder X1 Levelling Nuts (4-pack) are original replacement parts for the Sidewinder X1 3D printer. They are used to manually adjust and level the build plate, ensuring proper adhesion and consistent print quality.
Key Features
Levelling nuts for Artillery Sidewinder X1
Pack of 4 pieces
Used to adjust and level the build platform
Ensures correct first-layer adhesion
Durable and easy to replaceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Extruder Arm
The Extruder Arm for the Artillery Sidewinder X1 is a replacement support component that mounts and stabilizes the extruder along the X-axis of the printer.
Key Features
Compatible with Artillery Sidewinder X1
Supports the extruder’s weight and alignment on the X-axis
Helps reduce filament misfeeds and improve print quality
OEM spare part
Easy to install
Ensures stable operation during high-speed movesSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery X1 Z-axis Coupler
Replacement Z-axis coupler for the Artillery Sidewinder X1. Connects the Z stepper motor shaft to the lead screw and transfers torque for reliable vertical motion.
Key Features
Compatibility: Artillery Sidewinder X1 (Z-axis motor-to-lead-screw coupling).
Function: Mechanical shaft coupler linking the stepper shaft to the Z lead screw.
Direct 1:1 replacement; fits the original motor and lead screw interfaces.
Helps restore smooth Z travel and reduce wobble from worn or slipping couplers.
Machined metal body with set screws for a secure, concentric grip.
Installation tip: power off; align shafts, match the set screw to the flat, tighten evenly, and avoid bottoming the shafts.SKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Fan Mesh – 40 mm
Protective fan mesh (40 mm) for the Artillery Sidewinder X1. It mounts over the 40 mm fan to prevent debris and accidental contact while maintaining proper airflow for cooling performance.
Key Features
Compatible with Artillery Sidewinder X1 using 40 mm fans
Acts as a guard against dust, filament strands, and accidental finger contact
Standard 40 mm pattern with 4-corner mounting holes
Mesh design ensures airflow with minimal restriction
Easy installation using existing fan screws
Note: Fan not included; check fan orientation before reassemblySKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Shaft Sleeve
The Artillery Sidewinder X1 Shaft Sleeve is a genuine replacement part designed to protect and support the printer’s moving shafts. Made from durable materials, it helps reduce wear, ensures smooth motion, and maintains long-term reliability of the motion system.
Key Features
Compatible with Artillery Sidewinder X1 3D printer
Protects and supports motion shafts
Reduces wear and extends service life
Ensures smooth and stable movement
Durable and reliable constructionSKU: n/a -
3D World, Pezzi di ricambio e accessori
Artillery Sidewinder X1 Heat Sink
The Artillery Sidewinder X1 Heat Sink is an original replacement part designed for the hotend assembly of the Sidewinder X1 3D printer. It dissipates heat effectively, preventing heat creep and ensuring consistent extrusion performance.
Key Features
OEM heat sink for Artillery Sidewinder X1
Part of the hotend assembly
Prevents heat creep for stable extrusion
Durable and precisely machined design
Easy to replace during maintenanceSKU: n/a -
3D World, Pezzi di ricambio e accessori
Creality 3D CR-10 V2 Translate box kit
The Creality CR-10 V2 Translate Box Kit is a spare part for the CR-10 V2 printer, providing a translation or adapter box for its control or electrical components.
Key Features
Designed for Creality CR-10 V2
Adapter/translate box for control electronics
Helps protect or extend control box functionality
OEM spare part
Easy to install
Affordable maintenance or upgrade optionSKU: n/a -
3D World, Pezzi di ricambio e accessori
Micro Swiss Direct Drive Extruder (Extruder Only) for Creality CR-10 / Ender 3 Printers
3D World, Pezzi di ricambio e accessoriMicro Swiss Direct Drive Extruder (Extruder Only) for Creality CR-10 / Ender 3 Printers
Micro Swiss Direct Drive Extruder is a drop in system for CR10 / Ender Printers
Features
No modification required, simple plug and play
No printed brackets or sandwichesSKU: 0769407527663 -
-
-
